Non-thermal Sources from Stereoscopic Hard X-ray and Earth-based Microwave Observations in a Data-Constrained Magnetohydrodynamic Simulation

Keitarou Matsumoto, Satoshi Inoue, Meiqi Wang, Bin Chen, Muriel Zoë Stiefel, Säm Krucker, Satoshi Masuda, Haimin Wang · 2026

Read Non-thermal Sources from Stereoscopic Hard X-ray and Earth-based Microwave Observations in a Data-Constrained Magnetohydrodynamic Simulation by Keitarou Matsumoto, Satoshi Inoue, Meiqi Wang, Bin Chen, Muriel Zoë Stiefel, Säm Krucker, Satoshi Masuda, Haimin Wang (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-29979.txt.

Introduction

Keitarou Matsumoto and seven colleagues study a powerful solar flare from October 2024. The X7.1 event occurred in the active region numbered 13842. They combine hard X-ray images with microwave observations from California. They also run a three dimensional simulation of magnetic gas above the Sun. Two spacecraft viewed the flare from different angles. That geometry lets the team locate emission sources in height.

The height of the main looptop source matches between both methods. Fast electrons glow there, above the flare loops. A second microwave source sits along a southward plasma ejection. It lines up with a stretched current sheet, where magnetic energy releases. That source shines only from the southern segment. Magnetic reconnection therefore seems to differ between strong and weak field regions. Spectral fits suggest a higher low energy cutoff for its electrons.

Catalog record

CREATORKeitarou Matsumoto, Satoshi Inoue, Meiqi Wang, Bin Chen, Muriel Zoë Stiefel, Säm Krucker, Satoshi Masuda, Haimin Wang
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE54 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.29979

