A high-fidelity two-qubit gate for multimode superconducting P-mon qubits Preprint: AAPM/123-QED
F. Pfeiffer, F. A. Roy, N. J. Glaser, J. Feigl, L. Koch, K. Kiener, G. Krylov, J. Schirk, C. M. F. Schneider, L. Södergren, F. Wallner, M. Werninghaus, C. A. Riofrío, S. Filipp · 2026
Read A high-fidelity two-qubit gate for multimode superconducting P-mon qubits Preprint: AAPM/123-QED by F. Pfeiffer, F. A. Roy, N. J. Glaser, J. Feigl, L. Koch, K. Kiener, G. Krylov, J. Schirk, C. M. F. Schneider, L. Södergren, F. Wallner, M. Werninghaus, C. A. Riofrío, S. Filipp (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-24772.txt.
Introduction
F. Pfeiffer and thirteen colleagues build a high fidelity two qubit gate for a protected superconducting qubit called the P-mon. Scaling quantum processors needs long coherence times without new channels for decoherence to creep in. The P-mon design answers with two modes: a shielded qubit mode and a separate mediator mode. The qubit mode is shielded from the readout environment. Coupling two P-mons on demand, through their mediator modes, is the step shown here.
Direct interaction between qubit modes is strongly suppressed. Unwanted ZZ type coupling in the idle state falls below 3.6 kilohertz. Tuning the mediator modes onto resonance creates a cross Kerr interaction instead. That gives a qubit state dependent frequency shift. Addressing those transitions selectively implements a controlled Z gate lasting 180 nanoseconds. Its measured fidelity is 99.62 percent. The team presents the gate as a step toward processors that stay sharp as they grow.
Catalog record
| CREATOR | F. Pfeiffer, F. A. Roy, N. J. Glaser, J. Feigl, L. Koch, K. Kiener, G. Krylov, J. Schirk, C. M. F. Schneider, L. Södergren, F. Wallner, M. Werninghaus, C. A. Riofrío, S. Filipp |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 65 KB |
| LICENSE | http://creativecommons.org/licenses/by-sa/4.0/ |
| RIGHTS | CC BY SA |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2606.24772
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A high-fidelity two-qubit gate for multimode superconducting P-mon qubits Preprint: AAPM/123-QED F. Pfeiffer, F. A. Roy, N. J. Glaser, J. Feigl, L. Koch, K. Kiener, G. Krylov, J. Schirk, C. M. F. Schneider, L. Södergren, F. Wallner, M. Werninghaus, C. A. Riofrío, S. Filipp Abstract To scale superconducting quantum processors, it is essential to achieve long coherence times while engineering interactions that do not introduce additional decoherence channels. In superconducting qubit systems, this can be realized using multimode circuits that feature a protected qubit mode alongside a distinct mediator mode. Building on this concept, our recently developed P-mon qubit provides intrinsic protection against decoherence from the readout environment. We extend this approach to controlled two-qubit interactions, by exploiting the mediator modes of P-mons for on-demand coupling. Because direct interactions between the qubit modes are strongly suppressed, unwanted Z Z ZZ -type interactions are significantly reduced to below 3.6 ( 5 ) kHz 3.6(5)~\text{kHz} in the idle state. When tuning the coupled mediator modes on resonance, the cross-Kerr interaction between the qubit and the hybridized mediator modes leads to a qubit-state dependent frequency shift. By selectively addressing these transitions, we implement a 180 ns 180~\text{ns} long CZ gate and determine a fidelity of 99.62 ( 4 ) % 99.62(4)~\text{\%} . These results represent a significant step toward a scalable superconducting architecture that maintains high performance at scale. I Introduction Superconducting qubits have emerged as a leading platform for realizing fault-tolerant quantum computing Krinner et al. 2022 ; Google Quantum AI 2023 ; Google Quantum AI 2025 . As fabrication techniques continue to mature Place et al. 2021 ; Tuokkola et al. 2025 ; Bland et al. 2025 ; Bruckmoser et al. 2026 , the central challenge is to develop scalable processor architectures that preserve the high performance of individual qubits when integrated into large-scale arrays. A key issue is the emergence of additional error channels. Among these, residual qubit-qubit ZZ-type interactions are particularly problematic, as they induce correlated–always-on–coherent errors Gambetta et al. 2012 ; Mundada et al. 2019 ; Krinner et al. 2020 . In the standard transmon architecture Koch et al. 2007 , interactions are typically realized through capacitive couplings, resulting in linear exchange terms. Parasitic ZZ interactions then arise from interaction with higher-energy levels of the transmon DiCarlo et al. 2009 ; Barends et al. 2014 . While such unwanted interactions can be mitigated using frequency-tunable qubits DiCarlo et al. 2009 , this approach increases susceptibility to flux-noise and does not fully eliminate ZZ coupling. Tunable couplers to modulate the linear interaction Chen et al. 2014 ; McKay et al. 2016 can partially solve this issue. Although these allow for sufficient ZZ suppression and high-fidelity gates, they typically require operating transmon-type qubits in the so-called “straddling