Kinetics of Droplet Cloaking and Wetting Ridge Growth on Lubricated Polymer Brushes

Antonio Torregrosa Abellán, Enqing Liu, Vincent Siekman, Frieder Mugele, Friederike Schmid, Rodrique G. M. Badr · 2026

Read Kinetics of Droplet Cloaking and Wetting Ridge Growth on Lubricated Polymer Brushes by Antonio Torregrosa Abellán, Enqing Liu, Vincent Siekman, Frieder Mugele, Friederike Schmid, Rodrique G. M. Badr (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-03524.txt.

Introduction

Torregrosa Abellán and co-authors track how fast droplets cloak themselves on lubricated polymer brushes. A wetting ridge grows at the drop's edge as lubricant gathers there. Cloaking spreads a thin lubricant film over the drop. The team mixes experiments, molecular dynamics simulations, and theory. Three systems are compared, with water and a DMSO mix on swollen brushes and on PDMS.

Ridge growth drains lubricant from zones below and outside the drop. That drain slows growth over time, since lubricant must travel through the brush. At high swelling, oil separates from the brush inside the ridge itself. That split adds a second drain path. A continuum diffusion model ties brush free energy to the contact line. It matches ridge growth at middle and late times well. The kinetics are thus governed mainly by diffusion inside the brush. Surface scientists get a predictive frame for these soft coatings.

Catalog record

CREATORAntonio Torregrosa Abellán, Enqing Liu, Vincent Siekman, Frieder Mugele, Friederike Schmid, Rodrique G. M. Badr
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE87 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.03524

