Automated design of soft–rigid hybrid robots for dynamic locomotion

Hiroki Kobayashi, Yuki Takaha, Changyoung Yuhn, Yuki Sato, Sunao Tomita, Atsushi Kawamoto, Tsuyoshi Nomura · 2026

Read Automated design of soft–rigid hybrid robots for dynamic locomotion by Hiroki Kobayashi, Yuki Takaha, Changyoung Yuhn, Yuki Sato, Sunao Tomita, Atsushi Kawamoto, Tsuyoshi Nomura (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-29389.txt.

Introduction

Hiroki Kobayashi presents an auto design method for soft-rigid hybrid robots for walking. Rigid robots lack give for rough settings, while fully soft robots struggle with scale and loads. Taking a cue from nature, it tunes a soft-body shape, a stiff truss layout, and multi-channel drive. A sim couples a point method for soft bodies with position-based dynamics for truss elements, to search by gradient steps. The built design repeats the walking mode, which does not emerge without the skeleton.

Catalog record

CREATORHiroki Kobayashi, Yuki Takaha, Changyoung Yuhn, Yuki Sato, Sunao Tomita, Atsushi Kawamoto, Tsuyoshi Nomura
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE63947
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.29389

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Automated design of soft–rigid hybrid robots for dynamic locomotion Hiroki Kobayashi, Yuki Takaha, Changyoung Yuhn, Yuki Sato, Sunao Tomita, Atsushi Kawamoto, Tsuyoshi Nomura Abstract Rigid-bodied robots often lack compliance needed to adapt to unstructured environments, while fully soft robots, though highly adaptable, struggle with scalability and load capacity. In nature, musculoskeletal systems balance strength and flexibility by integrating hard and soft tissues. Inspired by this principle, we present an automated design method for soft–rigid hybrids that optimizes a freeform soft-body shape, a stiff truss layout, and multi-channel actuation. Our differentiable simulator couples the material point method (MPM) for deformable bodies with extended position-based dynamics (XPBD) for truss elements, enabling gradient-based search. The optimization generates truss skeletons that transmit actuation forces to the soft body. We fabricate the optimized design and evaluate it on a walking task. Experiments reproduce the walking mode predicted by the optimization, which does not emerge without the skeleton. Modal analysis further suggests that the skeleton enables deformation modes near the actuation frequency that promote effective stride generation. † † equal-contributors: Present address: Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, 153-8505, Tokyo, Japan Introduction Traditional robots have predominantly been built from rigid components such as metal links and motors. Such rigid mechanisms have offered great advantages in terms of precision and repeatability, enabling automation across a wide range of industrial tasks 38 . However, their mechanical rigidity often limits adaptability to uncertain or changing environments, and their operation in close proximity to humans often raises safety and interaction concerns 34 . In contrast, soft robots have attracted increasing attention as a new paradigm to achieve adaptive and safe interaction with the environment 21 ; 34 . Constructed from highly deformable and compliant materials, they can passively absorb unexpected contact and conform to complex or uncertain surroundings. Their continuous body deformation allows rich behaviors by relatively simple actuation or control inputs 21 . Despite these advantages, the inherent softness of such robots imposes several limitations on their mechanical performance 13 . Their compliant structures cannot generate or transmit large forces efficiently, making it difficult to perform high-load or high-precision tasks. In the biological world, organisms exhibit diverse structural strategies for locomotion and load bearing, ranging from fully soft-bodied organisms such as worms and jellyfish to musculoskeletal systems that integrate soft tissues with rigid skeletons 20 ; 1 . While biological structures at small scales can rely on compliant materials and distributed deformation, increasing body size imposes progressively greater mechanical stress due to the scaling of mass with volume 1 ; 28 . These observations suggest that combining compliant tissues with rigid load-bearing elements provides a scalable strategy for balancing flexibility and structural integrity. The promise of soft–rigid hybrid robotics lies in combining the compliance and adaptability of soft materials with the strength and load-bearing capability of rigid structures. Several hybrid designs have been developed in the context of robotic manipulators 50 ; 4 ; 31 ; 46 . For example, soft robotic fingers with rigid bones and tendon-driven actuation embedded in compliant bodies have been shown to improve load