Direct stress imaging from shear wave propagation

Yiwei Duan, Michel Destrade, Wenchang Tan, Guo-Yang Li · 2026

Read Direct stress imaging from shear wave propagation by Yiwei Duan, Michel Destrade, Wenchang Tan, Guo-Yang Li (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-25385.txt.

Introduction

Stress inside a solid cannot be seen directly; it is usually inferred from shape change through a model of that material. Yiwei Duan, Michel Destrade, Wenchang Tan, and Guo-Yang Li offer a more direct route in 2026 called acoustoelastic imaging. Existing stress changes how shear waves travel, so the team treats the measured wave field as the answer to an inverse problem. Full waveform inversion with physics informed learning recovers the wave equation's coefficients, and stress follows from them.

The method needs no explicit material law and no constants to tune first, a common weak point of older inference. Computer tests and ultrasound trials on unevenly stressed samples rebuilt the stress fields with good accuracy. Spatial detail finer than a third of a wavelength was resolved. The authors aim the framework at complex materials and living tissues alike.

Catalog record

CREATORYiwei Duan, Michel Destrade, Wenchang Tan, Guo-Yang Li
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE63 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.25385

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Direct stress imaging from shear wave propagation Yiwei Duan, Michel Destrade, Wenchang Tan, Guo-Yang Li Abstract Quantitative imaging of stress fields in heterogeneous solids remains challenging because stress is not directly measurable and is typically inferred from deformation using constitutive models. Here we present Acoustoelastic Imaging (AEI), a non-destructive framework for reconstructing stress fields from shear wave propagation. AEI exploits the acoustoelastic effect, whereby pre-existing stress modifies local wave dynamics, and formulates stress recovery as an inverse problem of the governing wave equations. Using full shear waveform inversion with physics-informed learning, AEI reconstructs wave-equation coefficients from full-field wave measurements, enabling estimation of stress magnitude and principal directions without explicit constitutive model specification or material-parameter calibration. We demonstrate sub-wavelength spatial resolution ( < 0.28 ​ λ {<0.28\lambda} ) and accurate reconstruction of nonuniform stress fields in heterogeneous materials through numerical simulations and ultrasound shear wave elastography experiments. These results establish a general framework for high-resolution stress imaging and provide a route toward non-invasive mapping of internal mechanical states in complex materials and biological tissues. Introduction Mechanical stress plays a fundamental role in the behavior and function of soft materials, both biological and artificial. In living tissues, stress regulates essential cellular processes such as migration [ 18 , 1 ] , division [ 10 , 3 ] , and mechanosensing [ 20 , 4 , 32 ] , while at the tissue level, constrained growth and differential forces drive shape changes and mechanical instabilities [ 16 , 14 , 8 ] . Muscle-generated forces underpin nearly all bodily movements [ 29 , 6 ] , and even at rest, tissues remain mechanically stressed in ways critical to physiological function [ 22 , 30 ] . Similarly, in artificial soft materials, internal and applied stresses strongly influence the performance of soft machines, wearable devices, and implantable bioelectronics [ 21 , 25 , 31 ] . Motivated by these observations, developing constitutive models that incorporate initial stress as an additional state variable has become an active area of research, reflecting the growing recognition that pre-existing stress fundamentally alters the mechanical response of soft materials [ 28 , 11 , 5 ] . Accurate knowledge of stress distributions is therefore essential for understanding biological processes, assessing pathology, and optimizing the mechanical performance and reliability of soft materials, including fatigue and failure. Despite its importance, measuring stress in soft materials in situ remains a major challenge [ 23 , 19 , 9 ] . Unlike displacement, which can often be observed directly, stress is a tensorial mechanical state variable that is not directly accessible experimentally. Existing approaches typically infer stress from measured deformations through constitutive models and assumptions about material properties and reference configurations. Examples include destructive techniques such as hole drilling, as well as non-destructive methods based on X-ray diffraction, neutron diffraction, and ultrasound [ 26 , 12 , 2 ] . Although successful in specific settings, these approaches generally require material calibration and often become challenging to apply in soft, heterogeneous, or biologically relevant materials. Consequently, high-resolution mapping of internal stress fields remains a longstanding challenge in mechanics. One promising route towards stress measurement exploits the acoustoelastic effect, whereby pre-existing stress alters acoustic wave propagation. [ 13 , 17 ] . Because stress modifies wave speeds and wave trajectories, information about the underlying stress state is encoded in the measured wave field. Acoustoelasticity has been widely used for nondestructive stress evaluation in engineering