Optical Memory Optimization Across Rubidium Isotopes and Transitions Preprint: APS/123-QED

T. Danielov 1 , I. Puljić 1 , M. Đujić, D. Aumiler, N. Šantić, T. Ban · 2026

Read Optical Memory Optimization Across Rubidium Isotopes and Transitions Preprint: APS/123-QED by T. Danielov 1 , I. Puljić 1 , M. Đujić, D. Aumiler, N. Šantić, T. Ban (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2606-00199.txt.

Introduction

Danielov and co-authors tune light-based memory in warm rubidium gas. Such memory stores a pulse of light and gives it back later. Teams must pick which form of the atom and which light line to use. Each pick shifts how much light is kept and for how long.

They test two forms of rubidium on two light lines. The best runs keep up to 44 percent of the light. Storage lasts up to one and a half thousandths of a second. The top line wins for both atom forms. Warm gas cells with deep light grip make this in reach. A near-tuned scheme, set by fine shifts in one- and two-beam gaps, drives the gains. The tips suit simple rigs.

Catalog record

CREATORT. Danielov 1 , I. Puljić 1 , M. Đujić, D. Aumiler, N. Šantić, T. Ban
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE49 KB
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2606.00199

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Optical Memory Optimization Across Rubidium Isotopes and Transitions Preprint: APS/123-QED T. Danielov 1 , I. Puljić 1 , M. Đujić, D. Aumiler, N. Šantić, T. Ban Abstract We investigate optical memory efficiency and storage time across Rb 85 {}^{85}\mathrm{Rb} and Rb 87 {}^{87}\mathrm{Rb} isotopes on both the D 1 and D 2 transitions. Maximum efficiency of up to 44 % 44\% was achieved using the D 1 line in both isotopes, with up to 1.5 ms storage time. These performance levels are enabled by warm vapor rubidium buffer-gas filled cells, large optical depth, and a near-resonant EIT scheme optimized with respect to the one- and two-photon detuning. Our results provide practical guidelines for optimizing the performance of warm rubidium vapor optical memories in simplified experimental configurations. Furthermore, our results provide a foundation for implementing quantum memories in warm alkali vapours with simultaneous optimization of efficiency and storage time. I Introduction Optical memory enables the on-demand storage and retrieval of light by reversibly mapping photonic states onto long-lived states of matter. When optical memory is used to store quantum states of light, it is referred to as a quantum memory. The rapid development of quantum memories was initially driven by proposals for quantum repeaters 31 ; 37 , devices which enable the long distance quantum communication. Beyond this application, quantum memories are also proposed for quantum computing, where they synchronize probabilistic processes and temporarily store intermediate quantum states 2 ; 18 ; 14 , quantum cryptography for enabling the storage and manipulation of quantum keys for secure communication 21 ; 23 , and more broadly in quantum information processing 15 . A variety of platforms, ranging from doped solid-state systems to cold atomic ensembles, have demonstrated excellent performance in terms of long storage times, high fidelity, and high efficiencies 26 ; 17 ; 10 ; 19 ; 38 ; 11 ; 35 . However, their implementations are often technically demanding, requiring complex experimental infrastructure and operating procedures. Because of their operational simplicity and scalability, warm alkali vapors have become a versatile and widely used platform, enabling technological and scientific advances across a broad range of experiments, including light storage. These vapors, particularly rubidium and cesium, have proven to be highly effective media for optical storage and quantum memory implementations 20 ; 36 ; 6 ; 11 ; 5 . Centimeter-scale vapor glass cells provide high optical depths at moderately low temperatures, while the use of buffer gases and anti-relaxation wall coatings suppresses inelastic wall collisions increasing the atomic coherence times. A record storage time for classical light on the order of one second, together with a memory efficiency of up to \sim 10\% , has been demonstrated in room-temperature cesium vapor 16 . On the other hand, a high efficiency of 43\% and storage time of around 100~\mu s has been demonstrated by tedious pulse shaping in warm rubidium vapor 28 . In optical memories with classical light, optimizing efficiency typically comes at the expense of storage time, and vice versa. A similar trade-off is also observed