Lattice patch structure for fixed-frequency transmon quantum computer with high-fidelity CNOT gates Preprint: APS/123-QED

Chanpyo Kim, Jeongsoo Kang, Younghun Kwon · 2026

Read Lattice patch structure for fixed-frequency transmon quantum computer with high-fidelity CNOT gates Preprint: APS/123-QED by Chanpyo Kim, Jeongsoo Kang, Younghun Kwon (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-27017.txt.

Introduction

Chanpyo Kim, Jeongsoo Kang, and Younghun Kwon propose a lattice-patch design for superconducting quantum computers. Transmon qubits are a leading hardware platform. Standard layouts link pairs of qubits through one coupler each. Scaling brings frequency crowding, where neighbours clash, and awkward mapping onto error-correction grids. Their patch couples four fixed-frequency qubits to one shared coupler.

The patch mirrors one cell of the surface code, the leading error-correction scheme, cutting compilation overhead. Nothing in the design needs tuning after fabrication, so external flux noise cannot disturb it. Simulations of the multi-level physics showed logic gate fidelities above ninety-eight percent in all six link directions. A parasitic phase build-up during driving was identified as the main imperfection to tame.

Catalog record

CREATORChanpyo Kim, Jeongsoo Kang, Younghun Kwon
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE46 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.27017

