Actuator-Aware Inverse Kinematics with Joint-Limit Admissibility for Torque-Controlled Redundant Robots
Mohammad Dastranj 1∗, Mahdi Hejrati 1 and Jouni Mattila 1 · 2026
Read Actuator-Aware Inverse Kinematics with Joint-Limit Admissibility for Torque-Controlled Redundant Robots by Mohammad Dastranj 1∗, Mahdi Hejrati 1 and Jouni Mattila 1 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-31436.txt.
Introduction
Dastranj, Hejrati and Mattila propose actuator-aware inverse kinematics for redundant robots under joint limits. Here the output is the required joint velocity for a downstream torque controller. Their method solves a convex quadratic program for the required joint velocity. Barrier-style bounds give joint-limit admissibility, and a slack variable handles the task equation. Redundancy is resolved by an objective weighing command consistency and torque capacity. Tests on a seven-degree-of-freedom upper-limb exoskeleton show fewer limit-pushing commands and better realised task behaviour.
Catalog record
| CREATOR | Mohammad Dastranj 1∗, Mahdi Hejrati 1 and Jouni Mattila 1 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 32304 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.31436
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Actuator-Aware Inverse Kinematics with Joint-Limit Admissibility for Torque-Controlled Redundant Robots Mohammad Dastranj 1∗, Mahdi Hejrati 1 and Jouni Mattila 1 Abstract This paper proposes actuator-aware inverse kinematics for torque-controlled redundant robots under joint-limit constraints. In the considered architecture, the inverse-kinematic output is not merely a purely kinematic joint-velocity command; it is the required joint velocity supplied to a downstream torque-level controller. Therefore, a small commanded task residual may not necessarily improve realized motion. The proposed method formulates a convex quadratic programming problem whose decision variable is the joint-level required velocity. Control barrier function style bounds impose reference-level joint-limit admissibility, while the task equation is handled through a penalized slack variable. Redundancy is resolved using a controller-compatibility objective that accounts for previous-command consistency and actuator torque-capacity weighting. The method is independent of the particular torque-level controller and can serve as an intermediate IK layer between an endpoint trajectory and a redundant robot controller. Experiments on a virtual-decomposition-controlled seven-degree-of-freedom upper-limb exoskeleton compare the method with standard inverse-kinematic baselines and a constrained task-preserving quadratic programming baseline. The results indicate lower limit-pushing commands, bounded admissible required velocities, and improved realized task behavior in the tested trajectory, without modifying the downstream controller. ©2026 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, including reprinting/republishing this material for advertising or promotional purposes, collecting new collected works for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. \affils 1 Unit of Automation Technology and Mechanical Engineering, Faculty of Engineering and Natural Sciences Tampere University, 33720 Tampere, Finland ([email protected]) ∗ Corresponding author keywords inverse kinematics, torque-controlled redundant robots, quadratic programming, joint-limit constraints, controller-compatible reference generation. 1 Introduction Redundant robots have more actuated joints than are required to realize a given task-space motion. This property gives them extra degrees of freedom that can be used to satisfy additional requirements while preserving the task whenever feasible. In such robots, the control objective is not typically limited to task performance, but may also involve physical interaction requirements, joint or state constraints, and actuator limitations [ 12 , 11 ] . Some upper-limb exoskeletons, such as the seven-degree-of-freedom (7-DoF) experimental platform in this research, are one example of such systems. In redundant robots, multiple joint-velocity commands may correspond to the same endpoint motion. This redundancy increases dexterity [ 4 ] and can be used to avoid certain restrictions, such as joint and actuator limits [ 8 ] . However, when the robot is controlled through a downstream torque-level controller, the selected inverse-kinematic (IK) solution is not merely a purely kinematic velocity command. It provides a joint-level desired motion from which the controller constructs the tracking terms used in the control law. For example, in virtual decomposition control (VDC), the desired motion is combined with pose tracking error to form the corresponding required velocities from which the required torques are computed [ 17 , 10 ] . Therefore, the IK mapping should not only provide a task-preserving velocity solution, but should also account for how compatible the resulting