transmission compared with purely soft structures, while still retaining large deformation capability 4 . Beyond manipulation tasks, hybrid structures have also been explored in legged robots, where rigid segments are connected by compliant backbones to simplify control while maintaining structural integrity 47 . In addition, lattice-based hybrid structures have been proposed to locally modulate stiffness, enabling both locomotion and manipulation capabilities in elephant-inspired robots 15 . Several works have discussed design principles and strategies for constructing soft–rigid hybrid manipulators 10 ; 13 . These studies emphasize that the performance of hybrid systems depends critically on how rigid load-bearing elements and compliant regions are arranged, as they play distinct mechanical roles. Soft materials enable large, continuous deformation and can realize rich behaviors through distributed deformation modes, but their response is inherently high-dimensional and strongly dependent on geometry 34 . In contrast, skeletal structures can efficiently transmit forces over distance and provide structural support with relatively small mass, making the morphology of rigid elements a key factor in determining overall system behavior 40 ; 7 . Despite these insights, determining effective configurations of soft and rigid components remains challenging. In practice, the design of soft–rigid hybrid systems is often guided by biological inspiration 50 ; 4 ; 15 , which provides valuable insights into effective morphological design. However, translating such principles into concrete designs is not straightforward, and skeletal layouts and body geometries are typically specified manually and refined through iterative processes. This challenge becomes particularly pronounced in locomotion tasks 6 , as behavior emerges from interactions between the time-varying body state and the environment. Because these interactions are strongly coupled with the system dynamics, the resulting motion depends sensitively on the interplay between morphology and dynamics 32 , making it difficult to anticipate effective designs without systematic exploration. Computational approaches have emerged as a promising approach for the design of robotic morphologies and control strategies in complex settings. Early approaches combined rigid-body simulation and evolutionary algorithms to discover locomotion strategies through iterative exploration of body structures and control policies 39 . This line of research has been extended to more structured design spaces, such as voxel-based representations 8 ; 5 and variable geometry truss 14 . Recent advances in computational methods have broadened the range of design approaches, with emerging technologies leveraging machine learning 11 ; 44 ; 33 and differentiable physics 17 ; 12 ; 42 to enable gradient-based optimization in physics-involved design problems. In soft robotics, differentiable simulation has been applied to the design of soft body shape 35 ; 48 ; 9 ; 27 ; 24 ; 36 ; 45 ; 16 , actuator layout 48 ; 9 ; 27 ; 45 , and actuation control, including phase modulation 18 ; 12 ; 9 , frequency modulation 45 , and feedforward 48 or feedback controllers 36 , particularly in the context of locomotion tasks. Several of these designs have been physically fabricated and experimentally validated 27 ; 24 . Extensions toward soft–rigid design have also begun to emerge in differentiable simulation, for example through approaches that optimize the spatial distribution of soft, stiff, actuated, and void regions 9 . However, such approaches still face limitations in the explicit design of soft–rigid hybrid structures with skeletal or mechanism-like components. These limitations arise from both numerical and representational aspects. From a numerical perspective, under explicit time integration schemes, the range of material stiffness is often restricted by time-step constraints, making it difficult to realize the strong stiffness contrast expected between compliant bodies and effectively rigid structural elements. From a structural representation standpoint, continuous design representations pose challenges in depicting discrete structural features. Many existing approaches—either explicitly or implicitly—adopt concepts from topology optimization 3 , where structures are represented as continuous scalar fields. While this representation is well suited for describing deformable bodies, it is less natural for expressing sparse load paths, discrete connections, or mechanism-like force transmission. Although emerging studies have begun to explore such behaviors within continuum frameworks 37 , these approaches remain limited in capturing the structural characteristics of articulated or skeletal systems, particularly in dynamic settings. Here, we present a computational framework

Read the complete text