Channel Estimation for Movable Intelligent Surface
Daniel C. Alcantara, Josué V. de Araújo, Gilderlan T. de Araújo and André L. F. de Almeida · 2026
Read Channel Estimation for Movable Intelligent Surface by Daniel C. Alcantara, Josué V. de Araújo, Gilderlan T. de Araújo and André L. F. de Almeida (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-00387.txt.
Introduction
Alcantara and co-authors gauge the air path for a smart wall that can slide as well as bend waves. Their set-up pairs a fixed pass-through sheet with a small sheet that moves. The small sheet takes set spots, and each spot forms a fresh train path. That adds a fourth strand to the learn task.
Up-link pilots are cast as a four-way block with a known split form. Fixed sheet phase picks join the move spots in that form. A three-way loop then reads each path and the spot-wise reply. No past lore of the small sheet's phase is a must. That unknown is read from the block's own form. Sims show longer train runs sharpen each part's marks.
Catalog record
| CREATOR | Daniel C. Alcantara, Josué V. de Araújo, Gilderlan T. de Araújo and André L. F. de Almeida |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27 KB |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2606.00387
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Channel Estimation for Movable Intelligent Surface Daniel C. Alcantara, Josué V. de Araújo, Gilderlan T. de Araújo and André L. F. de Almeida Abstract This paper proposes a tensor-based channel estimation framework for an uplink MIMO system assisted by a movable intelligent surface. The considered architecture combines a fixed transmissive metasurface with a smaller movable layer, whose discrete positions create an additional structured training dimension. By jointly exploiting fixed-layer phase patterns and movable-layer positions, the received pilots are modeled as a fourth-order PARAFAC tensor. A trilinear alternating least-squares receiver is then derived to estimate the individual channels and the position-dependent response. Importantly, the proposed method does not require prior knowledge of the movable-layer phase response at the receiver, since this unknown factor is estimated from the tensor structure of the received signal. Simulation results show that increasing the training length improves the NMSE of the estimated factors and the reconstructed cascaded channel. MIS Movable intelligent surface IRS Intelligent reflecting surface RIS Reconfigurable intelligent surface SIM Stacked intelligent metasurface FAS Fluid antenna system RIs reconfigurable intelligent surface irs intelligent reflecting surface PARAFAC parallel factor TALS trilinear alternating least squares BALS bilinear alternating least squares ALS alternating least squares DF decode-and-forward AF amplify-and-forward CE channel estimation RF radio-frequency THz Terahertz communication EVD eigenvalue decomposition CRB Cramér-Rao lower bound CSI channel state information BS base station MIMO multiple-input multiple-output NMSE normalized mean square error 2G Second Generation 3G 3 {}^{\text{rd}} Generation 3GPP 3 {}^{\text{rd}} Generation Partnership Project 4G 4 {}^{\text{th}} Generation 5G 5 {}^{\text{th}} Generation 6G 6 {}^{\text{th}} generation E-TALS enhanced TALS UT user terminal UTs users terminal LS least squares KRF Khatri-Rao factorization KF Kronecker factorization MU-MIMO multi-user multiple-input multiple-output MU-MISO multi-user multiple-input single-output MU multi-user SER symbol error rate SNR signal-to-noise ratio SVD singular value decomposition DFT Discrete Fourier Transform keywords Movable intelligent surface, MIMO, tensor decomposition, PARAFAC, channel estimation. 1 Introduction Future wireless networks are expected to provide high data rates, extended coverage, and energy-efficient operation under increasingly complex propagation conditions. In this context, RIS have emerged as a key technology for creating programmable radio environments by controlling the phase, amplitude, and polarization of impinging electromagnetic waves through nearly passive metasurface elements [ 9 ] , [ 18 ] . Conventional single-layer RIS can improve coverage and spectral efficiency with low power consumption, but its performance depends on accurate passive beamforming and reliable CSI ( CSI ). Several metasurface architectures have been proposed to increase the flexibility of RIS -aided systems. Active RIS introduces amplification to compensate for the double path-loss effect, at the cost of additional power consumption and hardware complexity [ 16 ] . SIM stacks multiple programmable metasurface layers to perform wave-domain signal processing and enable more advanced MIMO precoding/combining operations [ 1 ] , [ 19 ] . In parallel, FAS and movable-antenna concepts exploit position reconfiguration to access spatial channel variations and enhance diversity without relying only on conventional fixed-position