A Novel Arm-Length Stabilization Scheme for Gravitational-Wave Detectors with AlGaAs/GaAs Coated Mirrors Preprint: APS/123-QED
Jian Liu, Juntao Pan, Carl Blair, Chiara Di Fronzo, Li Ju, Chunnong Zhao, Sheon S. Y. Chua, Bram J. J. Slagmolen, Nutsinee Kijbunchoo, David Ottaway · 2026
Read A Novel Arm-Length Stabilization Scheme for Gravitational-Wave Detectors with AlGaAs/GaAs Coated Mirrors Preprint: APS/123-QED by Jian Liu, Juntao Pan, Carl Blair, Chiara Di Fronzo, Li Ju, Chunnong Zhao, Sheon S. Y. Chua, Bram J. J. Slagmolen, Nutsinee Kijbunchoo, David Ottaway (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-24149.txt.
Introduction
Liu and colleagues solve an optics problem that blocks the next set of gravitational-wave detectors. Detectors steady their long arm cavities with an auxiliary stabilisation laser, before the delicate science measurement starts. Planned upgrades use new mirror coatings of AlGaAs and GaAs crystal. Those coatings absorb too much of the green light the current scheme relies on. So the scheme fails on the new mirrors.
A multi-wavelength replacement starts from an infrared auxiliary beam. Its wavelength sits safely outside the coating's absorption bands. Tripling its frequency yields green light that phase-locks to the science laser through its own second harmonic, which ties both lasers together. In a tabletop test, Liu's team shows stable control of cavity detuning and a robust shift into locked operation, by steering the auxiliary laser. The 2026 test confirms the scheme can bring future coated detectors onto resonance in a controlled way.
Catalog record
| CREATOR | Jian Liu, Juntao Pan, Carl Blair, Chiara Di Fronzo, Li Ju, Chunnong Zhao, Sheon S. Y. Chua, Bram J. J. Slagmolen, Nutsinee Kijbunchoo, David Ottaway |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2606.24149
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A Novel Arm-Length Stabilization Scheme for Gravitational-Wave Detectors with AlGaAs/GaAs Coated Mirrors Preprint: APS/123-QED Jian Liu, Juntao Pan, Carl Blair, Chiara Di Fronzo, Li Ju, Chunnong Zhao, Sheon S. Y. Chua, Bram J. J. Slagmolen, Nutsinee Kijbunchoo, David Ottaway Abstract The arm length stabilisation system is employed in gravitational-wave detectors to reduce the velocity of the mirrors such that the arm cavities can be brought onto resonance in a controlled manner required to attain the detector operating point. For future upgrades of current gravitational wave detectors such as A # \rm A^{\#} , which will incorporate AlGaAs/GaAs coatings, the current frequency-doubled arm length stabilisation system is unsuitable due to excessive absorption of the frequency-doubled 532 nm beam by the AlGaAs/GaAs coating. We propose a novel multi-wavelength arm length stabilisation scheme that uses both frequency-doubled and frequency-tripled beams. The 1596 nm auxiliary locking beam is outside the absorption bands of AlGaAs/GaAs coating. It is frequency-tripled to 532 nm and phase-locked with the 1064 nm science laser through its second harmonic at 532 nm. In a tabletop setup, we experimentally demonstrated the stable cavity detuning and robust cavity locking transition by controlling the 1596 nm laser and 1064 nm laser phase locked loop. This demonstration confirmed that the proposed novel arm length stabilisation scheme is compatible with future upgrades or third-generation gravitational wave detectors that use AlGaAs/GaAs-coated test masses. I Introduction Current operating ground-based interferometric gravitational-wave detectors (GWDs), including Advanced LIGO Aasi et al. 2015 , Advanced Virgo Acernese et al. 2014 , and KAGRA Aso et al. 2013 , all enhance their sensitivity by using multiple coupled optical cavities. At the detectors’ operating point, these cavities are all maintained on resonance (locked) with control systems. Although mirrors from these cavities are isolated from the ground motion via vibration isolation systems, residual large mirror displacement at low frequencies results in the mirrors swinging through arm cavity resonances. Arm cavity resonance changes the sign of the error signals of power recycling and signal recycling cavities, which are locked before the arm cavities are locked. Therefore, it is essential that the arm cavities are maintained off resonance during the auxiliary cavity lock acquisition. Then the arm cavity needs to be brought onto resonance in a controlled manner such that the sign of the recycling cavity control gains can be switched at the critical moment. As there are multiple length degrees of freedom to be controlled, the sensing signals need to be decoupled to allow for a more deterministic lock acquisition procedure. The arm-length