materials and has recently attracted growing interest in soft materials and biological tissues. However, existing approaches largely rely on local wave-speed measurements, calibrated higher-order elastic constants, or simplified assumptions regarding geometry and material homogeneity. As a result, stress imaging with high spatial resolution remains largely inaccessible [ 35 , 15 ] . Here we introduce Acoustoelastic Imaging (AEI), a framework for reconstructing stress fields directly from shear wave propagation. The central idea is that stress is encoded in the coefficients of the acoustoelastic wave equations and can therefore be inferred from measured wave fields through inversion. By combining full shear waveform inversion with physics-informed learning, AEI reconstructs these coefficients from full-field shear wave measurements, enabling estimation of both stress magnitude and principal directions without explicit constitutive-model specification or material-parameter calibration. Because the method leverages the full wave field, including near-field components, it achieves sub-wavelength spatial resolution and remains applicable in elastically heterogeneous materials. We validate AEI using numerical simulations and experimental measurements acquired by ultrasound shear wave elastography. The results demonstrate accurate reconstruction of nonuniform and residual stress fields and show that stress can be separated from material stiffness using the same wave measurements. Together, these findings establish a general framework for high-resolution stress imaging and provide a route towards non-invasive characterization of internal mechanical states in complex materials and biological tissues. Results Stress encoding in shear-wave propagation Figure 1: Principle of AEI. (a) Schematic of the stress-free configuration ( \mathcal{B}_{0} ) and the pre-stressed configuration ( \mathcal{B} ), in which shear waves propagate as small-amplitude incremental motions superimposed on the finite stress state. (b) Stress-induced anisotropy of shear-wave propagation in \mathcal{B} under a plane-stress state (\sigma_{1},\sigma_{2}) . The principal stress directions determine the anisotropic wave-speed distribution, establishing the basis for recovering stress from wave measurements. To reconstruct stress from wave measurements, it is first necessary to understand how stress influences shear-wave propagation. The physical basis of AEI is the acoustoelastic effect, whereby pre-existing stress modifies the incremental elastic response of a material and thereby alters the propagation of small-amplitude waves. Consider a Cauchy stress \boldsymbol{\sigma} that deforms an elastic body from a stress-free reference configuration \mathcal{B}_{0} to the current configuration \mathcal{B} , in which shear waves propagate (Fig. 1 a). The infinitesimal (incremental) displacement field \boldsymbol{u}(\boldsymbol{x},t) in \mathcal{B} satisfies the incremental equation of motion [ 24 ] : \frac{\partial}{\partial x_{p}}\!\left(\mathcal{A}^{0}_{piqj}\,\frac{\partial u_{j}}{\partial x_{q}}\right)-\frac{\partial\hat{\bar{p}}}{\partial x_{i}}+\frac{\partial\bar{p}}{\partial x_{j}}\frac{\partial u_{j}}{\partial x_{i}}=\rho\,\frac{\partial^{2}u_{i}}{\partial t^{2}}, (1) where \rho is the mass density in the current configuration, and Einstein summation is adopted throughout. The Eulerian elasticity tensor \boldsymbol{\mathcal{A}}^{0} is defined as \mathcal{A}^{0}_{piqj}=F_{p\alpha}F_{q\beta}\,\frac{\partial^{2}W}{\partial F_{i\alpha}\,\partial F_{j\beta}}, where W(\boldsymbol{F}) is the strain-energy function and F_{i\alpha}=\partial x_{i}/\partial X_{\alpha} is the deformation gradient mapping reference coordinates X_{\alpha} to current coordinates x_{i} ( i,\alpha\in\{1,2,3\} ). For incompressible materials, the Cauchy stress is \boldsymbol{\sigma}=\boldsymbol{F}\,\frac{\partial W}{\partial\boldsymbol{F}}-\bar{p}\,\boldsymbol{I} , where \bar{p} is the Lagrange multiplier enforcing incompressibility, and \hat{\bar{p}} in Eq. ( 1 ) denotes its increment induced by wave motion. Incompressibility further requires \partial u_{i}/\partial x_{i}=0 . A key observation is that the governing wave equation contains elasticity coefficients that are directly linked to stress. Specifically, certain components of the Eulerian elasticity tensor satisfy [ 28 ] : \mathcal{A}^{0}_{ijij}-\mathcal{A}^{0}_{jiji}=\sigma_{ii}-\sigma_{jj}\quad(\text{no summation}). Because these components appear explicitly in Eq. ( 1 ), the stress difference (\sigma_{ii}-\sigma_{jj}) can, in principle, be inferred directly from wave propagation without prior knowledge of the constitutive law. However, this stress difference is coordinate-dependent. Transforming to the principal coordinate system (x^{\prime}_{1},x^{\prime}_{2},x^{\prime}_{3}) , where the Cauchy stress is diagonal with principal stresses \sigma_{1},\sigma_{2},\sigma_{3} , yields \mathcal{A}^{0}_{i^{\prime}j^{\prime}i^{\prime}j^{\prime}}-\mathcal{A}^{0}_{j^{\prime}i^{\prime}j^{\prime}i^{\prime}}=\sigma_{i}-\sigma_{j}. (2) Equation ( 2 ) establishes a direct connection between measurable wave dynamics and the underlying stress state, providing the foundation for stress reconstruction from wave propagation. To illustrate the implications of Eq. ( 2 ), we consider a 2D homogeneous stress state (\sigma_{1},\sigma_{2}) whose principal directions are inclined by an

Read the complete text