Comment on “Fundamental limit of phonon Tesla valve for heat rectification from first principles”
Samuel Huberman, Aleksei Sokolov · 2026
Read Comment on “Fundamental limit of phonon Tesla valve for heat rectification from first principles” by Samuel Huberman, Aleksei Sokolov (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-28407.txt.
Introduction
Samuel Huberman and Aleksei Sokolov wrote this Comment to dispute a claim in a recent paper by Wu and Hu. The claim concerns a phonon Tesla valve, a channel meant to pass heat more easily one way than the other. Thermal rectification is a two-terminal property: swapping the hot and cold reservoirs must change the heat current.
Huberman and Sokolov show that, inside the fixed linearized transport equation the original work used, any passive two-terminal setup of this kind gives equal forward and reverse resistance magnitudes. This holds provided the scattering preserves a uniform temperature shift and the problem is well posed. A direction-dependent response can still appear under a prescribed source-and-sink protocol. Such a response, they argue, should not be called two-terminal rectification.
Catalog record
| CREATOR | Samuel Huberman, Aleksei Sokolov |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 14 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2606.28407
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Comment on “Fundamental limit of phonon Tesla valve for heat rectification from first principles” Samuel Huberman, Aleksei Sokolov Abstract Thermal rectification is a two-terminal property: the same device must carry different heat-current magnitudes when two reservoir temperatures are interchanged. In this Comment on Ref. WuHu2026 , we ask whether the reported ratio γ = R f / R b \gamma=R_{\mathrm{f}}/R_{\mathrm{b}} can represent such a two-terminal rectification ratio within the fixed-background linearized phonon Boltzmann transport equation (BTE) used in that work. We show that, for a passive two-terminal reservoir problem, any fixed linearized BTE whose scattering operator preserves a uniform equilibrium temperature shift, and whose boundary-value problem is well posed, gives equal forward and reverse resistance magnitudes. A direction-dependent response can still occur under a prescribed gradient-weighted source–sink protocol, but such a response should be distinguished from two-terminal thermal rectification. Thermal rectification is commonly defined by comparing the same two-terminal device under interchanged reservoir temperatures: the heat-current magnitudes associated with Q(T_{1},T_{2}) and Q(T_{2},T_{1}) must differ for T_{1}\neq T_{2} Budaev2017 . This distinction is important in nonlocal phonon transport, where different source and sink prescriptions can produce different internal temperature fields even within a linear theory. In this Comment, we distinguish these notions for the phonon Tesla valve of Ref. WuHu2026 . We do not question that asymmetric geometry can yield direction-dependent nonequilibrium phonon trajectories under a prescribed injection protocol. Rather, we show that interchanged thermal reservoirs give equal forward and reverse resistances in the fixed-background linearized BTE, whereas a gradient-driven source–sink protocol need not obey the same symmetry. Ref. WuHu2026 writes the linearized deviational-energy BTE as \frac{\partial\delta f_{\lambda}}{\partial t}+\mathbf{v}_{\lambda}\cdot\nabla\delta f_{\lambda}=\sum_{\lambda^{\prime}}A_{\lambda,\lambda^{\prime}}\delta f_{\lambda^{\prime}}, (1) where \delta f_{\lambda}=\hbar\omega_{\lambda}\delta n_{\lambda} . The modal specific heat is defined as C_{\lambda}\equiv\hbar\omega_{\lambda}\frac{\partial n^{0}_{\lambda}}{\partial T} (2) up to a normalizing factor