Anomalous weak values in a generalized Mach–Zehnder interferometer extracted directly from intensity measurements
Ismaele V. Masiello, Hartmut Lemmel, Andreas Dvorak, Stephan Sponar, Yuji Hasegawa · 2026
Read Anomalous weak values in a generalized Mach–Zehnder interferometer extracted directly from intensity measurements by Ismaele V. Masiello, Hartmut Lemmel, Andreas Dvorak, Stephan Sponar, Yuji Hasegawa (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-24798.txt.
Introduction
Ismaele Masiello and four colleagues find a simpler way to measure weak values in an interferometer. Weak values describe quantum systems between a chosen start and end state. Standard extraction uses weak interactions with a meter state, which adds complexity and slows measurement. The new method needs neither meter states nor weak interactions. It works in a generalised Mach Zehnder interferometer, a device splitting a wave along two paths. Only output intensities and controlled phase shifts between paths are used.
The team demonstrates the technique with matter wave interferometry. They recover path weak values fully from the intensity data. Anomalous weak values show up, as expected for genuinely quantum behaviour. Equivalently, the data imply negative quasiprobability distributions. Accuracy matches or beats the conventional approach. Measurement times shrink because the setup is simpler. Masiello and colleagues note the scheme transfers directly to a broad class of two level quantum experiments.
Catalog record
| CREATOR | Ismaele V. Masiello, Hartmut Lemmel, Andreas Dvorak, Stephan Sponar, Yuji Hasegawa |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 40 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2606.24798
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Anomalous weak values in a generalized Mach–Zehnder interferometer extracted directly from intensity measurements Ismaele V. Masiello, Hartmut Lemmel, Andreas Dvorak, Stephan Sponar, Yuji Hasegawa Abstract Weak values provide a powerful framework for characterizing quantum systems. Their experimental extraction conventionally relies on weak conditioned von Neumann measurements, involving weak interactions and meter states that increase experimental complexity and often limit measurement efficiency. Here we introduce a method to fully characterize path weak-values in a generalized Mach–Zehnder interferometer employing neither meter states nor weak interactions. We experimentally demonstrate the technique in matter-wave interferometry. We identify anomalous weak values and, equivalently, negative quasiprobability distributions, which reflect the nonclassical behavior of the quantum system. The approach relies uniquely on intensity measurements at the output ports of the interferometer combined with controlled relative phase shifts between the paths. The absence of meter states enables considerable simplification of the setup and shorter measurement times, while preserving full access to weak values with comparable or increased accuracy. The scheme is directly applicable to a broad class of experiments involving two-level quantum systems. Corresponding author: Ismaele V. Masiello ([email protected]) 1 Introduction In the study of the physical properties of a quantum system between a pre-selected and a post-selected ensemble, i.e., between its initial state \ket{\psi_{\mathrm{in}}} and final state \ket{\psi_{\mathrm{fi}}} , a measurement outcome known as the weak value arises in the context of weak measurements of an observable \hat{A} [ 1 ] . The weak value is defined as \displaystyle\frac{\braket{\psi_{\mathrm{fi}}|\hat{A}|\psi_{\mathrm{in}}}}{\braket{\psi_{\mathrm{fi}}|\psi_{\mathrm{in}}}} (1) and, unlike the expectation value, this quantity can be complex and may lie outside the eigenvalue range of the observable. Since the first implementation of a weak measurement [ 33 ] , the physical relevance of weak values has been confirmed across a range of impactful experiments. For instance, weak-value amplification enabled the observation of extremely small pointer’s shifts, leading to the first measurement of the spin Hall effect of light [ 21 ] . Weak values are also employed for the direct measurement of the wave function [ 28 ] and for probing nonlocal observables in Hardy’s paradox [ 27 ] . Experiments beyond photonic systems, such as the observation of the quantum Cheshire cat [ 9 , 38 , 5 ] and the observation of the quantum pigeonhole effect [ 37 ] , both performed in neutron interferometry, further affirm the versatility of these techniques. The interpretation of weak values remains open to discussion [ 13 ] . Nevertheless, they were found to play a role across several fundamental theoretical studies of quantum mechanics, including: quantum paradoxes [ 2 ] , uncertainty relations [ 17 ] , quasiprobability distributions [ 30 , 13 , 3 ] , nonclassicality [ 34 , 31 , 26 ] , and more [ 10 , 11 ] . These far-reaching implications confirm that weak values constitute an extremely valuable extension of the standard measurement framework when one seeks to characterize