Color-gradient lattice Boltzmann modeling of wetting boundary condition on curved solid boundaries

M. Bhattacharya 1, S. Dash 2, M. Sutar 3, J. Ravinder 3, M. Nimalan 3, A. Subhedar 1 · 2026

Read Color-gradient lattice Boltzmann modeling of wetting boundary condition on curved solid boundaries by M. Bhattacharya 1, S. Dash 2, M. Sutar 3, J. Ravinder 3, M. Nimalan 3, A. Subhedar 1 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-30878.txt.

Introduction

Bhattacharya and colleagues add a wetting rule for curved solid walls to a lattice Boltzmann fluid model with a diffuse interface. The rule updates the phase marker on ghost nodes inside the solid, stretching the settled phase profile into the solid phase. Runs on a graphics processor show the scheme still handles large density and viscosity gaps while keeping stray currents small. It matches analytic answers and prior numeric work for both still and moving contact lines on curved walls.

Catalog record

CREATORM. Bhattacharya 1, S. Dash 2, M. Sutar 3, J. Ravinder 3, M. Nimalan 3, A. Subhedar 1
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE43434
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.30878

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Color-gradient lattice Boltzmann modeling of wetting boundary condition on curved solid boundaries M. Bhattacharya 1, S. Dash 2, M. Sutar 3, J. Ravinder 3, M. Nimalan 3, A. Subhedar 1 Abstract We introduce a wetting boundary condition for curved solid boundaries within a diffuse interface framework for lattice Boltzmann method. The boundary condition relies on updating the order parameter (color/phase-field) values on ghost nodes inside the solid phase. The ghost node color modification rule, in turn, extends the equilibrium color profile into the solid phase. Numerical simulations performed on an NVIDIA A100 GPU demonstrate that the wetting scheme retains the model’s ability to handle large density and viscosity contrasts while producing relatively small spurious currents. The present scheme agrees well with analytical solutions/other numerical works for both static and dynamic contact lines on curved solid boundaries. I Introduction Wetting phenomena play an instrumental role in many technologically important processes, spanning multiple orders of magnitude in length and time scales, such as porous media flow 31 , colloidal film drying 32 , curtain coating 19 and microfluidics 39 . At low capillary and Weber numbers, surface tension effects primarily control the bulk dynamics by introducing a pressure difference across the liquid-gas interface. In addition, surface tension effects can influence the system dynamics via the wetting boundary condition even at high Reynolds and Weber numbers 5 ; 35 . The wetting boundary condition models a contact line moving with a constant contact angle or maintaining a contact angle within a given (hysteresis) window. In this work, we focus on modeling the former for immiscible liquid-gas systems using lattice Boltzmann method. The lattice Boltzmann method 1 ; 21 has emerged as a reliable and efficient tool for numerical investigation of such systems, given its parallelizability and ability to handle complex boundary conditions with relative ease. Accurate implementation of the wetting boundary condition is central to maintaining the overall reliability of the numerical simulations involving contact lines. For example, accuracy of the wetting boundary condition directly influences errors in the measurement of capillary forces on solid particles 27 ; 7 . In continuum models, the wetting boundary condition is stated for sharp interfaces that relates the angle between the normal to the solid boundary and the normal to the liquid-gas interface to the equilibrium contact angle. On the other hand, common numerical frameworks 34 represent the fluid–fluid interface as diffuse, while the solid-fluid boundary remains sharp. An order parameter (phase-field, density or color-field) is used to distinguish between fluid phases. Diffuse interface models strive to mimic the sharp interface wetting boundary condition locally across the diffuse interface by adjusting the gradient of the order parameter at the contact line. In this context, it is useful to introduce boundary nodes for fluid and solid phases. The solid (fluid) boundary nodes are those with at least one neighbor that is fluid (solid), as defined by the given stencil. The solid boundary nodes are also referred to as ghost nodes, as fluid dynamical quantities are not evaluated at these nodes. Numerous approaches have been employed to model wetting boundary conditions in diffuse interface frameworks. These include: prescribing a constant order parameter at ghost nodes (fictitious density methods) 28 ; 24 , reorienting the unit normal to the phase field at fluid boundary nodes 22 ; 2 , geometrically enforcing the contact angle at the interface 11 ; 47 ; 40 , incorporating solid–fluid surface energy formulations 23 , and linear extrapolation of the order parameter at the solid boundary 13 . These approaches may suffer from several limitations including: introduction of artificial mass source or sink at solid boundaries 45 , generation of spurious velocities near interfaces 10 ; 12 , restrictions to planar solid geometries 26 ; 25 , increased non-locality due to the use of higher-order stencils for gradient evaluation 26 , inconsistencies between the locations where no-slip and wetting boundary conditions are enforced 22 , and errors introduced due to linearization of the order parameter profile near solid boundary 13 . We introduce a wetting boundary condition for curved solid boundaries in two dimensions. The scheme relies on adjusting the order parameter on ghost nodes such that the equilibrium order parameter profile is extended in the solid phase. A color-gradient model 36 ; 37 that employs a velocity-based equilibrium distribution function is used to solve fluid dynamical equations for two immiscible fluid phases. Accuracy of the proposed scheme is assessed against analytical solutions and the scheme of Fakhari et al. 13 for both static and dynamic contact lines on curved solid boundaries. Numerical simulations are performed using a JAX-based 9 framework running on NVIDIA A100 GPUs. We also quantify spurious currents near contact lines and assess the computational performance of the implementation on GPUs. The rest of the article is organized as follows: Fluid dynamical equations in the bulk phases and the proposed wetting boundary condition are introduced in section II . Numerical benchmarks comparing the proposed scheme with analytical solutions and other numerical schemes, along with computational details, are elaborated in section III . A summary of current work is discussed in section IV . II Wetting Boundary condition We use a color-gradient model 37 to simulate incompressible immiscible Newtonian two-phase flow. The emergent equations of the model are \displaystyle\nabla\cdot\mathbf{u} \displaystyle=0, (1) \displaystyle\frac{\partial\mathbf{u}}{\partial t}+\mathbf{u}\cdot\nabla\mathbf{u} \displaystyle=\frac{1}{\rho}\left(\nabla\cdot\bf{\Pi}+{\mathbf{F}_{\text{s}}}+\rho\mathbf{g}\right), (2) \displaystyle\frac{\partial\varphi}{\partial t}+\nabla\cdot(\varphi\mathbf{u}) \displaystyle=\nabla\cdot\left[M_{\varphi}\left(\nabla\varphi-\frac{4\varphi(1-\varphi)}{W}\mathbf{\hat{n}}_{\varphi}\right)\right], (3) where \mathbf{u} is fluid velocity, \rho is fluid density, \mathbf{\Pi}=-p_{\text{h}}\mathbf{I}+\mu\left(\nabla\mathbf{u}+\nabla\mathbf{u}^{T}\right) is stress tensor, p_{\text{h}} is pressure, \mathbf{I} is identity matrix, \mathbf{F}_{\text{s}} is surface tension force, \mathbf{g} is acceleration due to gravity, \varphi is color-field (phase-field) indicator that differentiates fluid phases, W is liquid-gas interface width, M_{\varphi} is liquid-gas interface mobility and \mathbf{\hat{n}}_{\varphi}=\frac{\nabla\varphi}{|\nabla\varphi|} is unit normal to the liquid-gas interface defined when |\nabla\varphi|\neq 0 . The color-field takes value \varphi=1 in the liquid (heavier) and \varphi=0 in the gas (lighter) phase. We use subscripts l and g to denote the liquid and gas phase properties, respectively. The fluid density and kinematic viscosity are defined as \rho=\rho_{\text{l}}\varphi+\rho_{\text{g}}(1-\varphi) and \frac{1}{\nu}=\frac{\varphi}{\nu_{\text{l}}}+\frac{1-\varphi}{\nu_{\text{g}}} , respectively. The surface tension force \mathbf{F}_{\text{s}} in Eq. ( 2 ) is modeled as \displaystyle\mathbf{F}_{\text{s}}=-\sigma\left[\frac{48}{W}\varphi(1-\varphi)\left(\varphi-\frac{1}{2}\right)+\frac{3W}{2}\nabla^{2}\varphi\right]\nabla\varphi, (4) where \sigma is the liquid-gas surface tension. In the absence of fluid velocity \mathbf{u} , equilibrium color profile \varphi^{\text{eq}} , solution of Eq. ( 3 ), is given by \displaystyle\varphi^{\text{eq}}(\eta)=\frac{1}{2}\left(1\pm\tanh\left[\frac{2\eta}{W}\right]\right), (5) where \eta is a local curvilinear coordinate that is normal to the liquid-gas interface, such that \eta=0 identifies the sharp interface. The equilibrium solution does not depend upon the coordinate that is perpendicular to the \eta coordinate. A useful property of the equilibrium solution, Eq. ( 5 ), is that the derivative with respect to \eta can be expressed locally as a function of \varphi alone. \displaystyle\frac{\partial\varphi^{\text{eq}}}{\partial\eta}=\frac{4}{W}\varphi^{\text{eq}}(1-\varphi^{\text{eq}}). (6) Figure 1: Schematic depicts a part of a solid boundary (solid black line) and computational nodes in the vicinity. Solid boundary (bulk) nodes are shown with hollow (filled) squares. Similarly, fluid boundary (bulk) nodes are shown with hollow (filled) circles. The wetting boundary condition, Eq. ( 9 ), is enforced by updating ghost node color-field \varphi_{\text{G}} at \mathbf{x}_{\text{G}} based upon the contact angle \theta and color-field \varphi_{\text{F}} at a point \mathbf{x}_{\text{F}} in the fluid domain that is distance \Delta x away from \mathbf{x}_{\text{G}} in the direction of normal to the

Read the complete text