High Speed High Signal-to-Noise Ratio Antenna Measurements — Demonstration for UAV-Based Near-Field Measurements of Modulated Terrestrial Navigation Signals

Thomas F. Eibert, Denis Unruh, Thomas Mittereder, Alexander H. Paulus · 2026

Read High Speed High Signal-to-Noise Ratio Antenna Measurements — Demonstration for UAV-Based Near-Field Measurements of Modulated Terrestrial Navigation Signals by Thomas F. Eibert, Denis Unruh, Thomas Mittereder, Alexander H. Paulus (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-23569.txt.

Introduction

Eibert and colleagues speed up precise antenna measurements without giving up low noise, in a 2026 radio engineering paper. Antenna tests need a high signal-to-noise ratio, a clean signal well above background noise. Reaching it normally means long receiver integration times at every frequency and position. With thousands of samples, a full near-field scan can take extremely long.

Their approach collects every sample quickly, then cleans the data afterward. A Fourier transform converts the samples, a narrow bandpass filter keeps only the wanted signal, and an inverse transform returns clean samples. The trick works for plain single tones and for modulated carriers with several tones. The team demonstrates it on drone-based near-field data from two navigation aids, a DVOR beacon and an instrument landing system localizer. Converting the cleaned data to the far field yields useful diagnostic information about the antennas.

Catalog record

CREATORThomas F. Eibert, Denis Unruh, Thomas Mittereder, Alexander H. Paulus
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE35 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.23569

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

High Speed High Signal-to-Noise Ratio Antenna Measurements — Demonstration for UAV-Based Near-Field Measurements of Modulated Terrestrial Navigation Signals Thomas F. Eibert, Denis Unruh, Thomas Mittereder, Alexander H. Paulus Abstract Antenna measurements with high signal-to-noise ratio (SNR) require long measurement or integration times of the receiver and can, thus, lead to a very long duration of the measurements, especially if many frequency and spatial samples need to be collected. In order to speed up such measurements, an approach is presented, which collects all measurement samples with short measurement times, performs a Fourier transform of the measurement samples, bandpass filters the desired measurement signals with a small bandwidth, and obtains high-SNR measurement samples according to the short measurement times by inverse Fourier transform. This approach can be utilized with single-frequency continuous wave (CW) transmit signals, but also with transmit signals containing several discrete frequency components, as, e.g., found for periodically modulated CW carriers. The approach is first worked out and demonstrated for simulated test data. Next, it is utilized for the processing of modulated near-field (NF) measurement data collected via an uninhabited aerial vehicle (UAV) at a Doppler high-frequency omnidirectional radio range (DVOR) and at the localizer of an instrument landing system (ILS). The extracted CW NF data is transformed into the far field (FF) and diagnostic information is obtained from the underlying inverse source solutions. I Introduction Antenna measurements can be very time-consuming, especially if many frequency samples are needed and even more if very many spatial measurement samples have to be collected, as in the case of near-field (NF) antenna measurements [ 1 , 2 , 3 ] . An important limiting factor for measurement speed is of course the finite speed of mechanical positioning systems, in particular in stepped measurement modes, where all frequency samples are collected for stationary antenna under test (AUT) and probes. However, even with continuously moving positioner or switched probe arrays, the measurement speed is limited by the measurement time of the radio frequency (RF) measurement system. In order to obtain a measurement sample at a given frequency with a certain signal-to-noise ratio (SNR), a certain measurement time is needed. This time corresponds to the inverse of the measurement bandwidth, which is the intermediate frequency (IF) bandwidth in a heterodyne receiver, such as used in a vector network analyzer (VNA). In a time-domain receiver, this measurement time becomes obvious as the integration time needed for the corresponding short-time Fourier transform into the frequency domain, which is still the standard domain for antenna measurements and corresponding field transformations [ 1 , 2 , 3 , 4 ] . In order to perform antenna measurements with high SNR, the IF or measurement bandwidth must be chosen small, leading to a long measurement time per frequency sample. In a stepped measurement mode, the waiting time in every measurement position must be so large that all frequency samples can be collected, and with a continuously moving positioner system, the speed of the movement must be small enough such that the measurement signal can be assumed stationary within the measurement time of one frequency sample. Formally, such measurements can be accelerated by working with transmit (Tx) signals containing a collection of discrete frequencies, as, e.g., also found for certain periodically time-modulated signals. Transforming the related signals into the frequency domain allows again to treat the different continuous wave (CW) signals separately, e.g., by a corresponding field transformation. The advantage of such an approach is that the measurement or integration time is now only needed once for all frequencies contained in the signal, but it must here at least be so long that the individual frequency contributions can be resolved and extracted. Remarkably, such measurements are not really around in antenna measurements, which might be due to the fact that the commonly utilized VNAs only support CW Tx signals. Moreover, multi-frequency signals can have strong temporal magnitude variations, which are not that easy to handle by the measurement system. Similar is the situation for time-domain measurements with very short impulses, which have the potential to achieve very fast measurement speeds for wideband signals even with good SNR [ 5 , 6 ] . Such measurements received quite some attention many years ago. However, the generation and the handling of the short impulses with large enough signal magnitudes and corresponding linearity problems is in general so problematic that impulse measurements are typically restricted to those cases where they are really mandatory [ 7 ] . The concept of measurements with multiple-frequency signals is of course also relevant, if the measurements need to work directly with the modulated operational signals of communication, sensing, or navigation systems. In [ 8 , 9 ] , NF measurements of continuously modulated signals of terrestrial navigation systems have been considered, where in addition to the already described so-called long-time measurement approach, also a so-called short-time measurement approach was introduced and demonstrated. In this short-time measurement approach, it is assumed that the modulation signal frequencies are considerably smaller than the carrier frequency and the measurements are performed with a VNA working with an IF bandwidth much larger than the modulation signal frequencies. As such, the modulation signal can be assumed constant within the rather short measurement time and the modulation signal is kind of sampled by the performed short-time measurements. With a periodic modulation signal, the measurement samples can be sorted according to their modulation states and CW field transformations can be performed for sub-sets of the measurement samples belonging to identical modulation states. Such an approach works well for continuously modulated signals with small modulation frequencies, however, the achievable SNR is here limited by the short measurement time, which must be so short that the modulation signal can be assumed constant. Considering signals with very different time scales, i.e., a fast time and a slow time, is actually very common in the characterization of mobile communication signals or channels [ 10 , 11 ] . When considering modulated signals with small modulation frequencies, the carrier depends on fast time related to its high frequency and the modulation signal depends on slow time related to its considerably smaller frequencies. In such a situation, Fourier transforms can be performed separately with respect to fast time and slow time. In our measurement problem, performing the measurements with a short measurement time corresponding to a large measurement bandwidth around the carrier frequency, corresponds to performing a Fourier transform with respect to fast time, whose result is still dependent on slow time according to the modulation signal. Performing next a Fourier transform with respect to the slow time, i.e., with a much longer integration time than before, we obtain now the frequency dependent spectrum of the modulation signal and we can detect and extract the contained frequency components in a similar way as in the long-time measurement approach as mentioned before. As such, this two-step approach does not have much benefit compared to the long-time approach. However, if we separate the individual frequency components contained in this short-time frequency spectrum by bandpass (BP) filtering and perform separate inverse Fourier transforms for each of them, then we obtain CW frequency samples for all of them with short-time step size, but with the high

Read the complete text