consisting of the unit cell volume and number of \mathbf{q} points in the discretized Brillouin zone. One can then define a small local-equilibrium temperature shift \Theta which is much less than the global background temperature T_{0} such that \delta f^{\rm eq}_{\lambda}=C_{\lambda}\Theta. (3) Because a spatially uniform shift of the Bose-Einstein distribution is an equilibrium state, the collision operator must satisfy \sum_{\lambda^{\prime}}A_{\lambda,\lambda^{\prime}}C_{\lambda^{\prime}}=0, (4) and the heat flux associated with the uniform equilibrium perturbation vanishes: \mathbf{Q}^{\rm eq}=\sum_{\lambda}\mathbf{v}_{\lambda}C_{\lambda}\Theta=0, (5) by time-reversal symmetry of phonon modes. Equivalently, for every mode \lambda=(\mathbf{q},s) there is a time-reversed partner \bar{\lambda}=(-\mathbf{q},s) with C_{\bar{\lambda}}=C_{\lambda} and \mathbf{v}_{\bar{\lambda}}=-\mathbf{v}_{\lambda} . It is useful to introduce the linear transport operator associated with Eq. (1): \mathcal{L}[X]_{\lambda}\equiv\frac{\partial X_{\lambda}}{\partial t}+\mathbf{v}_{\lambda}\cdot\nabla X_{\lambda}-\sum_{\lambda^{\prime}}A_{\lambda,\lambda^{\prime}}X_{\lambda^{\prime}}. (6) Equation (1) is therefore the statement that the relevant deviational-energy distribution is in the null space of this operator, \mathcal{L}[\delta f]=0 . The operator \mathcal{L} is linear in its argument as long as the scattering matrix and velocities are evaluated about the same fixed background temperature. For solutions X_{\lambda} , the terminal heat current is the linear functional Q_{i}[X]=\int_{\Gamma_{i}}\sum_{\lambda}(\mathbf{v}_{\lambda}\cdot\mathbf{n}_{i})X_{\lambda}(\mathbf{r})\,dS, (7) where \Gamma_{i} denote the cross-sectional boundary surface at terminal i , where the device is connected to reservoir i , and let \mathbf{n}_{i}(\mathbf{r}) be the unit normal on \Gamma_{i} pointing outward from the device into the reservoir. Now consider the valve geometry of Ref. WuHu2026 with terminals 1 and 2 . F_{\lambda}(\mathbf{r}) denotes the forward-bias solution of Eq. (1), F_{\lambda}(\mathbf{r})=\delta f^{\rm fwd}_{\lambda}(\mathbf{r}) , and thus satisfies \mathcal{L}[F]=0 by construction. Similarly, \widetilde{F}_{\lambda} denotes the reverse-bias solution. Let F_{\lambda}(\mathbf{r}) be the steady solution when terminal 1 is held at T_{1}=T_{0}+\Theta and terminal 2 is held at T_{2}=T_{0} , with all other boundaries passive and energy-conserving. The boundary condition at a thermal reservoir is linear in the imposed temperature perturbation: phonons from a reservoir at T_{0}+\Theta_{i} have the local-equilibrium deviational distribution C_{\lambda}\Theta_{i} . Therefore F satisfies the reservoir boundary conditions F|_{1}=C_{\lambda}\Theta,\qquad F|_{2}=0. (8) The candidate reversed solution is \widetilde{F}_{\lambda}(\mathbf{r})=U_{\lambda}-F_{\lambda}(\mathbf{r}). (9) where U_{\lambda}=C_{\lambda}\Theta is the spatially uniform solution. Since the forward reservoir values are C_{\lambda}\Theta and 0 , an affine transformation F\mapsto U-F is needed to swap the reservoirs. If the forward reservoirs are F|_{1}=C_{\lambda}\Theta and F|_{2}=0 and the backward reservoirs are \widetilde{F}|_{1}=-C_{\lambda}\Theta and \widetilde{F}|_{2}=0 , the transformation becomes \widetilde{F}=-F . Because \mathcal{L} is linear, the candidate also satisfies the same interior equation: \mathcal{L}[\widetilde{F}]=\mathcal{L}[U-F]=\mathcal{L}[U]-\mathcal{L}[F]=0. (10) It remains to check the reversed reservoir boundaries. The uniform solution has \displaystyle\widetilde{F}|_{1} \displaystyle=U|_{1}-F|_{1}=C_{\lambda}\Theta-C_{\lambda}\Theta=0, (11) \displaystyle\widetilde{F}|_{2} \displaystyle=U|_{2}-F|_{2}=C_{\lambda}\Theta-0=C_{\lambda}\Theta. (12) These