Model discovery for dynamical systems with complex-valued product units
Martin Brückmann, Babette Dellen, Uwe Jaekel · 2026
Read Model discovery for dynamical systems with complex-valued product units by Martin Brückmann, Babette Dellen, Uwe Jaekel (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-27158.txt.
Introduction
Brückmann and two co-authors learn the rules that drive a system from its observed paths, rather than just forecasting its next states. Each unit in their network stands for a complex monomial, and the output is a sparse mix of such terms. The terms, with fractional or negative powers, are learned from data, so no preset list of candidate functions is needed. The method recovers the exact rules for four chaotic test systems in most trials, and it gives stable paths for real human gait signals.
Catalog record
| CREATOR | Martin Brückmann, Babette Dellen, Uwe Jaekel |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 45075 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.27158
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Model discovery for dynamical systems with complex-valued product units Martin Brückmann, Babette Dellen, Uwe Jaekel Abstract Discovering the governing equations of a dynamical system from observed trajectories provides deeper insight into its structure than mere prediction of future states. We present a data-driven approach to model discovery based on complex-valued product-unit networks, in which each unit represents a complex monomial and the network output is a sparse linear combination of such monomials. In contrast to established library-based methods such as SINDy, our approach does not require a predefined set of candidate functions: the relevant monomials, including those with fractional or negative exponents, are learned directly from data. Across four chaotic benchmark systems (Lorenz63, Lorenz84, the Four-Wing attractor, and a fractional variant of Lorenz63), we recover the exact governing equations in 90% of trials for the first three systems, and in 70–90% of trials for the fractional case, using at least 3000 training points. Applied to real-world human-gait accelerometer signals, the model produced stable trajectories with bounded prediction errors, corresponding to an RMSE of approximately 12-14% of the signal amplitude range over a test horizon three times longer than the training interval, demonstrating its potential for high-dimensional systems in which analytic equations are unavailable. 1 Introduction It is well known that highly complex patterns and even chaos in dynamical systems can emerge from comparatively simple governing equations. For example, the chaotic dynamics of the Lorenz attractor [ 18 , 2 ] , originally serving as a model for weather phenomena, arises from three sparse nonlinear polynomial equations, consisting of monomials that couple the main variables of the system by multiplication. The recovery of the accurate algebraic structure of the leading monomials driving the dynamical system is highly valuable for gaining a better understanding of the properties of the system, such as dynamic stability and interaction of variables, as well as further theoretical insights. Examples of real-world data originating from dynamical systems are physiological time series, such as human-gait accelerometer data, or EEG [ 15 ] and ECG [ 20 ] data, but also machine vibrations in predictive maintenance [ 21 ] . A major challenge in identifying the relevant monomials, or more generally terms with fractional or negative exponents, for high-dimensional systems is the vast, potentially infinite, number of candidate terms to be explored. Since this number grows exponentially with the input dimension, exhaustive search quickly becomes intractable. In recent years, several neural-network-based approaches have been proposed to learn sparse polynomial representations from data that have shown promising results. First-order input couplings were implemented for a reservoir-computing approach applied to the problem of forecasting the behavior of the Lorenz system [ 12 ] . Higher-order couplings have also been used in the SINDy approach to model nonlinear dynamical systems [ 3 ] . Using a preset candidate library of monomials, the active candidates are determined using sparse regression. Wang and Li (2024) have recently proposed the dynamical-system deep-learning (DSDL) model to predict chaotic time series, which is based on a state-space reconstruction (SSR) technique and can, unlike many traditional deep-learning approaches, also infer important variables and high-degree interactions of the system [ 29 ] . Their architecture was shown to be effective with noisy data [ 31 ] and also delivered promising results for partial differential equations [ 17 ] . Another notable approach is symbolic regression, which aims to find short mathematical expressions that describe the underlying data, typically making use of genetic programming or the usually faster FFX algorithm. The latter utilizes a large candidate set of combinations of nonlinear functions to subsequently collect Pareto optimal expressions that trade off error and the number of terms in the representation [ 19 , 24 ] . Figure 1: General approach for systems following differential equations: We assume knowledge of a time series of training trajectories in phase space, consisting of points and the numerical values of their time derivatives. If values for the derivatives are not directly available, we assume that they can be approximated numerically. The data are assumed to be subject to a system of ordinary differential equations. By comparing evaluations of the true equations at these points with derivatives obtained from the model, the product-unit model fits the inputs to linear combinations of monomials to approximate the original equations, i.e., we learn the right-hand side (RHS) of equations \dot{x}_{j} . Furthermore, the derived equations permit prediction of future system states. The stability of trajectories generated from the model’s equations can be assessed using the effective prediction time (EPT), which indicates the point at which the predicted trajectory diverges from the true trajectory. However, these approaches are limited because of their use of predefined candidate functions or monomials, restricting the number of nonlinear function classes that can be represented by the model, which is particularly severe for high-dimensional problems. Therefore, we follow a different approach. Product units are neural network units that can be trained to take the form of any monomial or even algebraic terms containing fractional or negative exponents [ 10 , 16 , 11 , 9 ] , but which can be difficult to train. Recently, it could be shown that complex-valued product unit networks can successfully learn sparse approximations of real-valued functions from real data and outperform classical multi-layer perceptrons in extrapolation tasks [ 8 ] . The complex-valued product-unit network operates fully in the complex domain, meaning that its inputs, outputs, and weights are complex-valued, which distinguishes it from previous approaches. Training of this network could be achieved by standard gradient descent using a loss defined for complex-valued outputs. In this work, we use complex-valued product unit networks to learn the governing equations of dynamical systems directly from observed trajectories of the system. Here, we focus on dynamical systems with a moderate, but unknown number of multiplicative couplings of fractional power laws in the dynamical variables. Note that this includes the possibility of approximating other non-linear couplings in terms of Taylor- or Laurent expansions. A major challenge in the identification of the dominant monomial terms lies in the large number of possible couplings, which grows exponentially with the number of variables. Since the required leading terms of the sparse polynomial as well as potentially fractional exponents in our approach are learned from the data directly without using a candidate library, the problem of complexity-of-choice is avoided. To determine its aptitude in extracting the governing equations of a dynamical system from state trajectories, the proposed method is tested on some standard benchmark problems, i.e., the Lorenz63 attractor, Lorenz84 and a Four Wing system. Furthermore, a modified instance of Lorenz63 is investigated, which now includes a fractional exponent in the third equation. We finally apply the product-unit model to real-world human-gait patterns in order to learn a mathematical representation of human gait. 2 Methods This section introduces the complex-valued product-unit model, the benchmark dynamical systems used for evaluation, and evaluation measures. A general overview of the approach can be seen in Fig. 1 : The model is trained on a set of simulated trajectories (discrete points and their derivatives) to learn the precise terms of the underlying differential equations. Subsequently, the identified equations and the stability of their predictions over time are assessed. 2.1 Complex-Valued