Initial Characterisation of a Prototype TMR Assembly for an Electron-Driven CANS at CERN’s CLEAR Facility

Laurence Wroe \IUCrCemaillink [email protected] \IUCrOrcidlink 0000-0002-6751-1353, Giorgi Kharashvili \IUCrEmaillink [email protected], Jonas Okkels Birk \IUCrEmaillink [email protected], Federico Vanti \IUCrEmaillink [email protected], Wilfrid Farabolini \IUCrEmaillink [email protected], Fares Elattab \IUCrEmaillink [email protected], Davide Gamba \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-1985-1847, Torsten Koettig \IUCrEmaillink [email protected], Roberto Corsini \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-0934-8199, Steinar Stapnes \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-0254-8198, Francois Plewinski \IUCrEmaillink [email protected] · 2026

Read Initial Characterisation of a Prototype TMR Assembly for an Electron-Driven CANS at CERN’s CLEAR Facility by Laurence Wroe \IUCrCemaillink [email protected] \IUCrOrcidlink 0000-0002-6751-1353, Giorgi Kharashvili \IUCrEmaillink [email protected], Jonas Okkels Birk \IUCrEmaillink [email protected], Federico Vanti \IUCrEmaillink [email protected], Wilfrid Farabolini \IUCrEmaillink [email protected], Fares Elattab \IUCrEmaillink [email protected], Davide Gamba \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-1985-1847, Torsten Koettig \IUCrEmaillink [email protected], Roberto Corsini \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-0934-8199, Steinar Stapnes \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-0254-8198, Francois Plewinski \IUCrEmaillink [email protected] (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-25068.txt.

Introduction

Laurence Wroe and colleagues report first tests of a trial target-moderator-reflector assembly for the VULCAN compact neutron source. VULCAN aims at an accelerator-driven neutron source for crystal studies in labs. It turns a 35 MeV electron pulse train into short neutron bursts under 20 microseconds wide, spanning 1.5 to 3.5 angstroms. The trial ran at CERN's CLEAR. Slowed pulses showed up, but measured and modelled energy spectra differed sharply, so the paper lists causes and calls for more tests.

Catalog record

CREATORLaurence Wroe \IUCrCemaillink [email protected] \IUCrOrcidlink 0000-0002-6751-1353, Giorgi Kharashvili \IUCrEmaillink [email protected], Jonas Okkels Birk \IUCrEmaillink [email protected], Federico Vanti \IUCrEmaillink [email protected], Wilfrid Farabolini \IUCrEmaillink [email protected], Fares Elattab \IUCrEmaillink [email protected], Davide Gamba \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-1985-1847, Torsten Koettig \IUCrEmaillink [email protected], Roberto Corsini \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-0934-8199, Steinar Stapnes \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-0254-8198, Francois Plewinski \IUCrEmaillink [email protected]
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31835
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.25068

