The Gaia GSP-Spec catalogue of interstellar extinctions, and stellar luminosities, radii, and masses

Patrick de Laverny, Alejandra Recio-Blanco, Camila Navarrete, Pedro A. Palicio, Emanuele Spitoni · 2026

Read The Gaia GSP-Spec catalogue of interstellar extinctions, and stellar luminosities, radii, and masses by Patrick de Laverny, Alejandra Recio-Blanco, Camila Navarrete, Pedro A. Palicio, Emanuele Spitoni (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-03541.txt.

Introduction

de Laverny and co-authors build a Gaia catalogue of starlight dimming and star traits. The GSP-Spec module of Gaia DR3 published air parameters for over five million stars. Those values come from Radial Velocity Spectrometer spectra. The team joins them with parallax and brightness data from Gaia. The result lists interstellar colour excess and extinction for each star.

Stellar luminosity, radius, and mass come with the catalogue. No stellar evolution models are used to derive them. Error bars come from Monte-Carlo runs for over four million stars. A flag system marks quality by spectrum traits, numeric precision, and astrometry. Over a million stars pass the strict cut. Mass proves most sensitive to flaws in the input parameters. Checks against interferometric and asteroseismic data confirm the radii and masses. Sample uses span exoplanet sizes, mass distributions, and halo merger history.

Catalog record

CREATORPatrick de Laverny, Alejandra Recio-Blanco, Camila Navarrete, Pedro A. Palicio, Emanuele Spitoni
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE58 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.03541

