A Lumped RC Equivalent Circuit Model of Head Tissues in sub-MHz Frequency Regimes
Angelo Faccia, \IEEEmembership Graduate Student Member, IEEE, Ermanno Citraro, \IEEEmembership Graduate Student Member, IEEE, and Francesco P. Andriulli, \IEEEmembership Fellow, IEEE · 2026
Read A Lumped RC Equivalent Circuit Model of Head Tissues in sub-MHz Frequency Regimes by Angelo Faccia, \IEEEmembership Graduate Student Member, IEEE, Ermanno Citraro, \IEEEmembership Graduate Student Member, IEEE, and Francesco P. Andriulli, \IEEEmembership Fellow, IEEE (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-29996.txt.
Introduction
Angelo Faccia, Ermanno Citraro, and Francesco P. Andriulli model head tissues as a lumped RC circuit. Full numerical simulation costs too much for rapid prototyping or live use, so their circuit mimics a three-layer head to fifty kilohertz. It carries frequency-dependent conductivity and permittivity in the electro-quasi-static regime, using few impedance elements for key signal paths. Tests with a dipolar brain source match semi-analytical scalp voltage peaks across skull thicknesses and eccentricities. Tissue dispersion and capacitive branches were weighed, both adding to fidelity.
Catalog record
| CREATOR | Angelo Faccia, \IEEEmembership Graduate Student Member, IEEE, Ermanno Citraro, \IEEEmembership Graduate Student Member, IEEE, and Francesco P. Andriulli, \IEEEmembership Fellow, IEEE |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36140 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.29996
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A Lumped RC Equivalent Circuit Model of Head Tissues in sub-MHz Frequency Regimes Angelo Faccia, \IEEEmembership Graduate Student Member, IEEE, Ermanno Citraro, \IEEEmembership Graduate Student Member, IEEE, and Francesco P. Andriulli, \IEEEmembership Fellow, IEEE Abstract Accurate modeling of electric potential and current distribution in head tissues is crucial for the design and evaluation of neuro-sensing and neuro-stimulation systems operating in the sub-megahertz frequency range. Numerical methods are widely employed in electromagnetic simulations, however their computational cost can limit their applicability to rapid prototyping, real-time simulations, and circuit-level integration. In this work, we introduce a lumped RC equivalent circuit model that reproduces the electrical behavior of a canonical three-layer spherical head geometry over a frequency range up to 50 kHz. The model accounts for frequency-dependent tissue conductivity and permittivity to capture dispersive effects, employing complex conductivity in the electro-quasi-static (EQS) regime. The circuit topology uses a minimal set of impedance elements in order to represent the essential mechanisms of electric signal propagation. Validation was performed using a dipolar brain source configuration for scalp voltage peak estimation, showing close agreement with semi-analytical solutions across different skull thicknesses and dipole eccentricities. In addition, the impact of tissue dispersion and displacement current inclusion on the model accuracy was quantitatively assessed, highlighting their contribution to the overall fidelity of the proposed approach. {IEEEkeywords} Lumped-parameter circuits, head modeling, bioelectromagnetics, frequency-dependent conductivity, capacitive effects, electro-quasi-static approximation, spherical harmonics, EEG forward modeling. † † footnotetext: The authors are with the Department of Electronics and Telecommunications (DET), Politecnico di Torino, 10129 Turin, Italy (e-mail: [email protected]; [email protected]; [email protected]). \IEEEpeerreviewmaketitle 1 Introduction \IEEEPARstart The Measurement of brain electrical activity through scalp electrodes, known as electroencephalography (EEG), provides a noninvasive means of monitoring neuronal activity with high temporal resolution [ 28 , 6 ] . Modeling the scalp potentials generated by neural sources, commonly represented as current dipoles [ 10 ] , is known as the EEG forward problem [ 18 ] . This modeling step is fundamental for solving the corresponding inverse problem, which aims to reconstruct the spatial distribution of neural activity from the measured scalp signals [ 17 ] . This procedure plays a crucial role in pre-surgical screening in drug-resistant epilepsy and real-time Brain-Computer Interface (BCI) systems [ 36 , 23 , 22 ] . Accurate representation of signal propagation in head tissues is not only important for EEG-related techniques but also for numerous biomedical applications, ranging from noninvasive sensing to targeted stimulation. It is increasingly relevant for understanding how biological tissues interact with electromagnetic fields over different frequency bands, ensuring both precision and safety across a wide range of applications [ 1 , 34 , 12 ] . These techniques encompass transcranial direct and alternating current stimulation (tDCS/tACS) in the sub-100 Hz range [ 29 ] , low-, high-, and ultra-high-frequency deep brain stimulation (LF/HF/UHF-DBS) protocols used in Parkinson’s disease