regime” Koch et al. 2007 , which leads to frequency crowding and increased susceptibility to microwave crosstalk. One strategy to relax these constraints is to use more advanced coupler architectures Goto 2022 ; Li et al. 2024 ; An et al. 2025 . Rather than increasing hardware complexity through additional coupling elements, an alternative strategy is to internalize the coupling mechanism by re-engineering the qubit itself. Here, we follow such an approach and extend the transmon to a multimode circuit, which, in addition to a qubit mode, includes a mediator mode. This mode serves as an indirect link to readout circuits and other qubits. Nonlinear cross-Kerr interactions between the modes occur in these circuits naturally through shared Josephson junction nonlinearities Gambetta et al. 2011 ; Hoffman et al. 2011 ; Srinivasan et al. 2011 ; Roy et al. 2017 ; Roy et al. 2018 , a resource not accessible via purely capacitive couplings. While such circuits have primarily been used to implement nonlinear interactions with readout resonators to enhance protection and readout performance Zhang et al. 2017 ; Dassonneville et al. 2020 ; Dassonneville et al. 2023 ; Hazra et al. 2025 ; Kline et al. 2025 ; Salunkhe et al. 2025 ; Mori et al. 2025a ; Mori et al. 2025b ; Hazra et al. 2026 , they also enable an interaction structure that avoids linear interactions between computational modes entirely. This concept has been demonstrated for the tunable coupling qubit (TCQ) Finck et al. 2021 , which achieved a 740~\text{ns} resonator-induced phase (RIP) gate by utilizing a second-order dispersive interaction, a technique previously developed for transmons Cross and Gambetta 2015 ; Paik et al. 2016 . However, the TCQ architecture faces inherent trade-offs in noise resilience. The qubit mode is protected from Purcell decay, but cannot simultaneously be protected from photon-induced dephasing. Moreover, introducing magnetic-flux control of the mediator mode renders the qubit mode susceptible to flux-noise. To circumvent these limitations, we have introduced the multimode P-mon circuit Pfeiffer et al. 2024 , which features a flux-tunable mediator mode and a flux-noise insensitive qubit mode. In that work, we used the mediator mode to mediate the interaction of the qubit mode to its readout resonator, showing that it can be protected simultaneously against both Purcell decay and photon-induced dephasing. Here, we extend these protection mechanisms to qubit-qubit couplings and show that ZZ -type crosstalk can be efficiently suppressed. By linking the mediator modes of two P-mons via a linear exchange coupling–while the qubit modes remain decoupled–we implement a two-qubit gate scheme that exploits non-perturbative cross-Kerr interactions directly rather than second-order dispersive interactions. When the mediator modes are tuned into resonance, the internal cross-Kerr interactions induce a qubit-state-dependent shift in the hybridized mediator frequencies. Consequently, while the qubits remain effectively isolated when the mediators are in their ground states, driving a state-specific transition generates a cyclic evolution [see Fig. 1 (a)] resulting in a state-dependent phase accumulation and a controlled-phase (CPHASE) gate. II Coupled P-mon Architecture Each P-mon is a four node circuit, as illustrated in the circuit schematic in Fig. 1 (b). Charge oscillations between islands 1 and 2 via the two Josephson junctions form the fixed frequency qubit mode \mathcal{A} . The mediator mode \mathcal{B} between islands 1, 2 and 3 also involves the SQUID loop, making its frequency flux-tunable. While a third mode \mathcal{C} is inherently present in the circuit, it can be decoupled by shifting it to high frequencies through a choice of circuit parameters Pfeiffer et al. 2024 . The nonlinearity of the Josephson junctions gives rise to a cross-Kerr interaction \alpha_{\mathcal{AB}} , which provides a coupling between the qubit and the mediator mode within a single P-mon; as a result, the mediator’s resonance frequency becomes dependent on the qubit’s excitation state. Since island 3 participates exclusively in mode \mathcal{B} , it can be used to selectively couple to the mediator mode without introducing coupling to the qubit mode \mathcal{A} . Consequently, capacitively coupling two P-mon circuits via their respective island 3 induces a linear coupling between the mediators while preventing direct qubit-qubit interaction. Here, we utilize an intermediate bus mode to virtually mediate this interaction Majer et al. 2007 ; Filipp et al. 2011a instead of a direct capacitive coupling to simplify physical routing. For a quantitative understanding, we first consider the effective Hamiltonian of a single P-mon circuit, \displaystyle\hat{H}_{P}= \displaystyle\sum_{m}\omega_{m}\hat{a}_{m}^{\dagger}\hat{a}_{m}+\frac{\alpha_{m}}{2}\hat{a}_{m}^{\dagger}\hat{a}_{m}^{\dagger}\hat{a}_{m}\hat{a}_{m} \displaystyle+\alpha_{\mathcal{AB}}\hat{a}_{\mathcal{A}}^{\dagger}\hat{a}_{\mathcal{A}}\hat{a}_{\mathcal{B}}^{\dagger}\hat{a}_{\mathcal{B}}, (1) where \hat{a}_{m} are the bosonic annihilation operators