Bow-shock instability in entry, descent, and landing vehicles under high-enthalpy conditions
Adrián Antón-Álvarez 1,†, Adrián Lozano-Durán 1,2 · 2026
Read Bow-shock instability in entry, descent, and landing vehicles under high-enthalpy conditions by Adrián Antón-Álvarez 1,†, Adrián Lozano-Durán 1,2 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-28357.txt.
Introduction
Adrián Antón-Álvarez and Adrián Lozano-Durán show that the bow shock ahead of Mars-entry capsules can itself go unstable. Under high-enthalpy conditions, disturbances heat the vehicle wall as they amplify. Amplification runs in three steps: crossing the shock, growing in the post-shock shear layer, and corrugating the shock. No classical boundary-layer mode is needed, the gain reaches huge levels in a representative entry, and flight data from two Mars capsules match the result.
Catalog record
| CREATOR | Adrián Antón-Álvarez 1,†, Adrián Lozano-Durán 1,2 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 125670 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.28357
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Bow-shock instability in entry, descent, and landing vehicles under high-enthalpy conditions Adrián Antón-Álvarez 1,†, Adrián Lozano-Durán 1,2 Abstract Laminar–turbulent transition remains a major uncertainty in the aerothermal design of entry, descent, and landing (EDL) vehicles. We show that, under high-enthalpy Mars-entry conditions, the detached bow shock and the shock-generated shear–entropy layer can become unstable under freestream disturbances, leading to nonlinear breakdown and enhanced wall heating. The analysis is carried out at high altitude with freestream Mach numbers ( M ∞ M_{\infty} ) up to 30 for both Earth and Mars, with the latter being more susceptible to this instability. The freestream receptivity analysis shows that disturbance amplification occurs through a three-step mechanism: (i) transmission and amplification of acoustic and entropic freestream components across the bow shock; (ii) further convective amplification within the post-shock shear–entropy layer; and (iii) bow-shock corrugation driven by the downstream pressure field, which reinforces the instability. The dominant response is localized in the shock layer, and no classical boundary-layer mode is required to explain the disturbance amplification. The total optimal energy gain scales as G ¯ T opt ∼ γ 2 ∗ M ∞ 2 exp [ ( ρ 2 / ρ 1 ) / C − B / R e ∞ ] \overline{G}_{T}^{\rm opt}\sim\gamma_{2}^{*}M_{\infty}^{2}\exp[(\rho_{2}/\rho_{1})/C-B/\sqrt{Re_{\infty}}] , where γ 2 ∗ \gamma_{2}^{*} is an effective specific-heat ratio, ρ 1 \rho_{1} and ρ 2 \rho_{2} are the pre- and post-shock densities, R e ∞ Re_{\infty} is the freestream Reynolds number, and B B and C C are geometry-dependent constants. For a representative EDL vehicle during Mars entry, the resulting amplification factors are of order 10 6 10^{6} . We further show that flight measurements from the Mars Science Laboratory (MSL) and Mars 2020/Perseverance capsules ( 6 ; 8 ) are consistent with these results. The findings are also supported by wall-modeled large-eddy simulations of MSL under representative Mars-entry conditions. These results suggest that bow-shock instabilities may constitute a transition mechanism for blunt hypersonic entry vehicles, either as a standalone process or in combination with others. I Introduction Accurate prediction of laminar-to-turbulent boundary-layer transition remains a fundamental challenge in the design of hypersonic vehicles ( 39 ) . The state of the boundary layer directly governs key aerodynamic forces and thermal loads, which are critical for assessing the operational and survival margins of the vehicle. In the turbulent regime, boundary layers produce substantially higher skin friction and, more importantly, significantly increased aerodynamic heating compared to their laminar counterparts ( 44 ; 14 ) . These intensified thermal loads impose stringent requirements on the thermal protection system (TPS) design, affecting vehicle mass budgets, mission payload fractions, and structural durability. Inaccurate prediction of these forces and thermal loads can lead either to overly conservative designs with excessive weight penalties or to optimistic designs that are vulnerable to thermal failure. The Mars Science Laboratory (MSL) and Mars 2020/Perseverance entry, descent, and landing (EDL) missions exemplify these challenges, with reconstructed flight aeroheating data indicating transition and associated elevated heating during entry ( 6 ; 8 ; 1 ) . The transition characteristics of MSL were experimentally studied through campaigns spanning multiple hypersonic test facilities ( 13 ; 12 ; 14 ; 22 ) . Those ground-test data showed transition and turbulent-heating