Ultra-Low-Noise Brillouin Hybrid Synthetic Laser for Sub-Hertz Lattice Clock Spectroscopy

Meiting Song, Stefan Lannig, Dahyeon Lee, Lingfeng Yan, Andrei Isichenko, Nick Montifiore, Nitesh Chauhan, Max N. Frankel, Yu Hyun Lee, Shraddha Agrawal, Jun Ye, Daniel J. Blumenthal · 2026

Read Ultra-Low-Noise Brillouin Hybrid Synthetic Laser for Sub-Hertz Lattice Clock Spectroscopy by Meiting Song, Stefan Lannig, Dahyeon Lee, Lingfeng Yan, Andrei Isichenko, Nick Montifiore, Nitesh Chauhan, Max N. Frankel, Yu Hyun Lee, Shraddha Agrawal, Jun Ye, Daniel J. Blumenthal (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-26708.txt.

Introduction

Meiting Song and eleven others demonstrate a hybrid laser that steadies light for atomic clocks and quantum tools. Fast state control exposes noise at high offset frequencies that cavity locks alone cannot tame, while miniaturization also matters. Their design pairs a cryogenic silicon cavity's stability with an integrated Brillouin laser's high-frequency quieting. Noise falls across more than seven decades. It reaches sub-hertz linewidth, confirmed by sub-hertz spectroscopy on a strontium lattice clock, with record-low noise at 698 nanometers.

Catalog record

CREATORMeiting Song, Stefan Lannig, Dahyeon Lee, Lingfeng Yan, Andrei Isichenko, Nick Montifiore, Nitesh Chauhan, Max N. Frankel, Yu Hyun Lee, Shraddha Agrawal, Jun Ye, Daniel J. Blumenthal
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE30456
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.26708

