Charge sharing and alignment performance of bent ALPIDEs measured with low-energy protons Journal: Nuclear Physics A
Berkin Ulukutlu, Christopher Ehrich, Laura Fabbietti, Roman Gernhäuser, Fabrizio Grosa, Hartmut Hillemanns, Tobias Jenegger, Alex Kluge, Lukas Lautner, Magnus Mager, Lukas Ponnath, Andrea Rossi, Isabella Sanna, Serhiy Senyukov, Johanna Stachel, Miljenko Šuljić, Laszlo Varga, Alperen Yüncü · 2026
Read Charge sharing and alignment performance of bent ALPIDEs measured with low-energy protons Journal: Nuclear Physics A by Berkin Ulukutlu, Christopher Ehrich, Laura Fabbietti, Roman Gernhäuser, Fabrizio Grosa, Hartmut Hillemanns, Tobias Jenegger, Alex Kluge, Lukas Lautner, Magnus Mager, Lukas Ponnath, Andrea Rossi, Isabella Sanna, Serhiy Senyukov, Johanna Stachel, Miljenko Šuljić, Laszlo Varga, Alperen Yüncü (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-30150.txt.
Introduction
Berkin Ulukutlu and seventeen colleagues test silicon pixel sensors bent into curves for a major detector upgrade. The ALICE experiment at CERN plans to replace its innermost tracking layers. The new sensors are wafer-scale CMOS chips bent to small radii. This study uses ALPIDE chips, the current generation, in bent form. Proton beams at three energies probe their behavior.
The beams scatter elastically off a polypropylene fiber target. Two tracker arms, with sensors bent at three radii, reconstruct the protons. The team studies clustering in events with high energy loss. Bending shows no significant impact on cluster size. Alignment strategies are checked against simulations using track benchmarks. Distance of closest approach and opening angle both serve as tests. The achieved resolution matches simulation expectations closely. Bent sensors look suitable for future high-energy physics detectors.
Catalog record
| CREATOR | Berkin Ulukutlu, Christopher Ehrich, Laura Fabbietti, Roman Gernhäuser, Fabrizio Grosa, Hartmut Hillemanns, Tobias Jenegger, Alex Kluge, Lukas Lautner, Magnus Mager, Lukas Ponnath, Andrea Rossi, Isabella Sanna, Serhiy Senyukov, Johanna Stachel, Miljenko Šuljić, Laszlo Varga, Alperen Yüncü |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2606.30150
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Charge sharing and alignment performance of bent ALPIDEs measured with low-energy protons Journal: Nuclear Physics A Berkin Ulukutlu, Christopher Ehrich, Laura Fabbietti, Roman Gernhäuser, Fabrizio Grosa, Hartmut Hillemanns, Tobias Jenegger, Alex Kluge, Lukas Lautner, Magnus Mager, Lukas Ponnath, Andrea Rossi, Isabella Sanna, Serhiy Senyukov, Johanna Stachel, Miljenko Šuljić, Laszlo Varga, Alperen Yüncü Abstract The upgrade of the ALICE experiments Inner Tracking System (ITS3) aims to replace its innermost detection layers with bent wafer-scale CMOS MAPS sensors. This study examines the performance of ALPIDE chips, currently used in the ALICE ITS2, when operated in a bent configuration under realistic experimental conditions. Proton beams with energies of 80 MeV , 120 MeV and 200 MeV 80\text{\,}\mathrm{MeV}120\text{\,}\mathrm{MeV}200\text{\,}\mathrm{MeV} were used to study proton-proton elastic scattering on a polypropylene fiber target reconstructed using two opposing arms of trackers with sensors bent to radii of 18 mm , 24 mm and 30 mm 18\text{\,}\mathrm{mm}24\text{\,}\mathrm{mm}30\text{\,}\mathrm{mm} . The measured low-momentum protons provided a testbed for investigating clustering behavior in high-energy loss events, where no significant impact of bending was observed on cluster size. Additionally, alignment strategies for bent detectors were evaluated using the distance of closest approach (DCA) and opening angle between scattered proton tracks as benchmarks. The achieved resolution matches expectations from simulations, confirming the suitability of bent MAPS sensors for future high-energy and nuclear physics applications. 1 Introduction The ALICE (A Large Ion Collider Experiment) [ 11 ] detector at the Large Hadron Collider (LHC) [ 21 ] is aiming to upgrade its Inner Tracking System (ITS) [ 19 , 3 ] to improve the tracking and vertexing capabilities of the experiment. The existing tracking system, ITS2, features seven concentric layers of Monolithic Active Pixel Sensors (MAPS) [ 30 , 2 ] and allows for an impact parameter (defined as the distance of closest approach between a primary track and the interaction point) resolution of 30 \mu m in both the radial and longitudinal directions for 1\text{\,}\mathrm{GeV} /c transverse momentum pions [ 25 ] . The upcoming ITS3 upgrade planned during the LHC Long Shutdown 3 (LS3) aims to push the boundaries of silicon detector technology further by replacing the innermost three layers, currently built of traditional flat sensors, with bent wafer-scale MAPS detectors [ 16 ] thinned down to approximately 50\text{\,}\mathrm{\SIUnitSymbolMicro m} , which can be bent into cylindrical shapes and wrapped around the beam pipe. By eliminating the need for extensive support structures and cooling systems, bent detectors can significantly reduce the per-layer material budget: the bent silicon sensor contributes only \approx 0.07% X_{0} for ITS3, compared with \approx 0.36% X_{0} for an ITS2 inner-barrel layer including