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Non-thermal Sources from Stereoscopic Hard X-ray and Earth-based Microwave Observations in a Data-Constrained Magnetohydrodynamic Simulation Keitarou Matsumoto, Satoshi Inoue, Meiqi Wang, Bin Chen, Muriel Zoë Stiefel, Säm Krucker, Satoshi Masuda, Haimin Wang Abstract We analyze the X7.1 flare on 2024 October 1 from NOAA AR 13842 using hard X-ray (HXR) imaging, microwave observations by the Expanded Owens Valley Solar Array (EOVSA), and a three-dimensional Magnetohydrodynamic (MHD) simulation. The flare was observed from two vantage points, with Solar Orbiter/Spectrometer Telescope for Imaging X-rays viewing the flare near the limb and Advanced Space-based Solar Observatory/Hard X-ray Imager and EOVSA observing it on the disk. We carried out a data-constrained MHD simulation using a nonlinear force-free field extrapolation as the initial condition and constrained the height of the non-thermal looptop source from stereoscopic HXR and microwave observations. The height is consistent between the stereoscopic analysis and the MHD simulation. A secondary non-thermal microwave source aligned with a southward plasma ejection corresponds to an elongated current sheet. Although the current sheet grows in multiple directions, the secondary microwave emission is observed only from the southern segment. This localization suggests reconnection in regions with different magnetic field strengths. Reconnection in strong-field regions produces flare arcades with dominant looptop emission, whereas reconnection in weaker southern regions gives rise to secondary microwave emission at higher altitudes. The height of the secondary source is consistent between the stereoscopic analysis and the MHD simulation. Microwave spectral fitting suggests a higher low-energy cutoff for non-thermal electrons in the secondary microwave source than in the main looptop source. This may reflect the transport of electrons pre-accelerated near the looptop source by the southward plasma ejection. I Introduction In solar flares, accelerated electrons often produce hard X-rays (HXR) and microwave emissions, which are commonly used to diagnose non-thermal electrons, although both wavelength ranges can also include thermal components. The non-thermal HXR mainly originates from energetic electrons and is often produced at footpoints of coronal loops ( 16 ) . The non-thermal HXR generated in the corona can be observed in space ( 42 ; 32 ; 8 ) . In the GHz range, non-thermal microwave emission during flares is typically dominated by accelerated electrons trapped by magnetic field lines ( 4 ) . While the brightest microwave emission concentrates near the looptop region ( 58 ; 8 ) , depending on frequency, they can appear in a wide range of coronal heights ( 9 ) . In addition to the footpoints of the reconnected post-flare loops, recent studies have reported HXR and microwave sources located at the footpoints of erupting field lines, which are associated with the filament eruption ( 10 ; 53 ; 11 ) . This scenario is also supported by a data-constrained magnetohydrodynamic (MHD) simulation ( 45 ) . However, the detailed processes of particle acceleration and transport associated with HXR and microwave emissions remain under debate. To address particle acceleration and transport, it is essential to consider the three-dimensional (3D) configuration of the magnetic fields because the electrons are guided by the magnetic field lines. While we can observe only magnetic structures projected onto the sky plane, observations from two or more different viewing angles can be used to reconstruct the 3D geometry using a technique known as stereoscopy. Using this technique, two spacecraft of the Solar TErrestrial RElations Observatory (STEREO; 28 ) reconstructed 3D coronal loops that are different from potential fields ( 2 ; 1 ) . Stereoscopic X-ray observations provide strong constraints on the 3D geometry of particle acceleration sites. For example, 48 combined Solar Orbiter/STIX ( 33 ) with Hinode/XRT ( 20 ) , extracting the 3D volume of the thermal X-ray source and indicating that the scaling law V=A^{3/2} , where A and V are the observed X-ray area and 3D derived volume, respectively, overestimates the true source volume. 49 paired STIX with ASO-S/HXI ( 59 ) , reproducing the 3D coronal loops associated with the coronal HXR source. Nonlinear force-free field (NLFFF) extrapolations are widely used to reconstruct 3D coronal magnetic fields ( 56 ; 25 ) . In the low- \beta corona ( \beta\sim 0.01 –0.1; 19 ), where \beta is the ratio of gas to magnetic pressure, the Lorentz force dominates, and the force-free assumption is well approximated. However, NLFFF provides only a static snapshot and cannot cover the eruptive evolution. Data-constrained MHD simulations overcome this limitation and have successfully reproduced eruptive dynamics and observations ( 57 ; 39 ; 43 ; 47 ) . This paper is a continuation of the work by 45 , which showed that the data-constrained MHD simulation reproduces the eruption and the associated reconnected field lines linked to the observed HXR footpoint sources, illuminating a detailed reconnection process in a realistic 3D magnetic environment. In this paper, we combined stereoscopic HXR and microwave observations with a 3D data-constrained MHD simulation to constrain the height of the non-thermal coronal source and test the consistency with the MHD simulation. Section II describes the observations and numerical setup, Section III presents the main results, Section IV provides the discussions, and Section V summarizes our conclusions. II Observations and MHD simulations II.1 Observation The X7.1 flare occurred in NOAA AR 13842 on 2024 October 1, starting at 21:58 UT and peaking at 22:20 UT in the GOES X-ray. 52 reported a super-hot component of the coronal source in the main peak phase of this flare (22:14:20–22:14:50 UT). Figures 1 (a) and (b) show the light curves from HXI and STIX. The STIX profile is built by summing eight pixels from the 24 coarsest imaging detectors, whereas the HXI profile is the sum of the two thick detectors (D92 and D93). Because the light travel times to HXI and STIX differ, the STIX time series is shifted by 352.9 s to align with HXI. The STIX attenuator moved at 22:04:42 UT (22:10:34 UT in Figure 1 ). To obtain an unattenuated 14–16 keV curve for Figure 1 (b), we adopt the STIX background detector pixels 2 & 5 ( 54 ) . Figure 1 (c) shows the Expanded Owens Valley Solar Array (EOVSA; 18 ) cross power spectrogram, with the white region indicating no data. Since 2017, EOVSA has provided microwave imaging spectroscopy spanning 1 to 18 GHz with 2 s time resolution, enabling spectral analysis at the flare site. After 22:10 UT, EOVSA data are unavailable due to phase calibration. We focus on the pre-impulsive and impulsive phases, defined by two intervals, 22:09:04-22:10:04 (Phase 0) and 22:10:30-22:10:50 (Phase 1), as marked in Figures 1 (a) and (b). Phase 0 with EOVSA observation is the main focus of this paper, whereas Phase 1 is discussed in detail in 45 . Figure 1 (d) shows the position of HXI, STIX, and the flare location. The HXI–STIX separation is \sim 95^{\circ} , providing two complementary vantage points on the HXR emission. Figure 1: (a) and (b) Temporal evolution of X-ray observed by HXI and STIX. For both HXI and STIX, the data are summed to a 4 s resolution. The red and blue curves represent the 14-16 keV and 32-50 keV ranges, respectively. The STIX light curves are shifted by 352.9 s to consider the different travel time of the light.

Read the complete text