treatment, which can work up to a few kilohertz [ 19 , 5 ] , and electrosurgical procedures that typically operate around 1 MHz [ 12 , 25 ] . The harmlessness and precision required for these applications highlight the need for head models capable of accurately describing current propagation over the frequency spectrum. Such broadband consistency requires an accurate representation of the frequency-dependent behavior of biological tissues as the operating frequency increases beyond the range of endogenous brain activity [ 37 , 15 ] . At the same time, the growing adoption of implantable and wearable biomedical electronic systems for real-time neuromodulation underscores the importance of compact equivalent-circuit models of the head, designed to reproduce the electrical behavior of head tissues with minimal computational cost [ 8 , 33 ] . The integration of these models into circuit-simulation environments would enable rapid design and testing, while their deployment in real-time controllers would support adaptive, closed-loop tuning of stimulation parameters. Numerical techniques such as the Finite Element Method (FEM), Finite Difference Method (FDM), and Boundary Element Method (BEM) [ 21 , 18 , 32 ] are commonly used to compute the electric field distribution within head tissues, as they can account for complex geometries and heterogeneous properties. However, their computational requirements may pose challenges for their direct integration within circuit simulation environments and real-time applications. Partial solutions have been explored with circuit-based formulations such as the Resistor Mesh Model (RMM), [ 14 , 7 ] , where the head volume is discretized into a network of resistors connecting spherical or cubic voxels. This approach models head behavior at low frequencies; however, because it relies on a fine volumetric discretization rather than a compact lumped equivalent circuit, it entails non-negligible computational demands and does not aim to reproduce the capacitive properties of biological tissues. Simplified equivalent-circuit models originate from the classical cell membrane theory and the Cole-Cole equation, which together laid the theoretical foundation for representing the electrical behavior of biological tissues [ 26 ] . Different studies have employed these formulations to characterize the electrical behavior of individual tissues [ 9 , 12 , 2 ] . In contrast, limited work has addressed the development of lumped element equivalent circuit representations of the entire human head that remain accurate over a broad frequency range, while accounting for tissue dispersion and displacement-current effects. Therefore, a solution that does not suffer from these limitations, combining compactness, circuit compatibility, and consistency with the frequency-dependent electrical behavior of biological tissues, is still desirable. In this work, we propose a lumped-element circuit model derived from the canonical three-layer spherical head geometry, representing the scalp, skull, and brain compartments. The model addresses the quasi-static volume-conduction problem linking internal current sources to peak scalp potentials, enabling application to both neural sensing and stimulation via the reciprocity theorem [ 38 ] , which provides a link between forward modeling and brain neuromodulation [ 13 , 11 ] . The circuit topology is composed of a compact set of impedance elements defined by the geometrical configuration and electrical properties of the tissue layers. As an added advantage over classical circuit representations, the proposed model not only includes explicit capacitive branches to account for displacement currents but also incorporates the frequency dispersion of both electrical conductivity and permittivity. The proposed circuit model was first validated against a semi-analytical reference formulation based on scalar spherical harmonics expansion by comparing the peak scalp potential generated by a radially oriented current dipole source [ 4 ] . Following validation, numerical analyses were performed to quantify the impact of displacement currents and frequency dispersion on circuit voltage estimation. The results indicated that these effects produce non-negligible variations in potential amplitude, thereby supporting the inclusion of frequency-dependent capacitive elements in the equivalent circuit model to ensure a physically consistent representation of current propagation in dispersive biological media. This paper is organized as follows. Section 2 presents background material and introduces the notation. Section 3 describes the proposed circuit equivalent model, detailing its architecture and parameter dependencies. Section 4 presents the validation of the proposed circuit model against the semi-analytical formulation and quantifies the errors introduced when neglecting capacitive or dispersive effects. Section 5 discusses the results and outlines future research directions. Figure 1: Three-layer spherical head model (with an additional infinite air layer) composed of scalp, skull, and brain compartments. A radial