A passive universal grasping mechanism based on an everting shell

Mythra V. S. Balakuntala † , Safvan Palathingal † , and G. K. Ananthasuresh † · 2026

Read A passive universal grasping mechanism based on an everting shell by Mythra V. S. Balakuntala † , Safvan Palathingal † , and G. K. Ananthasuresh † (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-00470.txt.

Introduction

Balakuntala, Palathingal, and Ananthasuresh build a passive gripper round a shell that flips out. The gripper is one bent piece with no motor at its core. A two-state shell sits at its heart. Arms of beam parts work with that shell to close on a thing.

On touch, the shell flips out and the arms wrap the thing in a cage. Any stiff shape up to a set size and weight can be held. The cage holds its state till a new push flips the shell back. That flip frees the held thing at once. Arm stiffness sets how much weight the grip can bear. Arm size sets the largest thing it can take. Soft spread in the arms keeps force kind.

Catalog record

CREATORMythra V. S. Balakuntala † , Safvan Palathingal † , and G. K. Ananthasuresh †
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE13 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.00470

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A passive universal grasping mechanism based on an everting shell Mythra V. S. Balakuntala † , Safvan Palathingal † , and G. K. Ananthasuresh † Abstract A passive monolithic compliant grasping mechanism that works based on the eversion of an elastically deformable bistable shell is conceptualized. It comprises grasping arms made of beam segments that work in conjunction with the everting shell. The grasper is capable of picking up a stiff object of any shape up to a maximum size and weight. The bistable shell everts upon contact with the object to enable the grasping arms envelop the object forming an enclosure. The mechanism then stays in that configuration until it is actuated again to turn the shell back to its original configuration and thereby opening the enclosure to release the object. The stiffness of the arms decides the payload of the mechanism. The size of the arms decides the largest object that can be grasped and held. The arms have distributed compliance so that they can conform to the shape of the object without applying undue force on it. 1 Introduction Universal passive grippers ought to grasp objects of varying size and shape. In comparison to active multi-fingered grippers, they do not need sophisticated grasping algorithms and thus are easier to implement [ 2 , 10 ] . Passive grippers can be broadly classified as follows: grippers with soft contacts [ 4 , 9 ] , granular grippers [ 1 , 3 , 8 ] , and underactuated grippers [ 7 , 13 ] . In this work, we explore an alternative way to passively grip objects of arbitrarily shaped objects using a monolithic compliant grasping mechanism based on bistable shells, also known as everting shells. Everting shells can maintain two force-free equilibrium states as shown in the Fig. 1 . The bistable shell considered here is stress-free in its as-fabricated state and stressed in its everted state. The ability to maintain two structural orientations without consuming power makes them ideal to be used in a passive gripper. A planar passive gripper using bistable arches was considered before by Nguyen and Wang [ 11 ] . We extend this concept by using everting shell as the critical element and attaching grasping arms to it to conceive a gripper that is passive as well as capable of picking up objects of a variety of shapes. Figure 1 : A typical force-displacement curve of a bistable shell. The gripper is a monolithic design that combines a switching mechanism, an everting shell, and grasping arms. The switching mechanism releases grasped objects by transmitting the input force to the everting shell. The bistable shell everts upon contact with the object to enable the grasping arms envelop the object. In Section 2, we explain the working principle of the gripper in detail. Furthermore, the analysis of the everting shell, switching mechanism and grasping arms is presented. We use finite element analysis (FEA) in ABAQUS [ 5 ] software to obtain force-displacement characteristics for the selected shape of the shell. The switching mechanism is designed by incorporating the force needed to evert the shell and maximum actuation force available. The grasping arms are modeled as cantilever beams to obtain an approximate measure of payload. A 3D-printed prototype and results from preliminary grasping trials are given in Section 3. Section 4 includes the scope for future work. 2 Design 2.1 Working principle The everting compliant gripper consists of the switching mechanism, an everting shell, and grasping arms as shown in Fig. 2 . Figure 2 : The compliant monolithic grasping mechanism based on an everting shell. The mechanism consists of three parts, (1) switching mechanism, (2) everting shell, and (3) grasping arms. The switching mechanism is the connecting element between the actuator and the everting shell. It switches the everting shell from its stress-free configuration to the second stable everted configuration of the shell. Figure 3 shows the grasping arms opening and closing in conjuction with the everting shell. Figure 3 : Bistable shell with contracting mechanism and grasping arms attached. As illustrated in Fig. 4 , these three parts work in the following three steps to grasp and release objects: (1) the input force applied on the switching mechanism switches the everting shell and open the grasping arms to grasp the object of interest (see Fig. 4 (a)-(c)); (2) the everted shell upon contact with the object returns to the stress-free configuration causing the grasping arms to close around the object and grasp it (see Fig. 4 (d)-(f)); (3) the switching mechanism is actuated again to release the object. Figure 4 : Working of the grasping mechanism. The design of the switching mechanism and the grasping arms is dependent on the bistable characteristics of the everting shell. These characteristics determine the topology and size of the switching mechanism, and the dimensions of the grasping arms as explained in the next two subsections. We systematically approach the analysis of the gripper considering the design of an everting shell first, followed by the switching mechanism and the grasping arms. 2.2 Everting shell The two force-free stable equilibrium configurations of the everting shell correspond to the open and closed positions of the gripper. The critical static characteristics of the shell are switching ( F_{s} ) and switch-back ( F_{sb} ) forces, switching displacement ( u_{s} ), and the travel ( u_{tr} ). These characteristics are labeled in the force-displacement curve given in Fig. 1 . F_{s} is the minimum force required by the shell to switch from its stress-free stable configuration to the stressed everted shape. F_{sb} is the maximum force that can be resisted by the shell in the everted state before switching back to its as-fabricated initial shape. u_{s} is the minimum displacement the shell needs to be actuated to initiate its eversion and u_{tr} is the total displacement of the point of interest between the two stable states. Note that the everting shell considered here is bistable solely because of its as-fabricated shape, not due to pre-stress. This is preferred as the gripper in its default closed configuration is stress-free. In the case of planar arches, it is known that a cosine profile does not show bistability for fixed-fixed boundary conditions [ 12 ] . Here, we show that a shell formed from a revolved cosine profile is bistable for fixed-periphery boundary conditions. The height of the shell at a distance r from the center, h(r) , is taken as: h(r)=\frac{h_{mid}}{2}\left[1-\cos\left(2\pi-\frac{2\pi r}{R}\right)\right] (1) where h_{mid} is the height at the midpoint of the shell and R the radius of the planform. We analyze the shell for an uniform thickness, t=1~ mm, h_{mid}=7~ mm, and R=30~ mm using a quasi-static FEA in Abaqus. The dimensions were selected for realizing a prototype design that can be actuated by hand. Young’s modulus and Poisson’s ratio of Verowhite and TangloPlus mixture, a 3D printing material used in Objet Conex 260 for prototyping, were taken as E=1.2~ GPa and \nu=0.3 respectively. For a point load applied at the center of the shell with edge fixed, the force displacement characteristics obtained is shown in Fig. 5 . Note that u_{mid} is the deformation at the point of application of the load,

Read the complete text