Antisymmetric spontaneous resistivity anisotropy due to hard-axis collapse in polycrystalline Co thin films

Y. Fernandes, J. Geshev, A. M. H. de Andrade, A. D. C. Viegas · 2026

Read Antisymmetric spontaneous resistivity anisotropy due to hard-axis collapse in polycrystalline Co thin films by Y. Fernandes, J. Geshev, A. M. H. de Andrade, A. D. C. Viegas (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-27099.txt.

Introduction

Fernandes and three co-authors study effects linked to magnetization hard-axis collapse in polycrystalline cobalt thin films. For certain field angles, the system shows distinct lasting resistance levels in lengthwise and transverse signals. The planar Hall resistance holds multiple stable, steady levels at room temperature, marking at least three lasting states usable for information storage. The levels stem from non-uniform magnetic patterns left after field removal, pointing to a simple low-cost platform for spintronic memory and sensing.

Catalog record

CREATORY. Fernandes, J. Geshev, A. M. H. de Andrade, A. D. C. Viegas
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE21898
LICENSEhttp://creativecommons.org/publicdomain/zero/1.0/
RIGHTSCC0
SOURCEarXiv

Source: https://arxiv.org/abs/2605.27099

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Antisymmetric spontaneous resistivity anisotropy due to hard-axis collapse in polycrystalline Co thin films Y. Fernandes, J. Geshev, A. M. H. de Andrade, A. D. C. Viegas Abstract We investigate magnetoresistance phenomena associated with the magnetization hard-axis collapse in polycrystalline Co thin films. Transport measurements reveal that, for specific orientations of the applied magnetic field, the system exhibits distinct remanent resistance levels in both the in-plane longitudinal and transverse voltage responses. In particular, the planar Hall resistance shows multiple stable and reproducible levels at room temperature, enabling the identification of at least three remanent states that can be distinguished and used for information storage. These resistance levels originate from non-uniform magnetic configurations stabilized after the application and removal of the external magnetic field in the hard-axis region. Since this phenomenon remains largely unexplored, we present an incipient study addressing its potential implications from an applied-physics perspective. The observation of such behavior in polycrystalline Co thin films grown on Si substrates suggests a simple and low-cost platform for spintronic memory and sensing devices based on the remanent planar Hall effect. I Introduction The increasing demand for higher-density and multifunctional data storage technologies has stimulated the search for alternative mechanisms for information encoding beyond conventional schemes. In this context, multi-level magnetic memory devices have attracted considerable attention, as they enable the storage of more than one bit per cell and therefore enhance information density without scaling down device dimensions. Magnetotransport phenomena in thin films are particularly well suited for implementing such functionalities due to their compatibility with planar device architectures and electrical readout schemes, which are directly compatible with complementary metal–oxide–semiconductor (CMOS) technology platforms that underpin modern integrated circuits. Within this framework, the planar Hall effect (PHE), which arises from the anisotropic magnetoresistance (AMR) McGuire-1975 in ferromagnetic (FM) materials, is particularly sensitive to the orientation of the magnetization ( \mathbf{M} ) with respect to the electric current. This sensitivity enables the electrical detection of distinct magnetic configurations, making it suitable for memory applications. A remarkable phenomenon observed in thin films with in-plane uniaxial magnetic anisotropy is the so-called hard-axis collapse (HAC) Idigoras-2011 ; Idigoras-2014 , in which the remanent magnetic state (acheived after the application of a saturating external magnetic field H_{\mathrm{sat}} and its subsequent reduction to zero) in the vicinity of the film magnetization hard axis (HA), deviates significantly from that predicted by the coherent rotation model Becker-1930 ; SW . This phenomenon is characterized by a behavior observed as \alpha , the angle between \mathbf{H} and the nominal easy axis (EA), approaches 90^{\circ} , where prominent peaks appear in the remanent magnetization, M_{\mathrm{rem}} . As a result, the system stabilizes in multiple remanent magnetic configurations rather than in a single state, often associated with non-uniform magnetization distributions that give rise to measurable changes in the electrical