its mechanical support and services. This material budget reduction, together with a closer positioning of the innermost layers and the reduced beam-pipe radius and thickness foreseen for the upgrade, is expected to improve the impact parameter resolution by up to a factor of two with respect to the ITS2 detector [ 3 ] . The reduction of the material budget is even more important in inverse kinematic heavy-ion experiments at lower energies, as in the R3B [ 7 ] experiment at FAIR [ 8 ] , Germany, or in the Samurai [ 20 ] experiment at RIKEN, Japan. The reconstruction of vertices and particle momenta in these experiments is typically limited by the position resolution and multiple scattering in the first layers of the recoil tracking detector. Replacing the currently used silicon strip detectors [ 15 ] , first with thin monolithic pixel sensors and ultimately with bent wafer-scale MAPS, exhibiting a position resolution better than \sigma_{x}<10 \mu m, will address both limitations at the same time. The extremely low material budget will not only reduce secondary reactions and background contributions, but will also significantly improve the reconstruction of particle trajectories, thereby enabling a new level of precision in particle four momentum reconstruction. First implementations of this technology are already on their way [ 9 ] . The introduction of bent wafer-scale silicon detectors represents a significant technological leap. The impact of bending on the sensor performance and stability, both mechanical and electronic, needs to be studied. For this purpose, large-scale mechanical samples and functional MAPS devices, specifically ALPIDEs [ 23 , 2 ] , have been tested in a bent configuration. It was observed that 50\text{\,}\mathrm{\SIUnitSymbolMicro m} thinned silicon devices can reliably be operated long-term with bending radii down to 18\text{\,}\mathrm{mm} [ 5 ] . Additionally, bending did not noticeably affect either the pixel performance or the operation of the readout periphery of the sensor [ 3 , 27 ] . Notably, piezoresistive effects in bent ALPIDE sensors can induce shifts in analog supply current and threshold voltages [ 27 ] , which could in principle affect charge collection uniformity across sensors at different bending radii. In the present study, individual threshold calibrations are performed for each sensor to ensure uniform operating conditions, as described in Section 3 . In this study, we evaluate the performance of a detector consisting of five bent ALPIDE chips operated under realistic experimental conditions. The detector is set up in a fixed target configuration with the aim of reconstructing elastic (p,p) collisions exploiting proton beams of different energies ( 80\text{\,}\mathrm{MeV}120\text{\,}\mathrm{MeV}200\text{\,}\mathrm{MeV} ) and a solid polypropylene target. The conducted experiment provides a testbed for two open questions directly relevant to ITS3: (i) whether bending alters the charge-sharing and cluster formation properties of MAPS sensors under high-energy-loss conditions — a regime not previously studied in bent configurations — and (ii) whether cylindrical detector geometries with limited track sampling can be aligned to the multiple-scattering limit without external reference detectors. Previous studies with bent structures were limited to minimum ionizing particle signals [ 6 ] , leaving high-ionization performance uncharacterized. The extrapolation of these results to operational ITS3 conditions requires the assumption that bending-induced effects scale monotonically, though not necessarily linearly, from the tested radii of 18\text{\,}\mathrm{mm}30\text{\,}\mathrm{mm} to the ITS3 design radius of 19\text{\,}\mathrm{mm} , and that the proton beam test conditions adequately probe the relevant charge transport properties of the sensor. No radius-dependent effects are observed across this range in the present data (Section 3 ), supporting this assumption. For the R3B and Samurai programmes, the experiment directly emulates the tracking conditions of interest, with low-energy recoil protons traversing thin bent detectors. Furthermore, alignment strategies for the cylindrical geometry, needed to maximize the impact parameter resolution, are tested and compared. The results of this study provide critical insights into the feasibility and benefits of using bent wafer-scale detectors in future high-energy and nuclear physics experiments. 2 Experimental Setup The experiment is conducted at the Cyclotron Center Bronowice, Poland, a medical facility equipped with a Proteus C-235 cyclotron [ 13 ] . The accelerator complex provides proton beams of variable energies to the experimental hall where the detector setup was located. The setup involves a small telescope featuring bent ALPIDE chips configured to measure scattered protons from a target array at three different beam energies of 80\text{\,}\mathrm{MeV}120\text{\,}\mathrm{MeV}200\text{\,}\mathrm{MeV} . Figure 1 : Photos of the detector setup. The used target fiber array (top left). Outer bent ALPIDE layer (bottom left). Full barrel installed in the beam setup (right). 2.1 Sensor The ALPIDE (ALICE Pixel Detector) is a state-of-the-art particle tracking sensor developed for the