in quantum memories. Warm vapor quantum memories in glass cells have achieved efficiencies of up to \sim 67\% using cavity enhanced EIT schemes 20 , while even higher efficiencies of \sim 95\% have been demonstrated through intelligently shaped input light pulses 12 . However, the achieved storage time remains relatively short, e.g. on the order of \sim 1.6~\mu\mathrm{s} in 20 . Recently, significant progress in the miniaturization of warm-vapor quantum memories has been achieved through the development of micro-electromechanical systems (MEMS) cells. These cells, which contain alkali vapors, have begun to replace traditional glass cells, with early demonstrations reporting storage efficiencies of a few percent and storage times of several tens of nanoseconds 24 . While quantum memory experiments have advanced substantially, simultaneously achieving high efficiency and long storage times in warm alkali vapors remains a challenge. Here, we addresses this limitation by benchmarking memory efficiency and storage time across rubidium isotopes and optical transitions, using electromagnetically induced transparency (EIT) protocol over a broad experimental parameter space. For this purpose, we employed a conventional centimeter-scale vapor cell filled with buffer gas and operated with coupling and probe laser powers typical of diode laser systems, while avoiding complex protocols and extensive optimization. This study builds upon our previous work 39 in which we demonstrated that the efficiency of optical storage can be significantly enhanced by operating the EIT protocol in a near-resonant regime. In the present study, we perform a detailed investigation of light storage in warm rubidium vapor using such a near-resonant EIT scheme. We measured the memory efficiency and storage times on the 5^{2}S_{1/2}\to 5^{2}P_{1/2} (D 1 ) and 5^{2}S_{1/2}\to 5^{2}P_{3/2} (D 2 ) transition lines of the 85 Rb and 87 Rb isotopes over a range of experimental parameters, including coupling and probe laser frequencies, probe pulse duration, and rubidium vapor temperature. Maximum storage efficiencies of 44\% were obtained on the D 1 line for both isotopes, and agreed within 1\sigma . The longest memory lifetime of 423\pm 23 \mu s was obtained on the D 2 line of the 87 Rb isotope, with up to 1.5 ms storage time. To support our experimental findings, we developed a numerical model based on solving the optical Bloch equations for four-level atoms interacting with two laser fields, in accordance with the experimental protocol. By systematically exploring both isotopes and both the D 1 and D 2 transitions over a broad parameter space, we identify regimes of moderate yet sufficient efficiency and storage times for applications in the synchronization of optical devices and optical buffering, highlighting the robustness of the near-resonant EIT approach. In addition, our results optimize a promising platform for the realization of quantum memories with both high efficiency and extended storage time. The paper is organized as follows. Sec. II describes the experimental setup, and Sec. III outlines the numerical approach based on the optical Bloch equations. In Sec. IV we present the results and compare the achievable optical memory performance in both rubidium isotopes. Sec. V provides a summary. II Experiment In our experiment, we measured the efficiency and storage time of an optical memory in warm vapors of 85 Rb and 87 Rb using a near-resonant EIT protocol. The measurements were performed on the D 1 ( 5^{2}S_{1/2}\rightarrow 5^{2}P_{1/2} ) and D 2 ( 5^{2}S_{1/2}\rightarrow 5^{2}P_{3/2} ) transitions for each isotope. A \Lambda -type configuration is employed, formed by two hyperfine levels of the ground 5^{2}S_{1/2} state and one hyperfine level of the excited state, 5^{2}P_{1/2} or 5^{2}P_{3/2} , depending on whether the D 1 or D 2 transition is used, respectively. In a \Lambda scheme two detunings must be precisely controlled, as shown in Fig. 1 (a): the one-photon detuning \Delta and the two-photon detuning \delta . The one-photon detuning is defined as \Delta=\omega_{c}-\omega_{23} , where \omega_{c} is the frequency of the coupling laser and \omega_{23} is the transition frequency between levels 2 and 3 . The two-photon detuning \delta quantifies the deviation from the two-photon resonance condition, and is defined as \delta=(\omega_{p}-\omega_{c})-\omega_{12} , where \omega_{p} is the frequency of the probe laser and \omega_{12} is the transition frequency between levels 1 and 2 . When measuring the absorption

Read the complete text