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Lattice patch structure for fixed-frequency transmon quantum computer with high-fidelity CNOT gates Preprint: APS/123-QED Chanpyo Kim, Jeongsoo Kang, Younghun Kwon Abstract Superconducting transmon processors represent a leading platform for large-scale quantum computing due to their high gate fidelities and scalability. However, conventional qubit-coupler-qubit (QCQ) architectures face critical physical and structural bottlenecks, notably frequency crowding [spectator qubit collisions] during system scaling and inefficient mapping onto the standard surface code.To overcome these limitations, we propose a novel lattice-patch architecture that couples four fixed-frequency transmons to a single fixed-frequency coupler.This design enhances qubit connectivity and maps directly onto the surface-code lattice unit [plaquette], thereby minimizing the compilation overhead associated with logical qubit implementation. Furthermore, utilizing an entirely fixed-frequency design intrinsically eliminates susceptibility to external flux noise, ensuring robust operational stability.Multi-level numerical simulations demonstrate CNOT gate fidelities exceeding 0.98 across all six connectivity directions within the patch. Nevertheless, the complex interaction network of the four-qubit architecture induces unintended residual phase accumulation during cross-resonance driving. This parasitic effect necessitates precise calibration, achievable via virtual R z R_{z} gates [software phase updates]. Ultimately, our results establish the lattice-patch architecture as an efficient, robust building block for future fault-tolerant quantum computers. I Introduction test test A variety of quantum computing algorithms, including Shor’s algorithm and Grover’s algorithm, have demonstrated both the necessity and the feasibility of implementing quantum computers. In particular, the potential of quantum computing to surpass the limits of classical computation has driven its rapid adoption across diverse industrial and research fields Shor 1999 ; Grover 1996 ; Bae and Kwon 2002 ; Park et al. 2007 ; Preskill 2018 . Among the various physical platforms for qubit implementation, superconducting systems are prominent candidates due to their rapid gate operation times and robust scalability Namkung and Kwon 2020 ; Choe et al. 2025 ; Arute et al. 2019 ; Kim et al. 2023a ; Blais et al. 2021 ; Krantz et al. 2019 . Transitioning from the Noisy Intermediate-Scale Quantum (NISQ) era to practical quantum computation necessitates large-scale Quantum Error Correction (QEC) Kjaergaard et al. 2020 . Surface codes, which implement logical qubits on a lattice structure, are central to QEC and are the subject of intense research within superconducting hardware development Fowler et al. 2012 ; Wang et al. 2011 ; Google Quantum AI et al. 2023 ; Google Quantum AI and Collaborators et al. 2025 ; Vezvaee et al. 2025 ; Kim et al. 2023b ; Kim et al. 2025a ; Kim et al. 2025b . To date, superconducting architectures have primarily diverged into grid-based layouts (Google) and heavy-hexagon structures (IBM). While Google’s grid architecture—incorporating individual couplers between qubit pairs—allows for direct surface-code mapping, the escalating number of couplers in larger systems triggers performance degradation through unwanted interactions and crosstalk Ding et al. 2020 . Conversely, IBM’s heavy-hexagon structure suppresses these interactions by reducing connectivity Chamberland et al. 2020 , yet it incurs mapping inefficiencies, such as the requirement for additional SWAP gate overhead. Furthermore, many current platforms utilize tunable couplers for gate control Yan et al. 2018 ; Sete et al. 2021 , which require dedicated flux-bias lines and expose the system to decoherence from flux noise Paladino et al. 2014 . To address these structural bottlenecks, research has shifted toward alternative hardware architectures. Recent proposals have explored coupling three fixed-frequency qubits to a single fixed-frequency coupler Kang et al. 2025 , demonstrating high gate fidelities via microwave-based control Chow et al. 2011 ; Shirai et al. 2023 ; Jiang et al. 2025 . However, these configurations still face structural constraints when aligning with surface-code lattice units, necessitating complex mapping procedures for large-scale expansion. In this work, we propose a ”lattice-patch” architecture that integrates four fixed-frequency transmon qubits with a single fixed-frequency coupler. This design achieves topological alignment with the surface code, overcoming the mapping limitations of previous structures. By employing an entirely fixed-frequency configuration, we minimize sensitivity to flux noise and maximize physical stability. Through numerical simulations, we demonstrate CNOT gates across six distinct directions within the patch, establishing this architecture as an efficient and stable building block for next-generation fault-tolerant quantum computers. II System Configuration The proposed architecture integrates four fixed-frequency transmon qubits with a single fixed-frequency coupler, a configuration we define as the Lattice-Transmon system. II.1 Comparison of Hardware Architecture and Connectivity Figure 1 illustrates the structural advantages of the Lattice-Transmon system relative to representative superconducting quantum computing architectures. (a) (b) (c) Figure 1: Comparison of prominent superconducting quantum computing architectures. ( a ) Google’s grid architecture utilizes individual couplers between adjacent qubits, enabling direct surface-code mapping; however, the high coupler density in scaled systems leads to performance degradation from parasitic interactions and crosstalk. ( b ) IBM’s heavy-hexagon structure suppresses these interactions by reducing qubit connectivity, yet it lacks direct surface-code mapping, resulting in reduced mapping efficiency and significant SWAP gate overhead. ( c ) The proposed lattice-patch architecture couples four fixed-frequency transmons to a single fixed-frequency coupler, facilitating direct topological correspondence with surface-code lattice units [plaquettes] while providing high connectivity without additional hardware overhead. Conventional designs, such as Google’s grid architecture (Fig. 1 a) and IBM’s heavy-hexagon layout (Fig. 1 b), deploy individual couplers between every adjacent qubit pair to mediate direct interactions Arute et al. 2019 ; Kim et al. 2023a . As systems scale, this approach leads to a prohibitive increase in the number of couplers and control lines. Moreover, during CNOT operations on a target qubit pair, these architectures are highly susceptible to parasitic interactions from the dense surrounding network of couplers and qubits Ding et al. 2020 . In contrast, our proposed architecture (Fig. 1 c) utilizes a patch-based geometry where four qubits are locally coupled through a single central mediator. By minimizing the number of physical components involved in gate operations, this design significantly reduces hardware complexity and mitigates operational overhead Wu et al. 2024 . II.2 Physical Model and Energy Level Design The detailed architecture and circuit model of the proposed system are illustrated in Fig. 2 . The central fixed-frequency coupler is designed as an LC resonator, to which four transmon qubits are capacitively coupled with strengths G_{i} (Fig. 2 a, b). (a) (b) (c) Figure 2: Detailed architecture and circuit model of the lattice-patch structure. ( a ) Schematic of the 1-coupler-4-qubit system. The Lattice-Transmon architecture consists of four fixed-frequency transmon qubits ( Q_{0} - Q_{3} ) coupled to a single fixed-frequency central mediator (C). Each qubit is locally connected via coupling strengths G_{i} , a configuration designed to minimize gate operation overhead. ( b ) Lumped-element circuit model. The central coupler is implemented as an LC resonator with resonance frequency \omega_{C} . Each transmon is defined by its Josephson energy ( E_{J,i} ) and charging energy ( E_{C,i} ). External microwave drive voltages ( n_{g,i} ) facilitate qubit control, while capacitive coupling mediates interactions between the qubits and the central resonator. ( c ) Scalability of the lattice patch. The periodic tiling of the patch unit drastically reduces the total coupler count compared to standard architectures and enables direct mapping onto the surface-code lattice. By utilizing entirely fixed-frequency components, we ensure the system is intrinsically robust against 1/f flux noise—a primary decoherence mechanism in superconducting qubits. To prevent

Read the complete text