Two-way coupling of gravity waves and wind farm wakes: a reduced-order boundary-layer model

Hossein A. Kafiabad \aff 1, Majid Bastankhah \aff 2 · 2026

Read Two-way coupling of gravity waves and wind farm wakes: a reduced-order boundary-layer model by Hossein A. Kafiabad \aff 1, Majid Bastankhah \aff 2 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-30077.txt.

Introduction

Hossein A. Kafiabad and Majid Bastankhah model how gravity waves and wind-farm wakes push on each other, using a fast reduced-order boundary-layer framework. Starting from the non-hydrostatic Boussinesq equations, they derive separate equations for the boundary layer and the stratified air above, linked at the capping inversion. A mixed spectral and finite-difference scheme solves a semi-infinite farm in seconds on an ordinary laptop. Checks against large-eddy simulations reproduce both farm flow and wave effects, including upstream blockage and faster wake recovery downwind.

Catalog record

CREATORHossein A. Kafiabad \aff 1, Majid Bastankhah \aff 2
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29606
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.30077

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Two-way coupling of gravity waves and wind farm wakes: a reduced-order boundary-layer model Hossein A. Kafiabad \aff 1, Majid Bastankhah \aff 2 Abstract This paper develops a reduced-order framework for modelling the two-way coupling between gravity waves and turbulent wakes in large-scale wind farms. Linearising the non-hydrostatic Boussinesq equations and introducing simplifications appropriate to the boundary layer and the overlying stratified free atmosphere yield separate governing equations for the two regions. These are coupled through a dynamic boundary condition at the capping inversion, which directly captures the feedback of gravity waves on the boundary-layer flow. A mixed spectral-finite-difference discretisation yields a computationally efficient model while retaining vertical boundary-layer structure. Comparisons with large-eddy simulations (LES) confirm the model successfully reproduces both internal wind-farm flow and large-scale gravity-wave effects. It captures the upstream blockage induced by adverse pressure gradients, as well as the accelerated wake recovery within and downwind of the farm, driven by favourable pressure gradients. \lefttitle H.A. Kafiabad and M. Bastankhah \righttitle Journal of Fluid Mechanics \corresau Hossein Kafiabad, , Majid Bastankhah keywords 1 Introduction Figure 1: Interaction of a wind farm with a CNBL. The red and blue curves show schematic potential-temperature and background velocity profiles, respectively. The rapid growth of the wind energy sector has brought wind farms to a scale that is no longer small relative to the surrounding atmosphere. While older farms could be modelled as modest perturbations to the Earth’s surface roughness, modern utility-scale farms are now comparable in size to the atmospheric boundary layer (ABL) thickness. This increase in scale creates a complex two-way interaction between the wind farm and the atmosphere, making phenomena that were negligible for smaller farms central to understanding both wind-farm performance and atmospheric-flow response. A key driver of these phenomena is the thermal stratification within the atmosphere. Even when the boundary layer itself is neutral, stratification is typically present above the ABL in the form of an abrupt temperature jump at the capping inversion and a more gradual variation in the free atmosphere above (figure 1 ). This structure is called a conventionally neutral boundary layer (CNBL). In this case, the wind farm’s interaction with the overlying stratified layers generates large-scale gravity waves. These waves are triggered when the extraction of energy by turbines and the subsequent reduction of wind speed at hub height create vertical motions in the ABL to satisfy continuity. These vertical motions displace the capping inversion, generating interfacial waves , associated with oscillations of the capping inversion, and internal waves , caused by stratification in the free atmosphere. The generation of these gravity waves induces pressure gradients in the ABL that feed back on the wind speed at hub height ( 2 ; 3 ) . Beyond causing significant wind-farm blockage ( 15 ) , this pressure gradient can impact the recovery of turbulent wakes within and downwind of wind farms ( 16 ) , highlighting the importance of gravity-wave dynamics for modelling farm-to-farm interactions and resolving wake disputes between operators. The high-fidelity approach for modelling gravity waves and farm turbulent wakes is Large Eddy Simulation (LES) ( 1 ; 2 ; 17 ; 15 ; 16 ; 21 ; 12 ; 13 ) . However, properly capturing gravity waves in LES is computationally expensive and challenging as the massive spatial extent of gravity wave propagation requires significantly large domains. Moreover, the sensitivity of these waves to boundary conditions demands careful numerical treatment ( 15 ) . These expensive simulations might be therefore unsuitable for large parameter sweeps, layout optimisation, or real-time farm control; precisely the areas where the wind-energy industry most urgently needs reliable tools. To tackle these challenges, earlier studies developed reduced-order models to represent gravity-wave effects in wind farms. 