are precisely the boundary conditions for the reversed thermal bias. Assuming the standard uniqueness of the steady linear BTE with these reservoir and passive-wall boundary conditions, the candidate in Eq. ( 9 ) is therefore the reverse-bias solution. Since the uniform equilibrium solution carries no heat current, inserting Eq. ( 9 ) into Eq. ( 7 ) gives Q_{i}[\widetilde{F}]=Q_{i}[U-F]=-Q_{i}[F], (13) and therefore R_{\mathrm{f}}/R_{\mathrm{b}}=1 . This conclusion is specific to a two-terminal device. If a third terminal is joined to the geometry and acts a fixed bath, the affine transformation no longer maps the forward problem to the reversed problem. Let F^{(i)} denote the solution with terminal i at T_{0}+\Theta and the other two terminals at T_{0} . The uniform solution satisfies U=F^{(1)}+F^{(2)}+F^{(3)} . Hence U-F^{(1)}=F^{(2)}+F^{(3)} , which has terminals 2 and 3 both at T_{0}+\Theta , and is not the reverse problem F^{(2)} with terminal 3 fixed at T_{0} . Passive non-reservoir boundaries, such as diffusive or specular side walls, also do not evade the argument. Specular reflection is a linear map of the incoming distribution. A diffuse adiabatic wall may be represented by a linear energy-conserving map that redistributes the outgoing deviational energy into the mode-dependent C_{\lambda} distribution while enforcing zero net normal energy flux. Such a wall leaves the uniform equilibrium perturbation U_{\lambda}=C_{\lambda}\Theta invariant. Hence, if both F and U satisfy the same passive wall rule, then U-F satisfies it as well. Ref. WuHu2026 uses inlet conditions that are different from a standard isothermal diffuse reservoir. In the Monte Carlo simulation, sample particles at the inlet are initialized with a probability proportional to |C_{\lambda}\mathbf{v}_{\lambda}\cdot\nabla T| , while the outlet is fixed at the background temperature and removes particles upon arrival. Only if the imposed gradient is normal to the inlet boundary does this sampling have the same angular flux weight as emission from a diffuse isothermal reservoir, and even then its amplitude is set by the imposed gradient or heating power rather than by an isothermal reservoir population C_{\lambda}\Theta_{i} . In Ref. WuHu2026 , the direction of the imposed \nabla T relative to the local inlet normal is not specified in sufficient detail to identify this sampling rule with a standard isothermal reservoir condition. Regarding the analogy to classical fluids discussed in Ref. WuHu2026 , the relevant distinction is the role of inertia. In the low-Reynolds-number limit, the Navier–Stokes equations reduce to the linear Stokes equations, for which reversing the pressure difference reverses the velocity field and gives the same hydraulic resistance. Directional resistance in a classical Tesla valve arises only when inertial nonlinearities become important at finite Reynolds number Nguyen2021AJP . In this respect, the fixed-background linearized phonon BTE is more closely analogous to Stokes flow than to inertial fluid flow. In this regime, the LBTE can be well approximated by the Viscous Heat Equations (VHE) Simoncelli2020 ; Dragasevic2026 \displaystyle\sum_{i,j=1}^{3}W_{0j}^{i}\sqrt{\bar{T}A^{j}C}\frac{\partial u^{j}(\bm{r},t)}{\partial r^{i}}-\sum_{i,j=1}^{3}\kappa^{ij}\frac{\partial^{2}T(\bm{r},t)}{\partial r^{i}\partial r^{j}} \displaystyle=0, (14) \displaystyle\sqrt{\frac{CA^{i}}{T_{0}}}\sum_{j=1}^{3}W_{i0}^{j}\frac{\partial T(\bm{r},t)}{\partial r^{j}}-\sum_{j,k,l=1}^{3}\mu^{ijkl}\frac{\partial^{2}u^{k}(\bm{r},t)}{\partial r^{j}\partial r^{l}} \displaystyle=-\sum_{j=1}^{3}\sqrt{A^{i}A^{j}}\,D_{U}^{ij}u^{j}(\bm{r},t). (15) where C is the specific heat, W_{0j}^{i} is a velocity tensor, T_{0} is the reference (equilibrium)