Effects of thermochemical modelling on a hypersonic shock-wave/turbulent boundary-layer interaction

Marco Fratini \aff 1, Pedro Stefanin Volpiani \aff 2, Matteo Bernardini \aff 1 · 2026

Read Effects of thermochemical modelling on a hypersonic shock-wave/turbulent boundary-layer interaction by Marco Fratini \aff 1, Pedro Stefanin Volpiani \aff 2, Matteo Bernardini \aff 1 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-28018.txt.

Introduction

Hypersonic flight heats air so strongly that chemistry starts to matter, and Marco Fratini, Pedro Stefanin Volpiani, and Matteo Bernardini quantify it in 2026 with direct simulations. An oblique shock impinges on a turbulent, very hot boundary layer. The edge Mach number is six point four. Three simulations share geometry and conditions, differing only in the chemistry model, from finite-rate chemistry down to a calorically perfect gas.

The reactive case behaves differently throughout. The shock-induced temperature rise boosts chemical activity, and breakdown products peak downstream. Composition lags the thermal forcing, so the two responses fall out of sync. Turbulent Damköhler numbers reach order unity. Finite-rate chemistry gives a smaller separation bubble, lower wall heat flux, and a less inclined reflected shock. The two perfect-gas models agree closely. The dominant distinction is therefore frozen versus reacting flow, and simplified models give safe heat-flux estimates.

Catalog record

CREATORMarco Fratini \aff 1, Pedro Stefanin Volpiani \aff 2, Matteo Bernardini \aff 1
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE66 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.28018

