Efficient dispersal of submicron solid particles for stratospheric aerosol injection

Yair Segev, Eitan Y. Levine, Yair Bar-Yoseph, Ori Amsallem, Yuval Dagan, Elad Laor, Shai Rahamim, Alon Luski, Eran Daniel, Eshani Hettiarachchi, Amyad Spector · 2026

Read Efficient dispersal of submicron solid particles for stratospheric aerosol injection by Yair Segev, Eitan Y. Levine, Yair Bar-Yoseph, Ori Amsallem, Yuval Dagan, Elad Laor, Shai Rahamim, Alon Luski, Eran Daniel, Eshani Hettiarachchi, Amyad Spector (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-27414.txt.

Introduction

Yair Segev and colleagues show pneumatic spread of solid particles for stratospheric aerosol injection. A water-repelling coat lifts the submicron share from 10 percent untreated to between 50 and 85 percent treated, with 300 nanometer grains beating 500 nanometer ones. Roughness data from atomic force microscopy predicts which types disperse best, and a feasible aircraft fleet could sustain a climate-relevant layer.

Catalog record

CREATORYair Segev, Eitan Y. Levine, Yair Bar-Yoseph, Ori Amsallem, Yuval Dagan, Elad Laor, Shai Rahamim, Alon Luski, Eran Daniel, Eshani Hettiarachchi, Amyad Spector
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE49286
LICENSEhttp://creativecommons.org/licenses/by-sa/4.0/
RIGHTSCC BY SA
SOURCEarXiv