stabilisation (ALS) system is implemented in current ground-based GWDs Staley et al. 2014 ; Mullavey et al. 2011 ; Akutsu et al. 2020 ; Izumi et al. 2012 . In the Advanced LIGO ALS setup, an auxiliary 1064 nm laser is phase-locked to the primary science laser and frequency-doubled to 532 nm through second-harmonic generation (SHG). The 532 nm green light is injected from the end test masses of the arm cavities to pre-stabilise the arm cavity lengths using the Pound–Drever–Hall (PDH) locking technique Drever et al. 1983 . By applying a frequency offset on the 532 nm light with an acoustic-optic modulator, the arm cavities can be locked independently of the carrier light. This allows the arm cavities to be locked on green but maintained away from the main 1064 nm light resonance. Coating thermal noise limits current detector sensitivity around 100 Hz Capote et al. 2025 . Crystalline AlGaAs/GaAs coatings Cole et al. 2013 are a promising candidate for reducing coating thermal noise. While producing AlGaAs/GaAs coatings at scales above 30 cm remains a challenge Cole et al. 2023 , they can potentially reduce the coating thermal noise by a factor of five lower than the current Advanced LIGO \rm Ta_{2}O_{5}/SiO_{2} coating Harry et al. 2007 . The planned \rm A^{\#} Gupta et al. 2024 upgrade to Advanced LIGO detector aims to provide significant sensitivity enhancement compared to Advanced LIGO and test technology for future third-generation observatories, including Cosmic Explorer Evans et al. 2021 and Einstein Telescope Punturo et al. 2010 . \rm A^{\#} plans to incorporate AlGaAs/GaAs coatings to mitigate coating thermal noise. However, this upgrade would render the existing ALS system ineffective, as the AlGaAs/GaAs coatings would absorb the 532 nm auxiliary beam due to the fact that the bandgap of GaAs is 1.43 eV, corresponding to a wavelength of approximately 867 nm Blakemore 1982 . Therefore, a new ALS scheme needs to be developed for cavities that use AlGaAs/GaAs coated mirrors. Tanioka et al. Tanioka et al. 2024 demonstrated that by changing the SHG to an optical parametric oscillator (OPO) in the current ALS system, the frequency-downconverted 2128 nm beam can be used in arm cavity pre-stabilisation instead of the frequency-doubled 532 nm beam. At the same time, they also pointed out that the intrinsic frequency noise of the OPO must be properly managed. In this paper, we propose and experimentally demonstrate a new multi-wavelength ALS scheme that uses 1596 nm laser as the auxiliary locking beam. The auxiliary laser is frequency tripled to 532 nm and the 1064 nm science laser is frequency doubled to 532 nm. The two 532 nm beams are then phase-locked. The phase-locked loop (PLL) Wang et al. 2023 ; Kulur Ramamohan et al. 2024 controls the relative phase between the 1596 nm and 1064 nm lasers. Ramping the offset in the PLL allows a smooth transition between a 1596 nm and 1064 nm lock. Section II introduces the theory of this new ALS scheme, and section III details the experimental setup, followed by the experimental results in section IV . Finally, section V discusses the performance and possible implementation of the ALS scheme in GWDs. II ALS for \rm A^{\#} \rm A^{\#} is a planned baseline upgrade of Advanced LIGO after the 5th observation run. The main Advanced LIGO configuration remains the same with a few key new features of \rm A^{\#} , including higher arm cavity power up to 1.5 MW; a higher level of squeezing with 10 dB frequency-dependent squeezing, larger test masses of about 100 kg and AlGaAs/GaAs crystalline coating to reduce the dominant coating thermal nois. To develop an ALS system for \rm A^{\#} with AlGaAs/GaAs coating using the multi-wavelength scheme, an auxiliary laser frequency must be chosen that can resonate in the arm cavities with AlGaAs/GaAs coated mirrors without excessive optical loss. Then, a phase locking scheme must be established such that the auxiliary laser has a stable phase relation to the 1064 nm science laser. We propose using a 1596 nm laser as the auxiliary laser and phase-locked to the 1064 nm science laser through a combination of SHG and third harmonic generation (THG) processes. The system allows the arm cavities to be controlled with respect to the 1596 nm auxiliary laser and can transition the controls to the main 1064 nm science laser, fulfilling the ALS requirements. The simplified schematic diagram of the proposed ALS system is shown in Fig. 1 : a 1596 nm auxiliary laser is split into two parts through a splitter. Most of the power first goes through a periodically poled potassium titanyl phosphate (PPKTP) SHG crystal, and then through a sum frequency generation (SFG) PPKTP crystal to produce