Gravitational-wave response functions for space-borne detectors based on multiple geometric time-delay interferometry links Journal: Eur. Phys. J. C

Rui Luo addr1, Pan-Pan Wang e1,addr2, Lin-Lin Yang addr1, Xin-Lei Zhao addr1, Cheng-Gang Shao addr3 · 2026

Read Gravitational-wave response functions for space-borne detectors based on multiple geometric time-delay interferometry links Journal: Eur. Phys. J. C by Rui Luo addr1, Pan-Pan Wang e1,addr2, Lin-Lin Yang addr1, Xin-Lei Zhao addr1, Cheng-Gang Shao addr3 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-28173.txt.

Introduction

Rui Luo, Pan-Pan Wang, Lin-Lin Yang, Xin-Lei Zhao, and Cheng-Gang Shao work on space-based detectors that will listen for gravitational waves, ripples in spacetime, from fleets of spacecraft exchanging laser beams. Instrument noise there dwarfs the signal, so a technique called time-delay interferometry recombines delayed measurements to cancel the worst noise.

Luo and colleagues offer a general recipe that builds each detector's response function, its expected output for a given wave, directly from the geometry of its laser links. They rewrite forty-five second-generation interferometry combinations in this language. For several combinations the new expressions are much simpler and physically clearer, and the recipe cuts the computing effort needed to process data for future missions.

Catalog record

CREATORRui Luo addr1, Pan-Pan Wang e1,addr2, Lin-Lin Yang addr1, Xin-Lei Zhao addr1, Cheng-Gang Shao addr3
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE88 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.28173