Source: https://arxiv.org/abs/2605.27414

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Efficient dispersal of submicron solid particles for stratospheric aerosol injection Yair Segev, Eitan Y. Levine, Yair Bar-Yoseph, Ori Amsallem, Yuval Dagan, Elad Laor, Shai Rahamim, Alon Luski, Eran Daniel, Eshani Hettiarachchi, Amyad Spector Abstract Stratospheric aerosol injection (SAI) using solid particles has been proposed as an alternative to sulfate aerosols for solar radiation modification, but practical deployment faces challenges in efficiently deagglomerating and dispersing powders as submicron particles. Here we experimentally demonstrate pneumatic dispersal of particles in optically optimal size ranges for SAI. Using spherical amorphous silica particles, we find that applying a hydrophobic surface treatment substantially improves dispersibility, with 50-85% of treated particle mass achieving submicron sizes compared to 10% for untreated particles. We compare the dispersal of treated particles of different sizes and find that 300 nm particles provide superior deagglomeration than 500 nm particles for the same air consumption. Theoretical modeling of the adhesion forces between particles, combined with surface roughness parameters extracted from atomic force microscopy, successfully predicted the relative dispersibility across different particle types. The pneumatic dispersal system achieved optimal performance at air-to-powder mass ratios of about 10:1. Using the measured dispersed particle sizes, we provide a scaling analysis suggesting that a feasibly sized fleet of dispersal aircraft could provide an aerosol layer sufficient for meaningful climate intervention. These results demonstrate that hydrophobic surface treatment and pneumatic dispersal can overcome the agglomeration challenge for SAI with solid particles. 1 Introduction The ongoing rise in global temperatures and the associated extreme weather events motivate the search for climate intervention options to mitigate the worst effects of climate change and buy time for decarbonization and adaptation. Stratospheric aerosol injection (SAI), the concept of dispersing a layer of particles to reflect a portion of the sun’s light [ 5 , 9 , 15 , 6 ] , has attracted increasing interest, as the plausibility of achieving substantial cooling is supported by observations following large volcanic eruptions, which enhance the Junge layer of reflective, submicron-sized sulfate aerosols [ 28 , 34 ] . Many studies have focused on identifying and bounding various risks and uncertainties associated with SAI, including “side-effects” on the ozone layer, precipitation patterns and cloud formation [ 42 , 12 , 46 ] . However, global-scale geoengineering also involves practical challenges, such as the prerequisite technology, manufacturing and logistic capacities to disperse an estimated millions of tons per year of submicron particles into the lower stratosphere to achieve a significant global average cooling impact of the order of a few watts per square meter [ 27 , 38 ] . Inspired by volcanoes, a large number of studies have discussed the option of deploying sulfate aerosols for SAI. Several recent papers have studied the practicality of sulfate deployment, including the possibility of introducing \text{SO}_{\text{2}} instead of directly deploying an aerosolized sulfate solution or sulfuric acid [ 4 , 37 ] . These techniques assume subsequent natural conversion into sulfate droplets, and growth of aerosols via condensation or coagulation to optically effective sizes. However, sulfate aerosols are known to have several unfavorable properties, including significant absorption in the atmospheric longwave window [ 46 ] , heterogeneous reactivity with stratospheric nitrogen oxide reservoirs [ 17 , 35 ] , and impacts on precipitation acidity [ 43 ] . These drawbacks have motivated a growing number of proposals for alternative materials for SAI, largely based on minerals, e.g. titania, alumina, calcite, silica or diamonds [ 41 , 31 , 44 , 19 , 11 , 40 ] . Using alternative materials opens the door to selecting or tailoring preferable optical and chemical properties, while possibly harnessing existing manufacturing capabilities for several such materials. Such solid particles would also need to be dispersed with typical sizes of several hundreds of nanometers to efficiently scatter visible light and maintain a significant gravitational lifetime in the lower stratosphere [ 18 ] . However, dispersal of submicron solid particles is challenging due to the dominance of adhesive forces over inertia at these scales. Based on this understanding and a quantitative analysis, a recent paper [ 16 ] predicted that practical dispersal systems for proposed mineral aerosols could produce prohibitively inefficient distributions of agglomerates. These larger particles have poor optical scattering efficiencies, necessitating far greater injected quantities than would nominally be needed for optimally-sized particles. For a desired cooling effect, a higher mass requirement could directly result in increased side effects related to increased total aerosol volume ( e.g. , heating from infrared absorption leading to impacts on atmospheric dynamics and composition), surface area ( e.g. , heterogeneous reactions with stratospheric trace gases leading to ozone depletion), and particle number concentrations ( e.g. , enhanced nucleation of cirrus clouds from settling particles), as well as larger costs and burdens on manufacturing capacities, supply chains and the deployment fleet. For substantially non-optimal sizes (on the order of several microns), infrared absorption will surpass shortwave scattering, and the net cooling effect of most particles will become negative [ 23 ] . Although several aerosol systems have demonstrated dispersal of submicron mineral particles [ 45 ] , the few reported attempts to disperse candidate SAI materials in lab settings have generally confirmed the difficulties of achieving optically efficient particle size distributions (PSD) [ 30 ] . Here we present the efficient dispersal of solid, submicron particles designed for SAI research. Our experimental dispersal method comprises pneumatic eductors, which use pressurized air to convey and deagglomerate fine powders. Several powder samples were tested, with substantial improvements in dispersibility resulting from the application of a hydrophobic surface treatment to the particles. Employing a combination of optical spectrometry and laser diffraction imaging instruments, we measure high mass fractions of particles dispersed in desired size ranges which are near optimal for scattering sunlight. Analysis of the air consumption required for effective dispersal suggests that this pneumatic dispersal method is scalable within the practical constraints of aircraft, and may thus be an enabling building block for SAI technology. While all powders studied here were based on spherical amorphous silica particles, our findings are generally applicable for engineered solid particles with similarly narrow grain size distributions and non-polar surfaces. 2 Methods 2.1 Materials All particle samples used in this study were amorphous silica spheres. Amorphous silica has recently been proposed as a building block for SAI particles [ 22 ] due to its established safety [ 36 ] , relative chemical inertness, including towards stratospheric gases [ 25 ] , and existing large-scale manufacturing infrastructure [ 21 ] . The spheres (“monomers”) were fabricated using a Stöber sol-gel method [ 39 ] , a widely tunable mass-production process. For our purposes, the spheres were produced with target diameters of 300 or 500 nm, denoted with the prefix D300 or D500, respectively, as this size range is the most efficient in scattering sunlight. Typical diameter spreads of 10-15% (one standard deviation) were measured using scanning electron microscopy (SEM). Based on SEM images and dynamic light scattering (DLS) measurements, the mass fraction of ultra-fine particles, i.e. with diameters smaller than 100 nm, was less than 0.1%. Untreated particles, denoted with the suffix U, were strongly hydrophilic due to dense coverage by hydroxyl (OH) groups typical of silica surfaces, as confirmed by atomic force microscopy-photothermal infrared

Read the complete text