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Kinetics of Droplet Cloaking and Wetting Ridge Growth on Lubricated Polymer Brushes Antonio Torregrosa Abellán, Enqing Liu, Vincent Siekman, Frieder Mugele, Friederike Schmid, Rodrique G. M. Badr Abstract We investigate the kinetics of wetting ridge growth and droplet cloaking on lubricant-infused polymer brushes using a combination of experiments, molecular dynamics simulations, and theoretical modeling. We focus on three representative systems: DMSO-water on hexadecane-swollen PLMA (D-H), water on hexadecane-swollen PLMA (W-H), and water on PDMS (W-S). The dynamics are governed by the interplay between interfacial thermodynamics, brush elasticity, and transport of lubricant within the brush. Ridge growth is accompanied by the formation of depletion zones both beneath and outside the drop. This leads to a progressive slowdown governed by the need to transport lubricant through the brush. At sufficiently high swelling, we observe local separation of oil from the brush within the ridge, providing an additional mechanism for lubricant depletion. To rationalize these observations, we develop a continuum diffusion model based on the free energy of the brush and its coupling to the contact line. The model quantitatively captures the growth of the wetting ridge at intermediate and late times, demonstrating that the kinetics are largely controlled by diffusive transport within the brush. keywords Polymer brush, lubricated brush, liquid-like surface, soft wetting, wetting ridge, cloaking, molecular dynamics simulations 1 Introduction Polymer brushes are widely used to modify solid surfaces, with applications ranging from adhesion reduction and lubrication enhancement 50 ; 12 ; 42 ; 26 ; 11 ; 27 to diagnostics 18 ; 25 and biosensing 44 , among others. In many of these contexts, the interaction of polymer brushes with liquids, particularly liquid drops, is essential. Polymer brushes exhibit several advantageous properties. They can adapt to the presence of drops 8 ; 16 or respond to external stimuli 29 ; 36 and change their wetting properties accordingly. In addition, drops on polymer brushes can have low contact angle hysteresis, while the coatings themselves are highly durable, and retain lubricants very well 24 ; 42 . The last property is central for applications such as ball bearings and self cleaning surfaces, where the brush acts as a reservoir for oil lubricants that reduce friction 42 ; 3 ; 7 . The desirable properties of polymer brushes interacting with liquid drops arise from the interplay between brush elasticity, interfacial properties, and the presence of liquid lubricant within the brush. Much effort has been devoted to understanding the interaction of liquid drops with lubricant-infused surfaces 23 ; 35 ; 48 ; 14 ; 13 ; 49 ; 21 and elastomers 41 ; 51 ; 10 . More recently, particular attention has been given to lubricant-infused polymer brushes 42 ; 2 ; 6 . A key question in such systems is whether the lubricant is extracted from the brush in the presence of a drop. Interfacial forces at the three-phase contact line can drive oil separation, leading to the formation of a two-phase wetting ridge 10 or even complete cloaking of the drop 22 ; 30 ; 2 . These processes contribute to lubricant depletion on the substrate and, consequently, to the degradation of surface functionality 35 ; 48 ; 42 . Moreover, the presence of a liquid phase in the wetting ridge can influence drop dynamics by modifying dissipation mechanisms 17 . In this work, we investigate the kinetics of lubricant redistribution during the growth of wetting ridges and the formation of cloaking layers. We adopt a combined experimental, theoretical, and simulation-based approach. Experimentally, we study aqueous Dimethyl sulfoxide (DMSO) drops deposited on Poly-lauryl methacrylate (PLMA) brushes swollen with hexadecane and track the time evolution of the wetting ridge. These investigations are complemented by molecular dynamics simulations of an analogous system. We further use simulations to investigate oil separation in water-PLMA brush systems and to quantify the progression of the nanoscale cloaking layer in a water-PDMS system. Finally, motivated by the observed redistribution of lubricant, we develop a theoretical framework based on a diffusion equation derived from the free energy of the brush and the contact line. 2 Model and Methods We consider systems in which a liquid drop is deposited on a lubricated polymer brush. The primary experimental systems consist of PLMA brushes swollen with hexadecane and PDMS brushes swollen with silicone oil. In both cases, the monomers of lubricant and grafted chains can be regarded as chemically identical, and we treat them as such in our simulations. However, in both experiments and simulation, the number of monomers per oil chain N_{o} is much smaller than that of grafted chains N_{B} . In particular, we have N_{B}>N_{o}^{2} for all of our systems, which implies that the lubricant acts as an athermal solvent for the grafted chains 34 . While water is the primary liquid of interest, aqueous DMSO solutions (DMSO40 corresponding to 40 wt % concentration by weight) on PLMA are also considered to probe lower surface tension conditions. Table 1 shows the experimental values for the relevant interfacial tensions (values for PDMS extracted from Ref. 2 ). (mN/m) air PDMS Hexadecane air 21 28.76\pm 0.18 water 72.6\pm 0.8 40 50.4\pm 0.4 DMSO40 62.3\pm 0.9 31.4\pm 0.6 Table 1: Experimental interfacial tension values of the different interfaces that appear in our systems of interest. Simulation parameters are chosen to reproduce the ratios of interfacial tensions in the experimental systems, ensuring realistic contact angles and spreading behavior. 2.1 Simulations We employ a coarse-grained model system comprising a polymer brush, free oil chains, and a droplet of liquid particles coexisting with its vapor. Brush polymers and oil molecules are modeled as chains of identical beads, denoted p , connected by springs with the spring potential U_{\text{bond}}={\color[rgb]{0,0,0}\frac{1}{2}}k(r_{ij}-r_{0})^{2} . Liquid molecules are modeled as single isolated beads (type l ). To model non-bonded interactions and the coupling to a heat bath at a given temperature T , we use the Many-body Dissipative Particle Dynamics (MDPD) coarse-grained model and thermostat. The DPD thermostat has the advantage that the dissipative and random forces are pairwise interactions and momentum conserving allowing for hydrodynamic phenomena ( 19 ; 15 ; 28 ) , while the multi-body force element allows for modeling the coexistence of two phases ( 31 ; 43 ; 46 ) . The forces take the following form: \displaystyle\mathbf{F}_{ij}=\mathbf{F}_{ij}^{C}+\mathbf{F}_{ij}^{D}+\mathbf{F}_{ij}^{R} (1) \displaystyle\mathbf{F}_{ij}^{C}=\left(A_{ij}w^{C}(r_{ij})+B(\bar{\rho}_{i}+\bar{\rho}_{j})\tilde{w}^{C}(r_{ij})\right)\hat{\mathbf{r}}_{ij}{\color[rgb]{0,0,0}+\mathbf{F}_{ij}^{\text{bond}}} (2) \displaystyle\mathbf{F}_{ij}^{D}=-\zeta w^{C}(r_{ij})^{2}(\hat{\mathbf{r}}_{ij}.\mathbf{v}_{ij})\hat{\mathbf{r}}_{ij} (3) \displaystyle\mathbf{F}_{ij}^{R}=\sqrt{2\zeta k_{B}T}w^{C}(r_{ij})\theta_{ij}\hat{\mathbf{r}}_{ij} (4) \displaystyle w^{C}(r_{ij})=\begin{cases}\bigg(1-\frac{r_{ij}}{r_{c}}\bigg)~~&r_{ij}\leq r_{c}\\ 0~~&r_{ij}>r_{c}\end{cases} (5) \displaystyle\tilde{w}^{C}(r_{ij})=\begin{cases}\bigg(1-\frac{r_{ij}}{r_{d}}\bigg)~~&r_{ij}\leq r_{d}\\ 0~~&r_{ij}>r_{d}\end{cases} (6) \displaystyle\bar{\rho}_{i}=\sum_{j\neq i}\frac{15}{2\pi r_{d}^{3}}\tilde{w}^{C}(r_{ij})^{2} (7) In the above equations, \mathbf{F}_{ij}^{C} is the conservative force contribution where A_{ij}<0 is the strength of the nonbonded attractive part, B>0 is the strength of the density dependent repulsion , and the spring forces \mathbf{F}_{ij}^{\text{bond}}=-k(r_{ij}-r_{0})\hat{\mathbf{r}}_{ij} act only between neighbor monomers on a chain . B must have the same value for all pairs of particles for the forces to be conservative as shown by the no-go theorem of MDPD ( 45 ) . We also have \mathbf{r}_{ij}=\mathbf{r}_{i}-\mathbf{r}_{j} , and \hat{\mathbf{r}}_{ij}=\mathbf{r}_{ij}/r_{ij} . \mathbf{F}_{ij}^{D} and \mathbf{F}_{ij}^{R} are the dissipative and random force contributions respectively, where \zeta is the drag coefficient, \mathbf{v}_{ij}=\mathbf{v}_{i}-\mathbf{v}_{j} , k_{B} and T are Boltzmann’s constant and the temperature respectively, and \theta_{ij} is an uncorrelated Gaussian distributed random variable with zero mean and unit variance. w^{C} and \tilde{w}^{C} are weight functions, \tilde{\rho}_{i} is a weighted density, and

Read the complete text