19 introduced the foundational model by linearising the ABL governing equations for vertically uniform perturbation fields and relating the pressure perturbation to capping-inversion displacement through internal and interfacial wave dynamics. While successful in qualitatively capturing the impact of gravity waves, this approach relied on two simplifying assumptions: the flow fields and farm forcing were vertically uniform, and the forcing was prescribed independently of the wave response. Subsequent studies tried to address these limitations. 3 introduced a multi-layer approach, splitting the boundary layer into a farm layer (with farm forcing) and an upper layer (without farm forcing). Other studies ( 20 ; 7 , e.g.,) further developed this approach by coupling linearised gravity-wave models with engineering wake models through an iterative procedure to capture the two-way interaction between wake evolution and gravity waves. Despite this important progress, two significant modelling challenges remain. First, the multi-layer approach does not fully capture the continuous vertical variation of the boundary-layer flow. Second, existing approaches couple linearised gravity-wave models with engineering wake models, resulting in a highly parametrised system. The wave component typically requires parametrisations of turbulent diffusion and interfacial shear stresses, while engineering wake modelling introduces additional choices such as the single wake model, wake recovery rate, superposition method, and local blockage model ( 7 ) . Together, these challenges highlight the need for a more unified framework with improved mathematical tractability and reduced parameter dependence. In this paper, we develop such a framework: a boundary-layer model that resolves the continuous vertical structure of the ABL and captures the two-way coupling between wake flows and gravity waves. We compute the flow distribution within the ABL using a reduced-order, linearised numerical model, while the feedback from gravity waves on the ABL flow is naturally captured through the boundary conditions at the top of the ABL. We use an idealised 2D semi-infinite wind farm here as a proof of concept, but the developed framework can be readily extended to finite wind farms and complex terrain in future work. 2 Model development 2.1 Governing equations We consider a background flow with horizontal velocity U(z) and no vertical velocity. Neglecting the horizontal variation of U (assuming the length scale of the background flow is much larger than that of the wind farm) and linearising the steady two-dimensional non-hydrostatic Boussinesq equations about this background flow yields \displaystyle U\partial_{x}{u}+wU^{\prime} \displaystyle=-\partial_{x}{p}+\partial_{z}{\tau}+f, (1a) \displaystyle U\partial_{x}{w} \displaystyle=-\partial_{z}{p}+b+\partial_{x}{\tau}, (1b) \displaystyle\partial_{x}{u}+\partial_{z}{w} \displaystyle=0, (1c) \displaystyle U\partial_{x}{b}+N^{2}w \displaystyle=0. (1d) where u and w are the perturbation horizontal and vertical velocities induced by the wind farm, respectilvey. The buoyancy perturbation is b=g\theta/\theta_{0} or b=-g\rho/\rho_{0} , where \theta and \rho denote potential temperature and density perturbations, respectively, and \theta_{0} and \rho_{0} are the corresponding reference values. The buoyancy frequency is N=\sqrt{-(g/\rho_{0})\,d\bar{\rho}/dz}=\sqrt{(g/\theta_{0})\,d\bar{\theta}/dz} , where the overbar denotes background quantities. The forcing f represents the horizontal force exerted by the wind farm (see Appendix A for more details), \tau is the perturbation Reynolds shear stress, and p is the modified perturbation pressure, including the pressure and the isotropic part of the Reynolds stress tensor (normal stresses). The pressure and turbulent stresses are scaled by \rho_{0} . We assume that ( 1 ) holds in both the ABL and the lower free atmosphere. The presence of wind farm leads to a displacement of the inversion layer denoted by \eta (shown schematically in figure 1 ). Considering small \eta , we approximate the ABL with a rectangular domain capped at z=H . However, we take the dynamical effects of this displacement into account leading to the

Read the complete text