arrays [ 14 ] . These developments reveal a common trend: future metasurface-aided systems are moving from purely static reflecting panels toward architectures that introduce new physical degrees of freedom. Among these emerging architectures, the MIS ( MIS ) proposed in [ 21 ] offers an attractive compromise between beamforming flexibility and hardware simplicity. The MIS consists of two transmissive metasurfaces: a larger fixed layer, denoted by MS1, and a smaller movable layer, denoted by MS2. By mechanically shifting MS2 relative to MS1, different subsets of elements are spatially aligned, producing distinct effective phase profiles while keeping the individual phase shifts constant. Therefore, dynamic beam pattern synthesis is achieved through differential position shifting rather than through fast element-wise electronic tuning. Despite this appealing architecture, channel estimation remains a major bottleneck for MIS -assisted MIMO ( MIMO ) systems. As in conventional RIS -aided systems, the passive nature of the metasurface prevents direct baseband observation at the surface, making the individual UT ( UT )- MIS and MIS - BS ( BS ) channels difficult to acquire. Moreover, the movable layer introduces an additional position-dependent response, which must be estimated or calibrated jointly with the wireless channels. Existing works on RIS channel estimation include training-based, semi-blind, and tensor-based strategies [ 20 ] , [ 15 ] , [ 7 ] , [ 12 ] . By retaining the natural coupling across dimensions such as space, time, and coding, tensor models enable parameter estimation with reduced training overhead. Early studies established classical tensor decompositions as effective tools for blind and semi-blind estimation in conventional MIMO systems and space-time-frequency coding schemes [ 4 , 6 , 10 , 5 , 11 ] . In the context of RIS-assisted networks, tensor-based techniques have been successfully applied to decouple cascaded channels [ 8 , 7 , 17 , 2 ] . For example, PARAFAC-based models have been used to estimate cascaded and individual channels in RIS -assisted MIMO systems [ 7 ] , while two-timescale strategies exploit different fading rates to reduce pilot overhead [ 13 ] . However, these solutions do not directly address the additional mechanical degree of freedom of MIS -aided MIMO systems. In particular, the position-dependent phase response generated by MS2 introduces an additional structured dimension that can be exploited for channel estimation but also imposes new identifiability and training-design constraints. This setting is especially challenging from a practical standpoint because the phase response induced by the movable layer may be unknown to the receiver. In the proposed approach, this unknown movable-layer phase matrix is not assumed to be calibrated a priori; instead, it is treated as an additional tensor factor and estimated jointly with the wireless channels. To the best of our knowledge, the channel estimation problem for MIS -assisted MIMO architectures has not yet been addressed in the literature. The contributions of this work are summarized as follows: • We propose a two-dimensional training protocol that combines fixed-layer phase-shift patterns and movable-layer positions, thereby modeling the received signal as a fourth-order PARAFAC tensor. • We derive a TALS-PARAFAC receiver that estimates the UT - MIS channel, the MIS - BS channel, and the position-dependent movable-layer response through conditional least-squares updates. Thus, the receiver can operate without prior knowledge of the movable-layer phase matrix. • We discuss the identifiability and computational complexity of the proposed receiver and evaluate how the number of training slots affects the channel estimation accuracy under the considered MIS constraints. Notation and Properties : Vectors are denoted by boldface lowercase letters, e.g., \boldsymbol{a} , matrices by boldface uppercase letters, e.g., \boldsymbol{A} , and tensors by calligraphic letters, e.g., \boldsymbol{\mathcal{A}} . The transpose and Moore-Penrose pseudo-inverse of \boldsymbol{A} are denoted by \boldsymbol{A}^{T} and \boldsymbol{A}^{\dagger} , respectively. The operator \operatorname{diag}(\boldsymbol{a}) forms a diagonal matrix from \boldsymbol{a} , whereas \operatorname{Di}_{i}(\boldsymbol{A}) denotes a diagonal matrix from the i -th row of \boldsymbol{A} . The Frobenius norm is represented by \|\cdot\|_{F} . The symbols \otimes and \diamond denote the Kronecker and Khatri-Rao products, respectively. The operator \operatorname{vec}(\cdot) vectorizes a matrix, while \operatorname{unvec}_{I\times J}(\cdot) reshapes a vector into an I\times J matrix. The entries, rows, and columns of \boldsymbol{A} are denoted by A_{i,j} , \boldsymbol{A}_{i,:} , and \boldsymbol{A}_{:,j} , respectively. Figure 1: MIMO communications system assisted by MIS 2 System and Signal Models We consider an uplink