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Effects of thermochemical modelling on a hypersonic shock-wave/turbulent boundary-layer interaction Marco Fratini \aff 1, Pedro Stefanin Volpiani \aff 2, Matteo Bernardini \aff 1 Abstract Thermochemical non-equilibrium can alter the structure, loads, and time scales of hypersonic shock-wave/turbulent boundary-layer interactions, yet its role in fully turbulent configurations remains largely unquantified. The present work addresses this issue by performing three direct numerical simulations of an oblique shock impinging on a turbulent high-enthalpy boundary layer at edge Mach number M e = 6.4 M_{e}=6.4 and stagnation enthalpy H e = 16.9 H_{e}=16.9 MJ/kg. The simulations share identical geometry and freestream conditions, but employ a hierarchy of progressively simplified thermochemical descriptions: a finite-rate reactive case, a single-species thermally perfect gas model, and a single-species calorically perfect model. The reactive simulation shows that the shock-induced temperature rise substantially enhances chemical activity relative to the incoming boundary layer, with peak concentrations of dissociation products attained downstream of the interaction. Thus, the thermal and chemical responses are not synchronised: the composition lags the rapid thermal forcing imposed by the shock system, and turbulent Damköhler numbers reach values of order unity within the recirculation region, indicating non-negligible turbulence–chemistry interaction. The comparison among the three models shows that thermally and calorically perfect descriptions yield similar predictions, whereas finite-rate chemistry produces systematic differences: a smaller separation bubble, lower post-interaction wall heat flux, lower mean and fluctuating temperatures, and a less inclined reflected shock. In the present regime, the dominant modelling distinction is therefore between frozen and chemically reacting descriptions, with caloric-model effects playing only a secondary role. We conclude that simplified fluid models provide conservative estimates of wall heat flux and separation extent, making them well suited for hypersonic thermal protection system design. \lefttitle M. Fratini, P.S. Volpiani, and M. Bernardini \righttitle Journal of Fluid Mechanics \corresau Matteo Bernardini, 1 Introduction Shock-wave/boundary-layer interaction (SBLI) is a longstanding cornerstone problem of high-speed aerodynamics because it strongly affects wall-pressure loads, skin friction, wall-heat flux, boundary-layer separation, and flow unsteadiness in a wide range of aerospace applications, including control surfaces, engine intakes, over-expanded nozzles, and re-entry vehicles ( Dolling 2001 ; Gaitonde 2015 ) . Despite decades of research, SBLI remains difficult to predict accurately because the shock system, the incoming boundary layer, and the separated flow region interact over a broad range of spatial and temporal scales. In particular, one of the most debated aspects of turbulent SBLI is the low-frequency unsteadiness of the interaction, often observed as a broadband streamwise motion of the reflected shock and of the associated separated region. For hypersonic flows, the problem becomes even richer. The stronger kinetic-to-internal energy conversion produced by viscous dissipation may activate additional physical processes, including vibrational excitation, molecular dissociation, and, at more extreme conditions, ionisation. As emphasised by Candler 2019 , hypersonic flows are governed by the competition among multiple processes whose characteristic times may become comparable with the fluid dynamic timescale. As a result, the gas state may depart from local thermodynamic equilibrium, and the resulting rate effects can alter the overall dynamics. Although these issues are widely recognised in hypersonic aero-thermodynamics, the large majority of studies of turbulent SBLI are still carried out under calorically perfect gas assumption, or at most with thermally perfect models. Even in the absence of thermochemical non-equilibrium, SBLI has already been shown to be highly sensitive to the wall thermal condition. Numerical studies in both supersonic and hypersonic cryogenic regimes have demonstrated that wall cooling can significantly affect the interaction length, the onset and extent of separation, wall heat transfer, and the pressure fluctuation levels ( Volpiani et al. 2018 ; Volpiani et al. 2020 ; Zhang et al. 2024 ) . In particular, direct numerical simulations (DNS) of low-enthalpy hypersonic turbulent SBLI by Volpiani et al. 2020 showed that wall cooling tends to mitigate flow separation while modifying wall-pressure fluctuations and thermal loads, and also highlighted that a major part of this sensitivity is mediated by changes in the state of the incoming boundary layer. This observation is especially relevant in the hypersonic regime, where strong wall cooling is often unavoidable in practice and where the incoming boundary layer may itself be profoundly altered by thermodynamic effects. Moreover, recent DNS of hypersonic turbulent compression-corner flow by Di Renzo et al. 2024 showed that replacing a calorically perfect-gas model with a calorically imperfect description including vibrational excitation does not qualitatively alter the flow organisation, but can still induce non-negligible quantitative variations in skin friction, wall heat flux, and wall-pressure fluctuations. At the same time, a growing body of work has shown that thermochemical non-equilibrium can substantially modify hypersonic turbulent boundary layers even in the absence of shock impingement. Following early studies on temporally evolving, high-temperature and chemically reactive boundary layers ( Martín & Candler 2001 ; Duan & Martín 2009 ; Duan & Martín 2011 ) , more recent direct numerical simulations have documented the role of vibrational non-equilibrium and finite-rate chemistry in both transitional and turbulent high-enthalpy, spatially evolving, boundary layers ( Di Renzo & Urzay 2021 ; Passiatore et al. 2022 ; Williams et al. 2025 ; Fratini & Bernardini 2026 ) . Taken together, these works indicate that, under sufficiently energetic conditions, high-enthalpy effects are not a secondary correction, but can exert a first-order influence on the prediction of both mechanical and thermal loads. This also implies that the use of simplified frozen models in hypersonic wall-bounded flows must be assessed carefully, rather than assumed a priori to be adequate. By contrast, the literature on hypersonic high-enthalpy SBLI remains comparatively sparse ( Raje et al. 2025 ) . The interaction between a turbulent boundary layer and an impinging shock sharply reduces the viscous length scale downstream of the interaction, thereby making the resolution requirements significantly more severe than in canonical zero-pressure-gradient boundary layers. As a result, direct numerical simulations of hypersonic high-enthalpy flows have so far focused mainly on boundary-layer configurations, whereas SBLI cases remain much less explored. A first step in this direction was taken by Volpiani 2021 , who presented an early three-dimensional turbulent SBLI including chemical non-equilibrium. That numerical simulation, however, was intentionally carried out at low Reynolds number ( Re_{\tau}\approx 200 ) in order to keep the problem computationally tractable, and therefore its main contribution lies in demonstrating the feasibility of the approach rather than in providing a fully developed turbulent reference case. More recently, Passiatore et al. 2023 investigated the impingement of an oblique shock on a transitional high-enthalpy boundary layer out of thermochemical equilibrium. Their results showed that thermal non-equilibrium is enhanced and sustained by the shock-induced transition, whereas chemical activity remains comparatively weak. These studies clearly demonstrate both the feasibility and the relevance of high-fidelity simulations of high-enthalpy SBLI, but also highlight how limited the currently available database still is. To the best of the authors’ knowledge, a direct numerical simulation study of a chemically reacting hypersonic SBLI under fully turbulent high-Reynolds-number conditions is still missing. To address this gap, the multispecies reactive Navier–Stokes equations were solved using a high-fidelity DNS approach on meshes exceeding 10^{10} grid points, leveraging GPU-accelerated computing to achieve statistically converged results over extended simulation times. The present work addresses an additional question concerning the role of fluid modelling in turbulent

Read the complete text