High-precision passive stabilization of repetition rate for a mode-locked fiber laser based on optical pulse injection Journal: oe

Tingting Yu, \authormark 1 Jianan Fang, \authormark 1 Qiang Hao, \authormark 2 Kangwen Yang, \authormark 2 Ming Yan, \authormark 1,3 Kun Huang, \authormark 1,3,* and Heping Zeng \authormark 1,3,4,5, † \dagger · 2026

Read High-precision passive stabilization of repetition rate for a mode-locked fiber laser based on optical pulse injection Journal: oe by Tingting Yu, \authormark 1 Jianan Fang, \authormark 1 Qiang Hao, \authormark 2 Kangwen Yang, \authormark 2 Ming Yan, \authormark 1,3 Kun Huang, \authormark 1,3,* and Heping Zeng \authormark 1,3,4,5, † \dagger (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-01555.txt.

Introduction

Yu and co-authors stabilize a fiber laser's pulse rate without active control. Mode-locked fiber lasers need a precise repetition rate. Their scheme injects optical pulses into the laser on a schedule. The pulses are electronically modulated before injection. They enter a nonlinear amplifying loop mirror in the resonator. Cross-phase modulation links them to the laser's own pulses. The injected pulses act as a timing trigger tied to a clock. Synchronous mode-locking then starts on its own.

The lock holds over a record capture range of 1 millimeter. Stable operation runs over 15 hours in their tests. No temperature stabilization or vibration isolation was needed. The rate's standard deviation drops as low as 100 microhertz. Injection power, wavelength, and pulse duration all get studied.

Catalog record

CREATORTingting Yu, \authormark 1 Jianan Fang, \authormark 1 Qiang Hao, \authormark 2 Kangwen Yang, \authormark 2 Ming Yan, \authormark 1,3 Kun Huang, \authormark 1,3,* and Heping Zeng \authormark 1,3,4,5, † \dagger
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE28 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.01555

