Software compensation of trigger-synchronous control-frame errors in qubits and qudits

Gaurav A. Tathed 1,2,†, Nicholas C.F. Zutt 1,2,†, Collin J.C. Epstein 1,2, Crystal Senko 1,2,∗ · 2026

Read Software compensation of trigger-synchronous control-frame errors in qubits and qudits by Gaurav A. Tathed 1,2,†, Nicholas C.F. Zutt 1,2,†, Collin J.C. Epstein 1,2, Crystal Senko 1,2,∗ (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-00358.txt.

Introduction

Tathed and co-authors fix hum-synced steer slips in quantum bits through code alone. Steer tests can face smooth flaws that shift as a run goes on. When a flaw tracks a trigger beat, it can be read and paid back. Their test bit is a trapped barium ion in a lab.

Mains hum in the lab bends the bit's tune in step with its beat. Code-based tweaks to rate and phase pay that bend back. The hum's part in tune drift drops by a wide span. Its phase mark sinks past the floor the tools can see. Gate tests with scant order show top marks for one-bit gates. The fix grows to 16-grade units, where a test task's win rate leaps.

Catalog record

CREATORGaurav A. Tathed 1,2,†, Nicholas C.F. Zutt 1,2,†, Collin J.C. Epstein 1,2, Crystal Senko 1,2,∗
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE73 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.00358