quantum systems between preparation and post-selection, both conceptually and experimentally. In order to exploit the advantages of weak values experimentally, effective and accurate methods of extraction are essential. Conventionally, weak values are obtained from weak measurements in which a meter system interacts weakly with the target system, followed by a readout of the meter [ 21 , 28 , 27 ] . More recently, alternative schemes departing from this standard approach have been implemented. These include employing a classical parameter instead of a meter state while still maintaining a weak interaction [ 29 ] , as well as using strong interaction while still retaining a meter state [ 8 ] . The employment of meter states or the requirement of weak interactions can increase the experimental complexity. The manipulation of additional degrees of freedom increases the amount of required experimental resources, e.g., additional instrumentation and calibration procedures, while weak interactions typically necessitate longer measurement times due to the limited information gained per detection event. In this paper, we propose a method to extract the complete path weak-values in a generalized Mach–Zehnder interferometer, requiring neither meter states nor weak interactions. The approach relies only on intensity measurements at the output ports of the interferometer combined with a controlled relative phase shift between the paths. The experimental verification is performed using a neutron Mach–Zehnder interferometer, enabling the study of the most fundamental element of quantum mechanics—the two-level quantum system—under conditions that challenge classical models: a single massive spin-1/2 particle in a superposition of spatially separated paths. Compared with typical photonic implementations, neutron interferometry is less susceptible to classical interpretations of the results. The setup requires only a small number of commonly used optical elements: two phase shifters, one for state preparation and the other for state manipulation, an absorber to control the relative path intensities, and a beam blocker. We further show that the same result can be obtained using a single phase shifter, reducing the number of required elements. Compared with previous neutron interferometer experiments extracting weak values using meter states or weak interactions [ 29 , 8 , 7 , 15 ] , our method achieves equal or higher accuracy while substantially reducing the number of optical elements and significantly shortening the measurement time. Our results confirm the presence of anomalous weak values, i.e., weak values whose real part exceeds the eigenvalue range, which provide insight into the nonclassical behavior of the quantum system [ 31 , 13 , 26 ] . Neutron interferometry offers several advantages, such as macroscopic beam separation, individual control of the sub-beams, and long interaction and coherence times at room temperature and ambient pressure [ 25 , 32 , 35 , 6 ] . The monolithic crystal structure of the interferometer provides stable experimental conditions, enabling interference contrast that can exceed 90%. Due to the fermionic nature of the neutron, the observed interference is intrinsically a single-particle phenomenon. The possibility to control additional degrees of freedom beyond the path states, such as spin and energy, makes neutron interferometry suitable for the investigation of nonclassical phenomena such as Bell-like inequalities and entanglement [ 19 , 14 ] . For these reasons, neutron interferometry has played a central role in experimental tests of fundamental aspects of quantum mechanics. The proposed scheme is not restricted to the path observables and post-selections of a generalized neutron Mach–Zehnder interferometer. The derivation is independent of the specific choice of two-level quantum system, observables, and post-selections, and therefore applicable to any quantum systems in which similar measurements and controlled phase shifts can be implemented. This makes the presented method suitable for applications in a variety of experiments across different fields, for instance in atom-optics experiments using Rabi oscillations or atom interferometers [ 20 ] , as well as polarimeter experiments [ 25 ] . 2 Results and discussion 2.1 Path weak-values in a generalized Mach–Zehnder interferometer configuration Consider the generalized Mach–Zehnder interferometer scheme shown in Fig. 1 . No assumptions are made about the nature of the interfering quantum particle (e.g., photon, neutron, atom), and the first beam splitter is allowed to have arbitrary transmission and reflection coefficients. After passing through this beam splitter, the particle is prepared in a superposition of the path states \ket{1} and \ket{2} , given by \displaystyle\ket{\psi_{\mathrm{in}}}=\cos{\left(\tfrac{\theta}{2}\right)}\ket{1}+\mathrm{e}^{\mathrm{i}\phi}\sin{\left(\tfrac{\theta}{2}\right)}\ket{2}\,, (2) where \cos^{2}{\left(\tfrac{\theta}{2}\right)} and \sin^{2}{\left(\tfrac{\theta}{2}\right)} denote the relative intensities