The relative interfacial thermal contraction as a possible origin of the low energy excess in cryogenic calorimeters Preprint: APS

Vanessa Zema, Pasquale Pavone · 2026

Read The relative interfacial thermal contraction as a possible origin of the low energy excess in cryogenic calorimeters Preprint: APS by Vanessa Zema, Pasquale Pavone (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-30194.txt.

Introduction

Vanessa Zema and Pasquale Pavone trace the low-energy excess in cryogenic calorimeters to thermal-contraction mismatch at interfaces. Sensitive rare-event detectors show a rising low-energy spectrum of unknown origin. They trace it to mismatched contraction between the absorber and the silicon dioxide layer under transition-edge sensors. Contraction during fabrication and cooldown can nucleate surface dislocations, and other mismatched interfaces can do the same. A simple elastic model links the effect to observations. The paper proposes designs to test and mitigate it.

Catalog record

CREATORVanessa Zema, Pasquale Pavone
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23838
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.30194

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The relative interfacial thermal contraction as a possible origin of the low energy excess in cryogenic calorimeters Preprint: APS Vanessa Zema, Pasquale Pavone Abstract Low threshold cryogenic calorimeters are a key technology for the advancement of rare-event searches. However, since a few years their sensitivity reach is challenged by the presence of a rising spectrum at low energies named low-energy excess (LEE), ascribed to an unknown background. In this work, we describe the LEE as absorber events induced by the relative thermal-contraction coefficient mismatch between the absorber and the SiO 2 amorphous layer underneath the transition-edge sensors (TESs), present for example in the case of CRESST detectors. The relative contraction in processes with temperature changes, such as during sensor fabrication and cooldown from room temperature to the temperature of operation, can induce surface dislocation nucleation. Other interfaced materials with thermal-expansion mismatch can also generate dislocations during temperature-variation processes. We formulate a simple elastic model to bridge this solid-state effect and the LEE observations. Double-TES modules have been designed to provide surface background rejection. We highlight that the presence of the LEE in the coincident event band of double-TES modules does not exclude the explanation given in this work. Exemplary, we discuss the role of the thermal boundary resistance between absorber and sensor as explanation for the presence of the LEE in the coincident-event band. We propose detector designs to test these hypotheses and mitigate the LEE. I Introduction A cryogenic calorimeter consists of a crystal target named absorber and a phonon sensor in thermal contact with the absorber surface. Detectors based on cryogenic calorimetry are commonly employed for rare-event searches because of the exceptional energy resolution at low energies. However, the application of cryogenic calorimeters for rare-event searches is currently challenged by the observation of an unexpected rise of the event rate at low energies, named low-energy excess (LEE) 14 ; 10 . CRESST-III has excluded dark matter and any other external radiation as major sources because the observed LEE does not scale with the mass of the absorber and decays with time 2 ; 10 . Also, by performing thermal cycles at different temperatures, EDELWEISS 15 , CRESST-III 2 and others 10 showed that a component of the LEE rate can be recharged by warming up the cryostat, and subsequently decays with fast decay times after data taking at base temperature is resumed. NUCLEUS has recently reported on observations indicating a correlation of the initial LEE rate with the time duration of the cooldown, showing lower initial rates with slower cooldowns 1 . CRESST-III data taken right after a neutron calibration shows that radiation damage induced by neutron scattering does not have an impact on the LEE ( 2 , Figure 5). Another observation is that the LEE events have the same pulse shape as absorber events 2 . TESSERACT has recently reported on two measurements dedicated to LEE investigations: The first showing a LEE which increases with increasing target volume, for energies below about 30 eV 11 ; the second showing that fast-neutron induced defects are not a major source of their LEE background 4 . The difference in the LEE mass scaling rule between CRESST-III and TESSERACT may point towards the presence of different components of the LEE contributing to the overall energy spectrum. The hypothesis investigated in this work, 1 1 1 Part of this work was already presented in the context of the EXCESS workshop, see e.g. , 30 ; 10 which fulfills all observations (except for the mass scaling observed by TESSERACT below 30 eV which we address below), is that part of the LEE originates from the mismatch between the thermal-expansion coefficient (TEC) of both sensor and absorber. In the specific case of CRESST, the stress may generate from the mismatch between the TEC of the amorphous SiO 2 layer underneath the sensor and the absorber. Such a mismatch would induce a shear stress at the interface, which above a certain threshold displacement energy can result in surface dislocation nucleation 31 ; 6 . Studies of bulk dislocation nucleation connected to the thermal expansion mismatch between crystal lattice and contaminants or defects ( inclusions ) are also present in the literature 6 . This mechanism may contribute to the mass-scaling behavior observed by TESSERACT. The relaxation of these dislocations may cause the observed LEE, with mechanisms similar to the lattice defect relaxations discussed in 22 . However, since 22 refers to lattice damages induced by radiation and not by thermoelastic stress, dedicated atomistic simulation based on molecular dynamics and density-functional theory are ongoing, motivated by this work. An experimental effort towards the mitigation of the LEE via surface-background rejection is the development of double-TES readouts, consisting in target crystals equipped with two TESs or two TESs lines fabricated on their surfaces 3 ; 11 . Events in coincidence are interpreted as particle events; events in only one TES are rejected because they are ascribed to surface backgrounds. In this work we motivate why these experimental results do not exclude that the TEC absorber/sensor mismatch can induce LEE events, on the basis of the phenomenology of phonon propagation and thermal boundary resistance mismatch between absorbers and sensors. In Section II we present a theoretical simple model to predict the energy produced during a cryogenic cooling by the TEC mismatch and compare to the energy scale of the LEE spectrum. In Section III we describe surface dislocation nucleation and threshold dislocation energy, largely described in material science and engineering and we contextualize this research to our case of study. In Section IV we report on the possible effect of thermal boundary resistance mismatch at the interface on the attempted surface-event-rejection with double-TES readout modules. In Section V we propose tests of these hypotheses and detector designs which could mitigate or ideally eliminate the LEE. II Thermal-expansion coefficient mismatch The linear TEC at constant pressure is defined as 7 , \alpha(T)=\frac{1}{L}\left(\frac{\partial L}{\partial T}\right)_{\!\!P}, (1) where L is the length, T the temperature, and P the pressure. Figure 1: Thermal-expansion coefficient of SiO 2 with mixed orientation and CaWO 4 as a function of temperature. Additional points have been kindly provided by A. Senyshyn, author of 26 , under explicit request for this study. The data points are from 26 for CaWO 4 and 28 for SiO 2 with mixed orientation. Measurements of the linear TEC in different materials at low temperatures are available in the literature 28 ; 12 ; 9 ; 26 . In Fig. 1 we report the linear TEC of CaWO 4 measured along the c -axis (dark-blue squared markers), fitted with a polynomial function (dark-blue dashed curve) and the one along the a -axis (dark-blue round markers) fitted with a polynomial function (dark-blue solid line) 26 . These data are also compared to the ones of SiO 2 with mixed orientation 28 (green markers and dashed curve). Assuming that the experimental values reported in literature are comparable to the ones of the CRESST modules, Fig. 1 shows a mismatch of the thermal contraction which could induce a shear stress at the interface between the absorber and the SiO 2 layer. It is evident that the TECs of CaWO 4 along the c

Read the complete text