reference is with the downstream controller. Conventional redundant IK mappings are typically formulated at the velocity level by solving the inverse differential kinematics of the task Jacobian [ 13 , 5 , 7 ] . The pseudoinverse gives the minimum-norm least-squares joint velocity, while the general redundant solution adds a null-space velocity component for secondary objectives, such as joint-limit avoidance, without affecting the primary task whenever feasible [ 13 , 5 ] . Near singular configurations, damped least-squares mappings regularize the inverse by relaxing task-space accuracy in favor of bounded joint-velocity commands [ 5 , 7 ] . Thus, these schemes resolve redundancy through kinematic command-level criteria: minimum norm selection, null-space projection, or singularity damping. Compatibility with downstream torque-level control and actuation constraints is not handled explicitly within the IK problem itself. Recent redundant IK formulations often use constrained optimization, such as quadratic programming (QP) or related linear-programming formulations, to encode human interaction [ 14 ] , joint motion limits [ 9 ] , real-time inequality constraints [ 15 ] , whole-body collision avoidance [ 16 ] , manipulability maximization [ 6 ] , and similar objectives in a unified manner. Compared with standard null-space projection, these formulations provide a more direct way to impose constraints and handle competing objectives. In a related direction, control barrier functions (CBFs) provide a formal way to enforce safety-related forward-invariance conditions [ 2 ] , often through QP, and have been widely adopted in safety-critical control [ 1 , 3 ] . In velocity-level IK, CBF-style inequalities can serve as limit-aware filters on commanded joint velocities. Their plant-level interpretation, however, depends on the control architecture. For velocity-controlled systems, the IK-generated joint velocity may be the control input, and such constraints can directly support joint-limit forward invariance. For torque-controlled systems, the IK output is only a reference to the downstream controller, while the physical input is actuator torque. Hence, without a closed-loop dynamic CBF proof, the constraints are interpreted as reference-level joint-limit awareness rather than plant-level safety guarantees. In this paper, we formulate controller-compatible IK for torque-controlled redundant robots as an intermediate reference-generation map from task-space commands to joint-level required velocities for torque-level control. In this study, VDC is used as the downstream controller of the redundant upper-limb exoskeleton to compare different IK redundancy-resolution strategies under the same torque-level control framework. The proposed method formulates a QP whose decision variable is the joint-level reference velocity and whose CBF-style joint-limit constraints impose reference-level admissibility. The task equation is imposed as a soft constraint by introducing a slack variable, rather than using the differential task-kinematic residual directly as the main objective. This preserves the task at the reference level while preventing the task residual from overriding controller-compatibility considerations. The controller-compatibility objective includes joint-level terms relevant to the downstream torque-level controller, namely a reference-velocity step objective and an actuator torque-capacity objective based on known torque limits. The proposed method is compared with pseudoinverse IK, damped least-squares IK, null-space joint-limit-avoidance IK, and a task-preserving QP IK. The task-preserving QP IK baseline uses the same reference-level admissibility constraints as the proposed method, isolating the effect of the controller-compatibility objective from constraint enforcement alone. The results show that the proposed formulation achieves a better balance between admissibility and task preservation: it avoids the limit-related degradation observed in the conventional IK baselines while preserving the realized task more effectively than the constrained task-preserving QP IK. This supports the central premise that, in a torque-controlled redundant robot, IK should not only reduce commanded kinematic error, but also generate joint-level references that remain compatible with the downstream controller. 2 Controller-Compatible Redundant Inverse Kinematics For a redundant torque-controlled robot, let the required task velocity be \boldsymbol{V}_{r}\in{\mathbb{R}}^{m} and the required joint velocity be \boldsymbol{\dot{q}}_{r}\in{\mathbb{R}}^{n} , with n>m . When the task Jacobian \boldsymbol{J}(\boldsymbol{q})\in{\mathbb{R}}^{m\times n} has full row rank, the differential kinematics \boldsymbol{V}_{r}=\boldsymbol{J}(\boldsymbol{q})\boldsymbol{\dot{q}}_{r} (1) has n-m degrees of redundancy. Therefore, multiple required joint velocities may represent the same task velocity when no additional restrictions are active. Eq.