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Initial Characterisation of a Prototype TMR Assembly for an Electron-Driven CANS at CERN’s CLEAR Facility Laurence Wroe \IUCrCemaillink [email protected] \IUCrOrcidlink 0000-0002-6751-1353, Giorgi Kharashvili \IUCrEmaillink [email protected], Jonas Okkels Birk \IUCrEmaillink [email protected], Federico Vanti \IUCrEmaillink [email protected], Wilfrid Farabolini \IUCrEmaillink [email protected], Fares Elattab \IUCrEmaillink [email protected], Davide Gamba \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-1985-1847, Torsten Koettig \IUCrEmaillink [email protected], Roberto Corsini \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-0934-8199, Steinar Stapnes \IUCrEmaillink [email protected] \IUCrOrcidlink 0000-0002-0254-8198, Francois Plewinski \IUCrEmaillink [email protected] Abstract The Versatile ULtra-Compact Accelerator-based Neutron source (VULCAN) project is developing a compact accelerator-driven neutron source (CANS) optimised for neutron diffractometry in industrial and university settings. Central to VULCAN is a novel target-moderator-reflector (TMR) assembly optimised to convert a 35 MeV 35\text{\,}\mathrm{M}\mathrm{e}\mathrm{V} pulsed electron beam into short neutron pulses (FWHM ≤ \leq 20 µ 20\text{\,}\mathrm{\SIUnitSymbolMicro} ) in the 1.5 Å to 3.5 Å 1.5\text{\,}\mathrm{\text{Å}}3.5\text{\,}\mathrm{\text{Å}} wavelength range. To validate the simulation-driven design process, a prototype TMR was developed for testing at CERN’s CLEAR facility, and this paper presents the design, installation, and results of the first experimental campaign. While moderated neutron pulses were successfully detected, significant discrepancies were observed between the experimental and simulated energy spectra. Potential causes are discussed and recommendations for follow-up measurements are provided. keywords Neutron scattering; neutron time of flight; CANS; electron linac {synopsis} This article presents the design, installation, and first experimental testing of a novel, prototype target–moderator–reflector (TMR) assembly for a compact accelerator-driven neutron source (CANS) driven by a 35\text{\,}\mathrm{M}\mathrm{e}\mathrm{V} electron beam. 1 Introduction Neutron scattering provides a powerful, non-destructive probe of matter at the atomic scale, offering deep penetration and unique sensitivity to light elements and isotopes [ 11 ] . It underpins research and innovation across a diverse range of fields from energy and climate to healthcare and advanced manufacturing, “provid[ing] the basis for innovation, new and better products and, in result, societal well-being” [ 3 ] . Most neutron scattering instrumentation are hosted at large scale research infrastructures (LSRIs) that use nuclear research reactors or spallation sources to generate neutron net yields of \gtrsim 1\text{\times}{10}^{16}\text{\,}\mathrm{n}\mathrm{/}\mathrm{s} and enable the operation of more than 30 instruments in parallel [ 6 ] . While there are just over 100 LSRIs in operation worldwide [ 8 , 9 ] , the demand for neutrons exceeds supply and many instruments are oversubscribed by more than a factor of two. This imbalance is expected to only worsen as ageing reactors are retired without replacement [ 4 ] . Compact accelerator-driven neutron sources (CANS) are a promising route to expand access to neutron techniques beyond LSRIs. They deliver lower energy ( \lesssim~$100\text{\,}\mathrm{M}\mathrm{e}\mathrm{V}$ ), lower power ( \lesssim~$10\text{\,}\mathrm{k}\mathrm{W}$ ) particle beams to target–moderator–reflector (TMR) assemblies optimised to create tailored neutron spectra for specific instrumentation and applications. While providing significantly lower fluxes than their LSRI counterparts, CANS enable scalability through smaller footprint and capital cost, reduced operational complexity and licensing requirements, lower radioactive waste production, and flexibility to tailor instrumentation and sample environments to specific user needs [ 3 ] . The Versatile ULtra-Compact Accelerator-based Neutron source (VULCAN) project seeks to realise a turnkey CANS that is optimised for neutron diffractometry in industrial and university settings. Such facilities will utilise a compact electron linear accelerator (linac) to deliver a 35\text{\,}\mathrm{M}\mathrm{e}\mathrm{V} , kilowatt-scale electron beam to a TMR optimised to generate slow neutrons in the 1.5\text{\,}\mathrm{\text{Å}}3.5\text{\,}\mathrm{\text{Å}} wavelength range for time of flight measurements. A conceptual visualisation is shown in Figure 1 , with further details