Geometric Workspace Analysis and Transmission-Aware Dynamics of a Serial Spherical Tool for Microsurgery
Anestis Mablekos-Alexiou, Lyndon da Cruz, and Christos Bergeles · 2026
Read Geometric Workspace Analysis and Transmission-Aware Dynamics of a Serial Spherical Tool for Microsurgery by Anestis Mablekos-Alexiou, Lyndon da Cruz, and Christos Bergeles (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-24760.txt.
Introduction
Anestis Mablekos-Alexiou and others present a design framework for a serial spherical microsurgery tool with extra sliding motion. First, workspace math gives geometric insight on reachable motion and allows rapid axis selection without numerical optimization. Second, a motion-based method for self-locking transmissions supports torque evaluation for a set workspace shape. An open-source package covers friction identification and inverse dynamics. Tests on a purpose-built vitreoretinal surgery tool validate the models and show practical engineering utility.
Catalog record
| CREATOR | Anestis Mablekos-Alexiou, Lyndon da Cruz, and Christos Bergeles |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 27741 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.24760
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Geometric Workspace Analysis and Transmission-Aware Dynamics of a Serial Spherical Tool for Microsurgery Anestis Mablekos-Alexiou, Lyndon da Cruz, and Christos Bergeles Abstract We present a kinematic and transmission-aware design framework for a serial spherical mechanism with an additional translational degree of freedom for microsurgery. The first contribution is an analytical workspace formulation that provides geometric insight into reachable motion and enables rapid selection of rotation axis orientations without numerical optimization. The second contribution is a dynamics-informed methodology for mechanisms driven by self-locking transmissions, supporting evaluation of torque requirements for a prescribed workspace geometry. The framework is accompanied by an open-source software package for friction identification and inverse dynamics analysis. Experiments on a purpose-built robotic tool for vitreoretinal surgery validate the predictive capability of the models and demonstrate their practical utility for engineering design. I Introduction Spherical mechanisms, whether in serial [ 6 , 28 ] or parallel configurations [ 25 ] , consist of pin-jointed spatial linkages whose axes of revolution intersect at a single point in space. This property, which produces a remote center of motion (RCM), makes them highly compatible with robotic surgery as an alternative to parallelogram-based mechanisms. The literature on spherical mechanisms covers parallel [ 24 , 14 , 2 , 3 , 4 , 13 , 11 , 30 , 9 ] , scissor [ 1 ] , and serial configurations [ 15 , 16 , 10 , 12 ] . Specifically, for the serial spherical mechanism (SSM), Lum et al. [ 15 , 16 ] and Laribi et al. [ 12 ] proposed a four degree of freedom (DoF) robot for minimally invasive surgery, while Kim et al. [ 10 ] presented a 5-DoF manipulator for robotic endoscopy. Overall, the majority of previous works on the SSM have focused on its kinematics, often exploiting numerical methods to optimize the manipulator structure. While these methods provide reliable solutions, they often offer limited geometric insight into the relationship between joint-axis configuration and achievable motion, making rapid analysis and early-stage design decisions less intuitive. We show that a geometric formulation leads to an analytically interpretable description of mechanism motion, providing insight into workspace structure while remaining directly applicable to analysis and engineering design. Figure 1: A 4-DoF robotic tool for vitreoretinal surgery. Bottom row: various orientations of the mechanism. In particular, this work contributes an integrated kinematics- and dynamics-based approach for the analysis and engineering of a self-locking 4-DoF SSM. We begin by presenting a geometric approach using twist parametrization, which yields a compact analytical workspace representation that explicitly relates joint-axis geometry to the achievable orientation workspace. This approach enables the selection of rotation axis angles based on specific motion requirements, which can be more challenging for optimization-based methods to achieve with the same speed and intuitiveness. The analysis is further complemented by a geometrically meaningful, fast-to-compute, and numerically stable closed-form solution for the inverse kinematics, utilizing the Paden-Kahan subproblems [ 22 ] . Next, we analyze the SSM when driven by high-impedance transmissions, where actuator behavior is dominated by friction. This transmission-aware dynamics modeling informs motor selection via torque prediction for low velocity surgical tasks. Using the dynamics detailed in [ 17 , 