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Software compensation of trigger-synchronous control-frame errors in qubits and qudits Gaurav A. Tathed 1,2,†, Nicholas C.F. Zutt 1,2,†, Collin J.C. Epstein 1,2, Crystal Senko 1,2,∗ Abstract Quantum control experiments are often subject to coherent, time-dependent disturbances that vary over timescales comparable to the experiment duration. We show that when such disturbances are reproducible with respect to a trigger signal, their effect can be measured and compensated through software-defined updates to the control frequency and phase. We experimentally verify the performance of our protocol using a trapped 137 Ba + ion experiencing magnetic-field-induced energy shifts synchronous with the laboratory AC mains power. Using this compensation technique, the calibrated AC line contribution to the instantaneous oscillator detuning is reduced by 21 ( 9 ) × 21(9)\times , and the fitted AC-induced phase amplitude is reduced below the measurement uncertainty. We use randomized benchmarking to validate the compensation performance in quantum gate sequences, recovering an average single-qubit gate fidelity of 99.93(1)% with a magnetic-field-sensitive qubit. Finally, we extend the compensation framework to multi-level qudit control. Using the Bernstein-Vazirani algorithm as a benchmark, we increase the algorithm’s success probability from 10(7)% to 70(9)% in a 16 level system when compensation is enabled. Our results demonstrate that trigger-synchronized coherent errors can be reframed as deterministic control-frame errors and corrected in software. † † † These authors contributed equally. † † ∗ Corresponding author: [email protected]. I Introduction Quantum computing platforms have advanced rapidly, with steady improvements in coherence, gate fidelity, control hardware, and system size 46 ; 20 ; 37 . At the same time, the field has developed a broad set of tools for diagnosing performance, including coherence measurements 46 ; 33 , randomized benchmarking 8 ; 41 ; 17 , and algorithmic demonstrations 50 ; 38 . As systems scale, maintaining reliable performance increasingly requires identifying and suppressing environmental noise that couples into the quantum device. Many error models emphasize stochastic noise sources such as broadband dephasing, amplitude noise, and relaxation 10 ; 6 . In practice, quantum experiments can also be affected by structured, coherent disturbances that leave repeatable signatures in time-domain measurements and benchmarking data 19 ; 48 ; 27 . Unlike broadband stochastic noise, these disturbances are often time dependent and arise from reproducible environmental or technical sources, including vibrations, electrical pickup, power-supply ripple, and modulation-chain imperfections 31 ; 51 ; 35 ; 25 ; 21 ; 22 . A prominent example is interference from the AC mains line signal at 50/60 Hz and its harmonics 40 ; 39 ; 18 . Such disturbances can produce coherent errors by modulating the qubit or qudit transition frequency, drive amplitude, or optical phase through mechanisms such as Zeeman shifts, AC Stark shifts, oscillator detuning, laser-frequency excursions, or line-synchronous effects in the electronic modulation chain 18 ; 7 ; 51 . Existing mitigation strategies often target the physical coupling pathways. These include passive shielding and pickup reduction 40 ; 26 ; 5 , active field cancellation using compensation coils or feedback 26 ; 19 , and broader stabilization of ambient magnetic-field fluctuations 31 . Mechanically coupled noise can be mitigated through direct vibration isolation and dampening or through active monitoring and feedback of interferometer signals 21 ; 35 ; 25 ; 22 . More general closed-loop drift-control techniques can also improve stability, but typically require additional sensing, calibration, or monitoring signals 45 ; 36 . Although these approaches can be effective, they often require additional sensors, coils, shielding, calibration, or changes to the experimental apparatus, and their performance can be limited by bandwidth, latency, added noise, and spatial or channel-dependent coupling 26 . However, many structured disturbances are deterministic and reproducible when viewed in the trigger-referenced frame. This reproducibility motivates a complementary software-based approach: rather than suppressing the disturbance at its source, its coherent effect can be measured, predicted, and compensated directly in the programmed control waveform. Related phase-tracking ideas have been used to correct transport-induced phase accumulation in trapped-ion QCCD devices, where ions experience position- and time-dependent magnetic fields during shuttling 3 ; 34 ; 14 ; 23 . In this work, we present a framework for compensating trigger-synchronous detuning and dephasing errors through software-defined updates to the programmed control waveform. We study the example of magnetic-field fluctuations synchronous with the AC mains line signal, which produce deterministic frequency shifts and accumulated phase errors when experiments are referenced to the line trigger. Rather than suppressing the disturbance at its source, we measure its effect in the trigger-referenced frame and compensate the resulting detuning and phase evolution directly in software. Experimentally, we demonstrate this approach at three levels. First, using Ramsey-type measurements, we suppress both the instantaneous detuning errors and the resulting phase-accumulation errors. Second, we test the compensation at the gate-sequence level using Haar-randomized benchmarking. Finally, we extend the framework beyond two-level qubit control by implementing Bernstein–Vazirani algorithm circuits in a single trapped-ion qudit, showing that the same compensation principle applies naturally to qudits and more general multilevel quantum systems. Figure 1: Compensation protocol and AC line-synchronous magnetic-field reproducibility. (a) Control sequence starting at the line-trigger time origin. All pulse frequencies and phases are programmed relative to a common waveform start, with pulse j applied at start time t_{j} . (b) Example line-synchronous magnetic-field perturbation \Delta B(t) (at purely 60 Hz) in the line-trigger-referenced time coordinate. (c) Corresponding transition frequency detuning and programmed laser frequency. For pulse j , the applied frequency offset is chosen to match the instantaneous detuning, \Delta\omega_{j}^{(\mathrm{comp})}=\delta\omega(t_{j}) , as indicated by the vertical arrow. (d) Phase accumulated by the qubit, \Phi_{\mathrm{AC}}(t) , due to the line-synchronous detuning, together with the programmed laser phase during the pulse windows, in the frame rotating at the reference frequency \omega_{0} . The dashed orange line shows the phase, t\delta\omega(t_{j}), accumulated by the constant-frequency tone used for pulse j when referenced to the global start time t=0 . The vertical arrow indicates the phase correction \phi_{j}^{(\mathrm{comp})} required to match the globally referenced oscillator phase to the qubit’s phase. (e) Repeated measurements of the line-synchronous magnetic-field perturbation over multiple dates, showing that the waveform is reproducible in the line-trigger-referenced frame. (f) Fitted harmonic amplitudes A_{n} of the measured waveforms in (e) for the first ten harmonics of the line frequency. For the dominant 60 , 180 , and 300~\mathrm{Hz} components, the across-date mean amplitudes and standard deviations are 0.321(15) , 0.097(11) , and 0.032(6)~\mathrm{mG} , respectively. (g) Corresponding fitted harmonic phases \phi_{n}/\pi . For the same 60 , 180 , and 300~\mathrm{Hz} components, the circular mean phases are -0.749\pi , 0.813\pi , and -0.735\pi , with circular standard deviations 0.011\pi , 0.024\pi , and 0.091\pi , respectively. The reproducibility of both the time-domain waveform and its harmonic components enables deterministic software compensation of the line-synchronous perturbation. II Compensation protocol We consider a line-synchronous perturbation that changes the detuning between an addressed qudit transition frequency and the programmed control tone. Because the experiment is synchronized to the line trigger, the reproducible component of this perturbation can be written as a deterministic time-dependent detuning \delta\omega(t) in a line-trigger-referenced time coordinate. In the experiments below, we see that the dominant contribution couples as a reproducible time-dependent magnetic-field fluctuation, but the compensation protocol is equally applicable no matter the

Read the complete text