provided in Refs. [ 12 , 13 ] . Figure 1 : Conceptual visualisation of the VULCAN facility. Key to the success of VULCAN is a TMR design that efficiently converts the electron beam into the desired slow neutrons. To validate the simulation-based design framework, a prototype TMR was constructed and characterised at CERN’s CLEAR facility. This paper presents the prototype design, experimental setup, and initial results. The paper is structured as follows: section 2 provides an overview of the experiment, section 3 describes the prototype TMR design, and section 4 details the experimental setup at CLEAR, including installation, modelling, and data processing. section 5 compares the measured neutron yields and spectra with simulation predictions and discusses potential causes for observed discrepancies. section 6 summarises the findings and discusses next steps for future testing. 2 Experimental Overview The VULCAN concept has been under development since 2021 by an industrial consortium of DAES SA, the Danish Technological Institute, and Xnovo Technology ApS, with support from CERN since 2023. To ensure that the compactness, cost, and complexity of the facility are compatible with its intended performance and business model, VULCAN operates as a time of flight neutron source driven by a pulsed electron linac [ 12 ] . Dedicated research and development efforts have focused on the design of a novel, compact TMR assembly capable of converting a pulsed 35\text{\,}\mathrm{M}\mathrm{e}\mathrm{V} incident electron beam into the desired thermal neutron spectrum. The design targets production of 6\text{\,}\mathrm{m}\mathrm{e}\mathrm{V}36\text{\,}\mathrm{m}\mathrm{e}\mathrm{V} neutrons (wavelengths 1.5\text{\,}\mathrm{\text{Å}}3.5\text{\,}\mathrm{\text{Å}} , velocities 1.1\text{\,}\mathrm{k}\mathrm{m}\mathrm{/}\mathrm{s}2.6\text{\,}\mathrm{k}\mathrm{m}\mathrm{/}\mathrm{s} ) with an initial pulse full width at half maximum (FWHM) of \leq 20\text{\,}\mathrm{\SIUnitSymbolMicro} to achieve the needed resolution within a sufficiently compact flight path (order of 10\text{\,}\mathrm{m} ) for industrial deployment. The TMR design has been iteratively developed using the Monte Carlo radiation transport code FLUKA [ 1 , 2 , 5 ] . To enable early-stage validation of this design process, a prototype TMR assembly based on a decoupled, cold liquid methane moderator and without active target cooling was fabricated to compare measured neutron flux, energy spectrum, and pulse FWHM with simulation predictions. As modelling studies indicated that the temporal pulse structure has significant dependence on neutron poisoning, the prototype was designed to operate in both poisoned and unpoisoned configurations to further validate the modelling framework. CERN’s CLEAR (CERN Linear Electron Accelerator for Research) facility provided the electron beam for testing the TMR prototype [ 7 ] . Its 30\text{\,}\mathrm{m} -long beamline includes a spectrometer for energy measurement and a comprehensive suite of diagnostics, including bunch charge monitors, beam position monitors, and YAG screens for beam characterisation. The accelerator optics, as well as the power and phase of the RF fields delivered to each of the four accelerating structures, can be individually and remotely set, enabling a wide range of beam parameters in energy, energy spread, charge, bunch length, and transverse size. CLEAR also provides short access times to the accelerator hall, with post-operation cooldowns of only 15\text{\,}\mathrm{min}30\text{\,}\mathrm{min} permitting multiple adjustments of the experimental setup throughout the day. Table 1 summarises the electron beam parameters required for the final VULCAN design, those used for optimising the prototype design in simulation, and those attainable at the CLEAR facility. As the prototype TMR lacks active cooling, it was designed to operate at substantially reduced beam power. The main discrepancies between the simulation-optimised conditions and those achievable at CLEAR were the beam energy and transverse beam size at the target. The beam could not be reliably transported below 40\text{\,}\mathrm{M}\mathrm{e}\mathrm{V} , and its transverse size could not be reduced below 4\text{\,}\mathrm{m}\mathrm{m} owing to the relatively large distance between the final set of focusing quadrupoles in CLEAR and the TMR target. To enable direct comparison between simulation and experiment, the beam energy, size, and charge were recorded for each measurement and simulations were subsequently performed using these recorded parameters as inputs. Table 1

Read the complete text