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Gravitational-wave response functions for space-borne detectors based on multiple geometric time-delay interferometry links Journal: Eur. Phys. J. C Rui Luo addr1, Pan-Pan Wang e1,addr2, Lin-Lin Yang addr1, Xin-Lei Zhao addr1, Cheng-Gang Shao addr3 Abstract The primary challenge for space-borne gravitational wave (GW) detectors lies in extracting the weak GW signal from instrumental noise that exceeds the signal level by many orders of magnitude. Time-delay interferometry (TDI) addresses this by suppressing the dominant laser phase noise through recombination of time-delayed measurement data. The detector’s response to a GW signal is represented in the frequency domain by a response function. Currently, the GW signal response is first expressed in terms of the Doppler frequency shift in a single detection arm, and this formulation is then incorporated into specific TDI combinations to derive the corresponding response function. This paper introduces a generalized formulation for TDI combinations based on multiple geometric links. By extending the representation of the laser Doppler frequency shift to include various geometric configurations, such as round-trip and non-round-trip links, we reformulate 45 second-generation TDI combinations. For several of these, the new formulation significantly streamlines their mathematical expressions and enhances physical clarity. Our results demonstrate that the proposed link-mapping rules not only enable efficient construction of response functions for these TDI combinations but also reduce computational complexity. This approach provides a reliable theoretical and algorithmic foundation for data processing in future space-borne GW missions. 1 1 1 e-mail: [email protected] 1 Introduction Gravitational waves (GWs) are one of the key predictions of general relativity. In 2015, the ground-based GW detector LIGO first detected GW signals, providing a new observational method for astronomical research LIGO-2016-01 ; LIGO-2016-02 . To detect GWs in the frequency band of 0.1 mHz to 1 Hz, space-borne GW detectors such as LISA LISA-2024-redbook , Taiji taiji-2017-01 , and TianQin TianQin-2016-01 have been proposed. For LISA and Taiji, spacecraft follow heliocentric orbits with about 1-year periods. LISA maintains an arm length of 2.5 million kilometers, while Taiji’s arm lengths are 3 million kilometers. TianQin utilizes geocentric orbits with about 3.5-day periods and arm lengths of 170,000 kilometers. Its detector plane normal vector points toward the source RX J0806.3+1527. Space-borne GW detectors use laser beams as carriers of GW signals, with free-falling test masses (TMs) serving as endpoints for laser transmission and reception. GWs are periodic perturbations of spacetime curvature. Photons travel along geodesics in spacetime. The relative distance variations between TMs are measured via interferometric detection of laser phase changes. Among noise sources, acceleration noise on the TMs and optical metrology system (OMS) noise constitute the detector’s noise floor, determining the ultimate sensitivity limit. A space-borne GW detector consists of three spacecraft forming six detection arms. In a single arm, laser phase noise is approximately seven orders of magnitude higher than the target sensitivity, but it can be suppressed using time-delay interferometry (TDI). TDI constructs a virtual equal-arm interferometer by time-delaying and recombining the heterodyne beatnote phases from different arms, thereby partially canceling laser phase noise tdi-nullchaneel-1999-Armstrong ; tdi-2000-Estabrook ; clock-tdi-2002-tinto-PRD ; tdi-2021-tinto-LRR . The effectiveness of TDI has been validated through ground-based experiments experimental-tdi-2010-deVine-PRL ; experimental-tdi-2020-Vinckier-PRD and simulation-based verification simulation-LISACode-2008-Petiteau ; laser-tdi-transerfun-2019-PRD-Bayle . Methods for searching TDI combinations have also been developed, including geometric geometric-tdi-2005-Michele-PRD ; geometric-tdi-2020-Muratore-CQG ; geometric-tdi-2022-Wang-PRD ; geometric-tdi-2023-Wang-PRD and algebraic approaches Algebraic-tdi-2002-Dhurandhar ; Algebraic-tdi-2004-Nayak ; algebraic-TDI-2010-Dhurandhar-CQG ; algebraic-tdi-2022-Wu ; algebraic-tdi-2022-Qian ; algebraic-TDI-2023-Wu-hust-PRD . It is important to note that besides laser phase noise, there are other noise sources. For example, clock jitter noise is about three orders of magnitude higher than the detection target clock-2018-Tinto-prd , while tilt-to-length (TTL) noise TTL-2022-Houba ; TTL-2023-Houba-CQG ; TTL-2023-Armano-PRD ; TTL-2024-Fang-PRD and plasma noise plasma-lisa-2020-Smetana ; plasma-tianqin-2020-Su ; plasma-lisa-2021-Oliver ; plasma-tianqin-2021-lu ; plasma-tianqin-2021-Su ; plasma-tdi-2024-Zhao ; tianqin-plasma-tdi-2024-Liu are close to the target level. Corresponding noise suppression techniques have been developed accordingly tdi-Clock-2021-transferfun-Olaf-PRD ; Clock-2021-Wang-prd ; Clock-2023-Yang-RP ; TTL-2022-Paczkowski-PRD ; TTL-2024-Wanner-PRD ; TTL-2025-Wang-PRD ; TTL-2025-Chen-PRD ; TTL-2025-Wegener-PRD ; TTL-2025-Chen-CQG ; plasma-tiaqnin-2022-Jing . In this work, we focus only on the laser phase noise and TDI algorithm. The principle of detecting GWs can be understood as measuring the Doppler shift in laser frequency. Detector performance is typically characterized by sensitivity function, defined as the ratio of the GW signal response to the noise floor. In the frequency domain, the response to a GW is represented as the product of the detector’s response function and the GW amplitude. The response function incorporates the detector configuration, the selected TDI combination, and the sky location of the source relative to the detector. In 1975, Estabrook and Wahlquist employed Killing vectors to derive the GW response by calculating the Doppler shift in electromagnetic tracking signals as a GW passes through the detector senstivity-1975-Estabrook-GRG . In 2004, Rubbo et al. further utilized Killing vectors to calculate the response function for LISA senstivity-2004-Rubbo-PRD . In addition, Dhurandhar and Cornish calculated the response function of a GW signal in a single laser link of LISA by integrating along the photon’s trajectory Algebraic-tdi-2002-Dhurandhar ; senstivity-2003-Cornish-PRD . Depending on the nature of the GW source, different types of response functions can be derived. For different GW polarizations, semi-analytical formulas for the response function containing definite integrals can be obtained senstivity-2000-Larson-PRD ; senstivity-2002-Larson-PRD ; senstivity-2019-Liang-PRD ; senstivity-2019-Zhang-PRD . By means of numerical integration, the averaged response functions for all six possible polarizations in different TDI combinations have been derived senstivity-2012-Arkadiusz-PRD ; senstivity-2010-Tinto-PRD . Reference tdi-nullchaneel-1999-Armstrong ; senstivity-2001-Armstrong ; Algebraic-tdi-2002-Dhurandhar provided the response function expressions for first-generation TDI combinations. In our previous work, we derived fully analytical formulas for the averaged response function under arbitrary TDI combinations and extended them to all six possible polarization modes senstivity-2019-Lu-PRD ; senstivity-2020-Zhang-PRD ; senstivity-2021-Wang-01 ; senstivity-2021-Wang-02 . The response of a space-borne GW detector to GW signals depends on the chosen TDI combination. The core idea of TDI is to combine the phase measurements from each detection arm, and it allows different elementary building blocks to be selected for the combination. References senstivity-2020-Zhang-PRD ; senstivity-2021-Zhang-PRD used the round-trip link as the fundamental element for constructing the response function, while references senstivity-2019-Zhang-PRD ; senstivity-2019-Liang-PRD ; senstivity-2019-Lu-PRD ; senstivity-2021-Wang-01 ; senstivity-2021-Wang-02 employed the single-link Doppler measurement as the basic element. The single-link approach offers greater flexibility in constructing TDI combinations, whereas multi-link methods provide simpler expressions for specific combinations such as the Michelson-type TDI. Therefore, it is necessary to calculate the Doppler frequency shift forms for different laser link combinations. This paper focuses on the Doppler frequency shift representations under different link configurations and their mapping relationships with various TDI combinations. We systematically derive the response function of the GW signal for a single laser link and, in conjunction with the detector configuration, present the response functions for dual geometric links, including 6 round-trip and 6 non-round-trip laser links. Furthermore, we establish a mapping between dual laser links and single laser links, and reformulate the expressions for 45 fundamental TDI combinations. This reformulation will facilitate future calculations of TDI response functions using dual laser links as the basic building blocks. The remainder of the paper is organized as follows. In Section 2 , we introduce the configuration of space-based GW detectors, the TDI algorithm, and laser phase locking. In Section 3 , we systematically derive the response

Read the complete text