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ultra-Low-Noise Brillouin Hybrid Synthetic Laser for Sub-Hertz Lattice Clock Spectroscopy Meiting Song, Stefan Lannig, Dahyeon Lee, Lingfeng Yan, Andrei Isichenko, Nick Montifiore, Nitesh Chauhan, Max N. Frankel, Yu Hyun Lee, Shraddha Agrawal, Jun Ye, Daniel J. Blumenthal Abstract Frequency-stable lasers enable high-fidelity quantum state manipulation, which forms the basis of optical atomic clocks, quantum sensing, and quantum computation. Performing state manipulations at increasingly high speeds requires attention to laser frequency noise at high Fourier (carrier-offset) frequencies that cannot be addressed by traditional cavity stabilization alone. Scalable operations also benefit from device miniaturization. Here, we demonstrate a hybrid laser stabilization approach that combines ultrahigh frequency stability of a cryogenic silicon cavity with high-Fourier-frequency noise suppression of an integrated Brillouin laser. The combined system suppresses frequency noise over a Fourier span of more than 7 decades, yielding a < < 1 Hz phase-integrated linewidth and 0.2 Hz 2 /Hz frequency noise at Fourier frequencies above 10 MHz. The performance of this hybrid laser is confirmed by sub-Hz Rabi spectroscopy with a three-dimensional 87 {}^{\text{87}} Sr lattice clock. This work demonstrates record-low frequency noise at 698 nm over an extensive Fourier frequency range and highlights the promise of precision clock spectroscopy using a chip-scale integrated laser technology. 1 Introduction Frequency-stabilized lasers based on high-finesse cavities are a foundational component in optical atomic clocks 29 ; 30 ; 40 , quantum information processing 19 ; 10 ; 5 , and gravitational wave detection 1 ; 18 ; 31 . Continued advances in cavity engineering over the last few decades have firmly established cavity-stabilized lasers as the gold standard for long term spectral purity, with cryogenic silicon (Si) cavities representing the state-of-the-art 20 . However, conventional cavity stabilization cannot effectively suppress laser frequency noise above 10 MHz due to the finite response of frequency modulators, with feedback bandwidth limited to < 1 MHz and feedforward extending suppression to 10 MHz 2 ; 22 ; 6 ; 11 . Such high Fourier frequency noise has become increasingly important as quantum computation and sensing speeds and the rate of qubit manipulations are increased. In parallel with the development of cavity-stabilized lasers, several photonic integrated stabilized lasers, most notably integrated silicon nitride (Si 3 N 4 ) Brillouin lasers 24 ; 34 , have shown frequency noise suppression at high Fourier frequencies well beyond the reach of electronic feedback. This approach achieves broadband suppression of fast pump laser frequency noise (typically > 10 kHz) with stimulated Brillouin scattering (SBS) 9 ; 21 ; 3 ; 41 ; 28 through the wide Brillouin gain bandwidth, long effective Brillouin grating lengths, and highly nonlinear parametric gain 25 ; 35 . While the Brillouin process is effective at suppressing the high-Fourier-frequency noise, low- to mid-Fourier frequency noise is limited by thermorefractive noise (TRN) and other sources such as photothermal noise in the laser cavity. Therefore, hybrid laser strategies are needed to mitigate noise over large low- to high-Fourier-frequency ranges 23 ; 14 ; 36 . This frequency noise landscape motivates a hybrid strategy that combines SBS-based high-Fourier-frequency noise suppression with precision cavity stabilization. Here, we report a hybrid synthetic laser that combines a photonic-chip-based, self-isolating 65-cm-long 698 nm Brillouin resonator with a state-of-the-art cryogenic Si cavity, as schematically depicted in Fig. 1 . This design enables engineering of the frequency noise over a Fourier span of more than 7 decades, simultaneously achieving a sub-Hz phase-integrated linewidth and a frequency noise power spectral density of 0.2 Hz 2 /Hz at Fourier frequencies above 10 MHz. The resulting linewidth and frequency noise are validated using in-loop error signal analysis and sub-Hz Rabi spectroscopy on the clock transition in a three-dimensional 87 Sr optical lattice clock. This level of multi-decade broadband frequency noise suppression and enhanced stability unlocks the potential of low-noise lasers to advance high-speed gate operations for quantum computing and sensing. Figure 1: Illustration of the hybrid synthetic laser. A 1542 nm laser is stabilized to the cryogenic Si cavity and the stability is transferred to 698 nm through a frequency comb. An integrated Si 3 N 4 photonic chip pumped at 698 nm generates the Brillouin laser. Two schematic plots illustrate the hybrid laser frequency noise, highlighting noise suppression at different stages (see Fig. 4 ), and Rabi spectroscopy of 87 Sr atoms trapped in a three-dimensional lattice (see Fig. 5 ). The zoomed-in waveguide section depicts the Brillouin scattering process, in which a pump photon (light red sphere and purple arrow) generates an acoustic phonon (green) and a back-scattered Stokes photon (darker red sphere and blue arrow). The SBS laser is phase-locked to the Si-cavity-stabilized laser using an optical phase-locked loop, and the synthetic laser output is delivered to a 87 Sr three-dimensional optical lattice clock for Rabi spectroscopy measurements. Components are not drawn to scale. 2 Components, Integration, and System Characterization The hybrid synthetic laser combines a cryogenic Si reference cavity with an integrated Brillouin laser based on a low-loss, high-Q Si 3 N 4 resonator. The system schematic in Fig. 2 depicts the two-stage laser stabilization. For low- to mid-Fourier-frequency noise suppression and stabilization synthesis, a 1542 nm laser is referenced to the cryogenic Si cavity. Its stability is transferred via an optical frequency comb to a 698 nm laser referenced to an ultra-low-expansion (ULE) cavity 39 , hereafter referred to as the “clock laser”. The Brillouin laser that suppresses high-Fourier-frequency noise is subsequently phase-locked to the clock laser, forming the hybrid synthetic laser that inherits the low-noise performance of both subsystems. Figure 2: System schematic of the hybrid synthetic laser. a The pump laser (purple) is locked to the on-chip Brillouin cavity using a Pound–Drever–Hall loop. An integrated filter ring routes the backscattered Brillouin signal (blue) to the drop port. b The clock laser (orange) is a ULE-cavity-stabilized laser locked to a Si-cavity referenced laser through an optical comb. c The Brillouin laser is subsequently stabilized to the clock laser using an optical phase-locked loop to form the hybrid synthetic laser (red). The high-Fourier-frequency noise suppression in the Brillouin laser arises from phonon-mediated interactions between long-lived intra-cavity pump photons and rapidly decaying acoustic modes, enhanced by the large nonlinear interaction length of the ultra-high-Q coil resonator. This mechanism attenuates pump noise at bandwidths well beyond those accessible to conventional electronic feedback. In contrast to other integrated Brillouin laser designs that utilize phase matched phonon and photon guiding, the unguided free-space-like rapidly decaying acoustic waves provide a large Brillouin gain bandwidth (hundreds of MHz) and remove the propagation delay phase matching requirement between acoustic and optical modes 13 enabling integrated Brillouin lasers from the visible to the shortwave infrared. The Si 3 N 4 Brillouin coil resonator has a cavity length of 65 cm and is co-integrated with an first-order Stokes (S1) add-drop filter that provides Stokes output separation from the pump (Fig. 3 a). The 698-nm pump laser is locked to the integrated resonator (see Fig. 2 a and Methods for details). This design yields an on-chip lasing threshold of 58 mW, 32 mW Brillouin laser power at 154 mW pump power, and high-Fourier-frequency noise down to 0.2 Hz 2 /Hz. The long cavity lowers the high-Fourier-frequency noise floor and raises the threshold for higher-order Stokes generation,

Read the complete text