augmentation preferentially on the leeside of the capsule rather than on the windside. The associated leeside heat-flux augmentation became a critical consideration in sizing the TPS. During the actual MSL mission, post-flight heat-flux data were reconstructed, indicating elevated heating on the leeside consistent with transition ( 6 ) . Similar leeside heating behavior was subsequently documented for the Perseverance mission ( 8 ; 1 ) , suggesting a recurring trend for MSL-class Mars entry capsules and underscoring the importance of understanding the underlying mechanisms for future mission design. Drawing on the database of experimental measurements, 14 proposed an empirical criterion for smooth blunt-body transition onset based on the momentum-thickness Reynolds number, approximately Re_{\theta}\approx 200 . However, the numerical simulations used during the MSL design phase with the steady-state LAURA solver were generally restricted to operating in either fully laminar or fully turbulent mode ( 7 ; 43 ) . While these simulations successfully estimated the expected range of wall heating and reproduced observed transition locations when appropriately tuned, they lack inherent predictive capability regarding the physical mechanisms that trigger transition or the conditions governing its onset and location. This limitation represents a significant gap in the theory required for extrapolation to realistic flight conditions, which cannot be fully reproduced experimentally on Earth. The present work addresses the following question: in high-enthalpy hypersonic flow over blunt bodies, can freestream disturbances be amplified through interactions between the bow shock and the shear–entropy layer before conventional boundary-layer instabilities become dominant? I.1 Freestream receptivity Experimental evidence has long indicated that transition in high-speed regimes is strongly influenced by both the structure and intensity of freestream disturbances ( 21 ; 19 ) , making receptivity theory a central link between environmental disturbances and the onset of transition over hypersonic vehicles. Early theoretical investigations employed linear interaction analysis (LIA) to derive analytical scaling laws for infinitesimal disturbance amplification across normal and oblique shock waves. In the strong-shock limit, 28 showed that the pressure amplitude and the shock-normal wave-energy flux associated with transmitted acoustic/entropic perturbations scale as O(M_{\infty}^{2}) . For incident vortical disturbances, classical LIA predicts more modest amplification of the post-shock vortical (kinetic-energy-containing) fluctuations, with gains that depend on shock strength and incidence ( 35 ) . This qualitative picture is consistent with later numerical studies of shock/turbulence interaction ( 20 ) . A key implication of LIA is that, because the shock jump conditions couple thermodynamic and velocity perturbations, a single upstream Kovásznay mode (acoustic, vortical, or entropic) typically generates all three modes downstream, providing multiple pathways for post-shock base-flow excitation. Once disturbances are transmitted and amplified across the bow shock, receptivity studies have shown that coupling between Mack modes and slow acoustic perturbations often dominates the receptivity process in canonical high-speed boundary layers on flat plates, wedges, and slender bodies. 9 and 10 applied the Kovásznay decomposition to analyze post-shock disturbance fields and demonstrated that slow acoustic modes can synchronize with Mack’s second mode, i.e., a resonance-like matching of phase speeds that enables sustained forcing of the instability by the slow acoustic wave. This synchronization facilitates efficient energy transfer from freestream disturbances to modal instabilities. 23 ; 24 extended receptivity theory by identifying intermediate modes that bridge freestream acoustic forcing and boundary-layer instabilities. Although these modes are stable, they are excited preferentially and subsequently transfer energy to the unstable second mode via slow-acoustic synchronization, enabled by phase-speed matching and spatial overlap. In this view, the shock does more than amplify incoming disturbances: it organizes the post-shock disturbance field in a way that promotes efficient coupling into the dominant instability waves. Building on this perspective, 34 uncovered a continuous resonance process in which slow acoustic modes repeatedly reflect between the shock and the wall, leading to a persistent excitation mechanism that is intrinsic to shock-bounded flows and has no analogue in shock-free configurations. Motivated by these observations, more recent work has sought to capture the global interaction of shock transmission, reflection, and instability