resistance Fernandes-2026 ; Fernandes-2026-2 . Building on this scenario, we demonstrate that HAC in polycrystalline Co thin films can induce at least three stable and distinguishable resistance levels. These states originate from underlying non-uniform magnetic configurations and can be reproducibly accessed through magnetic-field protocols. Notably, polycrystalline Co was chosen due to its low cost and ease of deposition, in contrast to more complex material systems typically employed in integrated circuits. These results may open avenues for potential applications in magnetic memory and sensing devices based on simple FM thin films. II Experiment II.1 Sample Growth It has been reported that HAC emerges in systems exhibiting a certain degree of dispersion in the magnetic anisotropy axes Idigoras-2011 , for which polycrystallinity plays a key role. To satisfy this requirement, three polycrystalline 20-nm-thick Co films were grown at room temperature onto naturally oxidized Si(100) substrates with lateral dimensions of approximately 1\,\text{cm} \,\times\, 1\,\text{cm} in the presence of an in-plane magnetic field of 2 kOe , applied to induce uniaxial magnetic anisotropy. The films were deposited by dc magnetron sputtering using an AJA ATC Orion-8 system in a confocal configuration, with the substrate holder rotating at 40 rpm , a 5.8 inches target-to-substrate distance, and a base pressure below 2\times 10^{-8} Torr prior to deposition. All targets had a purity exceeding 99.95%. The resulting stacks are Si/SiO 2 //Ta(18 nm)/Co(20 nm)/Ta(3 nm) , Si/SiO 2 //TiO 2 (20 nm)/Ta(18 nm)/Co(20 nm)/Ta(3 nm) and Si/SiO 2 //Al 2 O 3 (20 nm)/Ta(18 nm)/Co(20 nm)/ Ta(3 nm), referred to as samples A, B, and C, respectively. The Al 2 O 3 and TiO 2 layers were grown by atomic layer deposition at a reactor temperature of 300 ∘ C in a Beneq TFS200 system. In these films, the oxide layers were introduced to slightly modify the crystallinity of the Co layer, thereby providing films with different degrees of crystalline order. Figure 1 shows the structural characterization of the films, performed by x-ray diffraction using a Bruker D8 Advance diffractometer in Bragg–Brentano \theta – 2\theta geometry with Cu K_{\alpha} radiation. The diffraction patterns exhibit an overlap between the Co fcc (111) and Co hcp (002) peaks. Well-defined peaks associated with the oxide layers are also observed, nearly overlapping. In particular, the Co crystallinity is enhanced in the film grown on the Al 2 O 3 /Ta bilayer, compared to those grown on TiO 2 /Ta and on Ta without an oxide underlayer. II.2 Magnetization and transport measurements Figure 1: Room-temperature x-ray diffraction patterns in the vicinity of the Ta(200) peak and the Co fcc (111) and hcp (002) reflections for the three samples deposited under an in-plane magnetic field. An offset was applied to the B and C curves for clarity. After structural characterization, in-plane magnetization curves, M(H) , were recorded at room temperature using an EZ9 MicroSense vibrating sample magnetometer operating in vector magnetometry mode, in which the components of the spontaneous magnetization ( \rm\bf M_{S} ) parallel and transverse to the direction of {\rm\bf H} are measured simultaneously. From the measured HA major magnetization hysteresis loops, the anisotropy field was estimated to be approximately 42 Oe , 30 Oe , and 40 Oe for samples A, B, and C, respectively. Electrical resistance measurements were carried out at room temperature using a four-point collinear probe method in a Hall cross geometry, with a constant in-plane DC current of 10 mA . The Ag-coated probes were equally spaced by approximately 1 mm and brought into contact with the Ta capping layer of the samples. Prior to each measurement, an in-plane H_{\mathrm{sat}} of 500 Oe was applied at an angle \alpha for 1 s . Since an electromagnet was used, to ensure that the films were in a remanent state, the field was first reduced to approximately 1 Oe and then decreased stepwise to near zero, at which point the resistance measurement was performed. The experimental setup included a Keithley 6221 AC/DC current source, a Keithley 2182A nanovoltmeter, and a Lake Shore 455 digital signal processing gaussmeter. Figure 2: Illustration of the studied systems. A Cartesian coordinate system is used, with the \mathrm{x} -axis defined along the in-plane current density \mathbf{j} , which is oriented at an angle \phi_{j} with respect to the EA. The magnetization field \mathbf{M}(\mathrm{x,y}) forms an angle \theta_{M} relative to \mathbf{j} . The voltages V_{\mathrm{xx}} and V_{\mathrm{xy}} are measured along \mathbf{j} and transverse to it in the \mathrm{xy}

Read the complete text