19 , 18 , 21 ] , we release an open-source software package [ 20 ] to calculate the robot’s power requirements and estimate the friction parameters of the transmission systems, both essential for proper motorization and the development of accurate equations of motion (EoM). Figure 2: Workspace calculations of the 4-DoF SSM: (a) numbering conventions and twist parametrization, (b) rotation of v_{4} about \omega_{2} , (c) rotation of {e^{\hat{\omega}_{2}\theta_{2}}v_{4}} about \omega_{1} , (d) tilt angle range. We demonstrate the utility of the proposed framework by engineering a robotic tool for vitreoretinal surgery (see Fig. 1 ). The presented kinematics and dynamics are applied to satisfy the workspace and actuation requirements of the application, while experimental results confirm the predictive capability of the analytical models, demonstrating 98\% agreement between theoretical and measured workspace limits and over 85\% agreement between simulated and measured torque responses. II Kinematics This section discusses the kinematics of the 4-DoF SSM for the general case of arbitrary angles between the rotation axes. We begin by introducing some preliminaries and the notation required for the kinematics description. II-A Parametrization & Forward Kinematics Preliminaries Consider the 4-DoF SSM comprising of three rotational joints and one translational unit that moves the end-effector along a line passing through the RCM. We place the base frame at the RCM and the tool frame at the end-effector with initial configuration {g_{0}=(R_{0},0)\in SE(3)} . Joints 1 to 4 are connected with links such that joint i connects links {i-1} and i . The rotational joints are numbered from 1 to 3 with directions \omega_{1} , \omega_{2} , and {\omega_{3}} , respectively. The translational unit corresponds to joint 4 with direction v_{4} , which coincides with {\omega_{3}} , as shown in Fig. 2 (a). The angle between \omega_{1} and \omega_{2} is denoted by \alpha , while the angle between \omega_{2} and {\omega_{3}} by \beta . Then, the unit twist coordinates {\xi_{i}\in\mathbb{R}^{6}} for the i th joint can be written as \xi_{i}=\begin{cases}(0,\omega_{i})\textnormal{ }i=1,2,3,\\ (v_{i},0)\textnormal{ }i=4.\\ \end{cases} (1) Assuming unrestricted motion for any joint, the joint space Q for the 4-DoF SSM is {Q=\mathbb{T}^{3}\times\mathbb{R}} , where \mathbb{T}^{3} represents the 3 -torus. Given a set of joint angles {\theta=(\theta_{1},\theta_{2},\theta_{3},\theta_{4})\in Q} , the tool frame relative to the base frame is represented by a mapping {g_{st}:Q\mapsto SE(3)} . Utilizing the product of exponentials [ 22 ] , the SSM forward kinematics can be written as {g_{st}(\theta)=(R_{st},p_{st})} with \displaystyle R_{st}=e^{\hat{\omega}_{1}\theta_{1}}e^{\hat{\omega}_{2}\theta_{2}}e^{\hat{\omega}_{3}\theta_{3}}R_{0}, (2a) \displaystyle p_{st}=e^{\hat{\omega}_{1}\theta_{1}}e^{\hat{\omega}_{2}\theta_{2}}v_{4}\theta_{4}. (2b) II-B Geometric Workspace Analysis We define the roll axis to coincide with the axis of \omega_{1} , and the tilt axis, being perpendicular to \omega_{1} , to lie in the plane spanned by \omega_{1} and \omega_{2} . To analyze the pivoting motion generated by the SSM, we consider a geometric representation of its workspace about the RCM, capturing the achievable angular range. This range, defined by rotations about the roll and tilt axes, can be described as the set of reachable points on the unit sphere centered at the RCM, from which the achievable angular range can be inferred. Thus, we define the SSM workspace as W:=\big\{p_{st}\;\big|\;\theta_{1},\theta_{2}\in\mathbb{S}^{1},\theta_{4}=1\big\}\subseteq\mathbb{S}^{2}, (3) where p_{st} is given by ( 2b ) and \mathbb{S}^{2} denotes the 2 -sphere. Observing ( 2b ) for the conditions of ( 3 ), the SSM workspace can be visualized as follows. First, since {e^{\hat{\omega}\theta}} corresponds to a rotation about \omega by \theta , the product {e^{\hat{\omega}_{2}\theta_{2}}v_{4}} for {\theta_{2}\in\mathbb{S}^{1}} generates a circle on the unit sphere with radius {||v_{4}-\omega_{2}\omega_{2}^{T}v_{4}||} and its center lying on the \omega_{2} axis [see Fig. 2 (b)]. Then, the product e^{\hat{\omega}_{1}\theta_{1}}(e^{\hat{\omega}_{2}\theta_{2}}v_{4}) for {\theta_{1}\in\mathbb{S}^{1}} , which forms W , generates a family of concentric circles on the unit sphere with radii {||e^{\hat{\omega}_{2}\theta_{2}}v_{4}-\omega_{1}\omega_{1}^{T}e^{\hat{\omega}_{2}\theta_{2}}v_{4}||} and centers lying on the \omega_{1} axis [see Fig. 2 (c)]. Considering that W results from unrestricted rotation about the roll axis \omega_{1} , the SSM workspace can be fully characterized by its tilt angle range. Specifically, the intersection of W with any plane containing the RCM and \omega_{1} forms arcs whose angular extent and position relative to \omega_{1} determine the achievable tilt range.