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

High-precision passive stabilization of repetition rate for a mode-locked fiber laser based on optical pulse injection Journal: oe Tingting Yu, \authormark 1 Jianan Fang, \authormark 1 Qiang Hao, \authormark 2 Kangwen Yang, \authormark 2 Ming Yan, \authormark 1,3 Kun Huang, \authormark 1,3,* and Heping Zeng \authormark 1,3,4,5, † \dagger Abstract We have proposed and implemented a novel scheme to obtain high-precision repetition rate stabilization for a polarization-maintaining mode-locked fiber laser. The essential technique lies in the periodic injection of electronically modulated optical pulses into a nonlinear amplifying loop mirror within the laser resonator. Thanks to the nonlinear cross-phase modulation effect, the injected pulses referenced to an external clock serves as a stable and precise timing trigger for an effective intensity modulator. Consequently, synchronous mode-locking can be initiated to output ultrafast pulses with a passively stabilized repetition rate. The capture range of the locking system reaches to a record of 1 mm, which enables a long-term stable operation over 15 hours without the need of temperature stabilization and vibration isolation. Meanwhile, the achieved standard deviation is as low as 100 μ \mu Hz with a 1-s sample time, corresponding to a fluctuation instability of 5.0 × 10 − 12 \times 10^{-12} . Additionally, the repetition rate stabilization performance based on the passive synchronization has been systematically investigated by varying the average power, central wavelength and pulse duration of the optical injection. 1 Introduction Mode-locked fiber lasers offer desirable features of compact size, long-time reliability, freeness of alignment, and flexible customization, which have thus been developed as an attractive light source in numerous fields including time-resolved spectroscopy, laser material processing, and nonlinear optical microscopy [ 1 ] . Especially, ultrafast fiber lasers with spectro-temporal engineering would facilitate broadened advanced functionalities requiring precise timing of pulse trains and accurate positioning of spectral modes [ 2 ] . For instance, the ultrashort pulse train with a regular interval is highly demanded in high-accuracy distance measurement, ultra-low noise microwave generation, high-precision timing synchronization, and high-capacity optical communication [ 3 , 4 , 5 ] . Moreover, simultaneous stabilization of the repetition rate and carrier envelope phase for a mode-locked laser would lead to realizing an optical frequency comb [ 6 ] , which provides a broadband phase-coherent optical source in an increasing number of metrological applications [ 7 ] . Therefore, it is important to develop robust techniques to precisely stabilize the repetition rate of a passively mode-locked fiber laser. In general, the locking of pulse repetition rate always relies on a certain way to compensate the optical-path variation of the laser cavity. The most common method is to control the geometric length, either mounting a movable mirror on a servo-controlled piezoelectric transducer (PZT) [ 8 ] , or attaching intra-cavity fibers on a PZT stretcher [ 9 ] . Typically, the available capture range of the active locking system is about tens of \mu m due to the limited ability of geometric elongation. Although the stretched amount could be extended by circling a long section of fiber around the piezoelectric actuator [ 10 ] , yet inevitable bend-induced loss and birefringence might disturb the mode-locking operation. Additionally, the feedback bandwidth based on the PZT actuator is usually at the level of kHz, which may be insufficient to suppress high-frequency noises. Another practical limitation stems from the involved mechanical parts in these devices, which would degrade the long-term performance due to fiber abrasion or mechanical damage. Alternatively, the stabilization of the round-trip optical path could be realized by controlling the refractive index of the propagation medium. This can be achieved via optical pumping of a dedicated doped fiber, where the resonantly-enhanced optical nonlinearity results in a significant refractive index change according to the Kramers-Kronig relation. In the seminal work, the all-optical approach was demonstrated to stabilize the repetition rate of an all-fiber Er-doped laser with a standard deviation of 22 mHz [ 11 ] . The residual fluctuation was then optimized to be 77 \mu Hz by driving the pump laser diode with a high-precision current source [ 12 ] . However, the capture range of the locking system was also limited to be tens of \mu m [ 13 ] . Therefore, a long-term operation up to hours was obtained by either placing the active fiber on a thermo-electric element [ 11 ] , or containing the fiber laser in a temperature-controlled incubator [ 12 ] . Additionally, the feed-back bandwidth of the locking system is intrinsically restricted by the life-time of the excited state for the doped ion, which is typically at the ms level. In parallel to the aforementioned active locking scheme, the passive fashion for controlling the intra-cavity pulse dynamics of ultrafast lasers has attracted increasing attention in recent years [ 14 ] . In particular, the all-optical passive synchronization based on cross-phase modulation (XPM) has been implemented in various passive mode-locking configurations, e.g. , based on nonlinear polarization rotation (NPR) [ 15 , 16 , 17 , 18 ] , saturable absorber (SA) [ 19 , 20 , 21 , 22 ] , and nonlinear amplifying loop mirror (NALM) [ 23 , 24 ] . Furthermore, the optical synchronization to a master pulse source with a locked repetition rate was demonstrated to passively stabilize the slave laser cavity, where the stability and accuracy could be transferred in a simple but effective way [ 23 , 25 ] . In this case, the instantaneous nonlinear response enabled to access a high-bandwidth feedback, without the need of high-speed electronics and complicated feedback system in the active configuration. However, one remaining inconvenience is ascribed to the stringent requirement of careful cavity-length matching between two ultrafast lasers. Here, we propose and implement an all-optical passive configuration to achieve a high-precision and robust repetition rate stabilization for a mode-locked fiber laser. In contrast to previous instantiations, an electrically modulated pulse source is used to provide a more flexible master injection at an arbitrary repetition rate. Counterintuitively, the long master pulses up to 1 ns is still possible for implementing a tight synchronization to an ultrashort fiber laser. The resultant standard deviation of repetition rate is about 100 \mu Hz for 1-s gate time, corresponding to a fluctuation instability of 5.0 \times 10^{-12} . Moreover, the capture range for the passive locking system is up to 1 mm, which is almost two orders of magnitude longer than that in conventional schemes. In combination with the all-polarization-maintaining fiber architecture, a long-term stable operation has been demonstrated over 15 hours without the need for temperature stabilization and vibration isolation. Figure 1: Experimental scheme for all-optical and passive repetition rate stabilization of a mode-locked fiber laser. (a) Optical pulse generation based on the intensity modulation of a continuous-wave tunable laser at C-band wavelengths. (b) Injection locking of repetition rate for an Yb-doped mode-locked fiber laser. The injected master pulse within the nonlinear amplifying loop mirror propagates along with the clockwise slave pulse. The resultant non-reciprocal phase shift by the cross-phase modulation effect can initiate a stable synchronous mode-locking. Such passive and tight synchronization enables to stabilize the repetition rate with a high precision transferred from the signal generator (SG). (c) Schematic for the cross-correlation measurement of relative timing jitter.

Read the complete text