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The Gaia GSP-Spec catalogue of interstellar extinctions, and stellar luminosities, radii, and masses Patrick de Laverny, Alejandra Recio-Blanco, Camila Navarrete, Pedro A. Palicio, Emanuele Spitoni Abstract The Gaia /DR3 GSP-Spec module has published the atmospheric parameters of up to 5.6 million stars based on the analysis of their Radial Velocity Spectrometer spectra. By combining these spectroscopic parameters with Gaia parallax and photometric measurements, a large catalogue of interstellar colour excesses and extinctions, complemented with stellar luminosities, radii, and masses, was constructed without relying on any stellar evolution or structure models. This catalogue also contains the associated uncertainties estimated from Monte-Carlo realisations for about 4.6 million stars. We present a system of quality flags based on the GSP-Spec quality parameters, the achieved numerical precision, and the Gaia astrometric quality. Adopting these flags, we defined a subsample of high-accuracy and precision parameters of more than 1.5 million stars. The impact of possible GSP-Spec parameter inaccuracies on the derived extinctions, luminosities, radii, and masses was also explored and revealed that the mass is the most affected quantity. The radii and masses were validated by comparison with interferometric and asteroseismic data. This confirmed their high quality, even when the targets were highly extincted by the interstellar medium. We also emphasise that they are fully compatible and homogeneous with the GSP-Spec parameters. This allowed us to avoid systematics and biases that might be hidden when data from different (and potentially) heterogeneous catalogues are combined. Finally, we present some example applications of this catalogue: (i) exoplanet radii and masses, (ii) present-day mass distribution functions, (iii) identification of Galactic populations based on their mass distribution, and (iv) Galactic halo accreted stellar luminosities and masses that confirm their merger epochs. 1 Introduction Stellar parameters are essential for many fields in astrophysics, from exoplanetary, stellar, and Galactic to extragalactic studies. In general, the main stellar atmospheric parameters (effective temperature T_{\rm eff} , surface gravity log( g ), and mean metallicity [M/H]), plus the individual chemical abundances are estimated from the analysis of the light received from stars with photometric and/or spectroscopic methods. However, other fundamental stellar parameters cannot be directly derived from observations. This is generally the case, in particular, for the stellar radii ( R ) and masses ( M ), not to mention ages. Atmospheric parameters and chemical abundances depend on our knowledge of the physics of the studied stellar object. However, other fundamental parameters additionally depend on our capacity to predict how these physics evolve with time. For example, these quantities are often derived by adopting specific model-dependent technics, such as isochrone fitting for the mass and ages ( Taniguchi et al. 2026 , see, for instance,) . These projection techniques are most often (and better) applied to main-sequence turn-off or subgiant stars because their atmospheric parameters strongly depend on time for these specific evolutionary stages. Another successful method for deriving these stellar fundamental parameters is asteroseismology based on space observations, which can provide much better accuracies, but for only a few thousand red giants ( Schonhut-Stasik et al. 2024 ; Pinsonneault et al. 2025 , among others) . The analysis of the stellar oscillations can indeed provide an accurate radius and mass, through seismic scaling relations and knowing T_{\rm eff} ( Miglio et al. 2013 , see, for instance,) . However, these asteroseismic data are not available for large samples of stars at any stage of their evolution, and in particular, for the main-sequence stars ( Serenelli et al. 2017 ) . For accurate stellar radius measurements, we might also cite interferometric techniques, which can provide good results, but for a rather small number of close stars with well-known distances ( Salsi et al. 2020 ) . All of these methods depend on the knowledge of the stellar atmospheric parameters, in particular, T_{\rm eff} and [M/H]. In this context, the ESA Gaia mission has revolutionised the availability of these stellar parameters by providing accurate and precise parallaxes for several hundred million stars ( Gaia Collaboration et al. 2023b , see, for the third data release,) . For a small fraction of them, whose spectra was collected by the on-board Radial Velocity Spectrometer ( Cropper et al. 2018 , RVS,) , the Gaia GSP-Spec module derived the main stellar atmospheric parameters ( T_{\rm eff} , log( g ), [M/H] a proxy of [Fe/H] 1 1 1 The GSP-Spec metallicity parameter [M/H] indeed traces the [Fe/H] abundance ratio (see, Recio-Blanco et al. 2023 , for details) . , and the \alpha -element abundance enhancement with respect to iron [ \alpha /Fe]) for up to 5.6 million stars (see Recio-Blanco et al. 2023 , for an extensive description of GSP-Spec ) . We here directly estimate supplementary fundamental parameters from the GSP-Spec parameters and adopt a different method than those described above without relying on any stellar evolution model. The interstellar colour excesses and extinctions towards each GSP-Spec stars are indeed computed from their main atmospheric parameters and predicted colours. Then, after computing the bolometric corrections and adopting complementary Gaia astrometric and photometric data, we estimate the stellar luminosities. Finally, it is straightforward to derive the stellar radii and masses when T_{\rm eff} and log( g )are known. All these parameters are thus fully consistent among each other and are free of any assumption of stellar evolution and/or structure. Our work is structured as follows. We first describe in Sec. 2 the computation of the interstellar colour excesses and extinction towards each GSP-Spec star and derive the stellar luminosities, radii, and masses in Sect. 3 . Our catalogue content is presented in Sect. 4 . We explore the effect of possible inaccuracies in the GSP-Spec atmospheric parameters on the interstellar absorption, stellar luminosity, radius, and mass computations in Sect. 5 . The catalogue is then validated by a comparison with literature values in Sect. 6 , and some application examples are discussed in Sect. 7 . Our conclusions are finally summarised in Sect. 8 . 2 Interstellar absorption To compute stellar luminosities and other related quantities (see Sect. 3 ), the interstellar extinction in the Gaia band ( A_{G} ) towards each GSP-Spec target has to be estimated. For this purpose, we first computed new colour excesses and then extinctions by adopting a method that is fully consistent with the stellar parameters derived by GSP-Spec , considering only additional information from Gaia two-band photometry. Our extinctions can therefore be considered to be purely spectroscopic and have the advantage of not being affected by possible ( T_{\rm eff} , colour excess) degeneracies, unlike certain photometric methods. 2.1 Interstellar colour excess Since dust reddens stellar colours, the comparison of intrinsic colours computed from the stellar atmospheric parameters with observed ones allows us to estimate the colour excess caused by the interstellar medium. This method assumes that the stars are accurately and precisely parametrised, which is the case for a very large subsample of the GSP-Spec stars. Practically, this exercise was performed for the Gaia B_{P} and R_{P} magnitudes, which are available for the whole sample. The colour excess (or reddening) in the Gaia bands is thus simply expressed by E_{(B_{P}-R_{P})}=(B_{P}-R_{P})_{Observed}-(B_{P}-R_{P})_{Intrinsic}. (1) The star colours without absorption, (B_{P}-R_{P})_{Intrinsic} , were derived with Eq. 1 of Casagrande et al. 2021 . This

Read the complete text