Altitude-Dependent RSRP and RSRQ Trade-offs in 5G NR UAV Networks This work is supported in part by the NASA ULI award 80NSSC25M7102 and in part by NSF CNS-2443035.
Md Sharif Hossen, Vijay K. Shah and Ismail Guvenc · 2026
Read Altitude-Dependent RSRP and RSRQ Trade-offs in 5G NR UAV Networks This work is supported in part by the NASA ULI award 80NSSC25M7102 and in part by NSF CNS-2443035. by Md Sharif Hossen, Vijay K. Shah and Ismail Guvenc (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-24669.txt.
Introduction
Md Sharif Hossen and others map how altitude reshapes 5G service for drones. Downward-tilted antennas serve and jam flying users through sidelobes. That regime differs sharply from ground users. The authors build a standards-compliant model with multi-site tri-sector layouts, realistic antenna patterns, and line-of-sight odds. They track received power, received quality, and signal-to-interference ratio. Higher flight shifts users from coverage-limited to interference-limited service. Power fades gradually, but interference grows fast, while wider site spacing improves quality despite lower power.
Catalog record
| CREATOR | Md Sharif Hossen, Vijay K. Shah and Ismail Guvenc |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 26287 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.24669
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Altitude-Dependent RSRP and RSRQ Trade-offs in 5G NR UAV Networks This work is supported in part by the NASA ULI award 80NSSC25M7102 and in part by NSF CNS-2443035. Md Sharif Hossen, Vijay K. Shah and Ismail Guvenc Abstract Cellular-connected unmanned aerial vehicles (UAVs) in 5G NR networks experience propagation and interference conditions that vary significantly with altitude and differ substantially from those experienced by terrestrial users. This is primarily caused by the down-tilted antenna sectors in 5G NR networks, which cause UAVs to be served (and interfered with) by the sidelobes. In this paper, we develop a 3GPP-compliant system-level framework for the consistent characterization of key performance indicators (KPIs) such as reference signal received power (RSRP), reference signal received quality (RSRQ), and signal-to-interference-and-noise ratio (SINR) in a multi-site tri-sector deployment with realistic antenna patterns and probabilistic models for line-of-sight (LOS) and non-LOS (NLOS) conditions. Simulation results demonstrate that a critical transition for aerial users is experienced when going from coverage-limited to interference-limited conditions at higher altitudes. Although RSRP is affected by large-scale propagation characteristics and degrades gradually with increasing altitude and inter-site distance (ISD), SINR degrades much faster due to increased interference caused by LOS conditions. On the contrary, increasing ISD improves SINR and RSRQ due to lower interference, even as received power is reduced. I Introduction and Related Works The integration of unmanned aerial vehicles (UAVs) into cellular networks has gained significant attention due to their potential in applications such as surveillance, emergency response [ 14 ] , and data collection [ 7 , 8 ] . In particular, 5G New Radio (NR) networks provide a promising platform for enabling wide-area UAV command and control (C2) connectivity using existing terrestrial infrastructure. However, unlike ground user equipments (GUE) that operate in a two-dimensional plane, UAVs operate in a three-dimensional (3D) space, where propagation characteristics and antenna patterns vary significantly with altitude. This fundamentally alters both coverage and interference behavior in cellular networks. In parallel, electronic conspicuity (EC) frameworks have emphasized the need for reliable detection and communication of aerial vehicles for safe airspace integration [ 15 ] . However, existing EC approaches often suffer from coverage and interference limitations, particularly in dense environments. These challenges motivate the use of cellular infrastructure, such as 5G NR, for reliable UAV connectivity, where performance critically depends on altitude-dependent radio conditions. As UAV altitude increases, the probability of line-of-sight (LOS) with terrestrial base stations (BSs) increases, leading to increased LOS visibility, which alters received signal characteristics. Also, it exposes UAVs to a larger number of interfering cells, significantly elevating inter-cell interference (ICI) [ 11 ] . UAVs are often served by BS sidelobes, leading to weak desired signal strength and strong interference from multiple cells [ 16 ] . Hence, UAV communication transitions from coverage-limited operation at low altitudes to interference-limited operation at higher altitudes. This altitude-dependent coupling between coverage and interference presents a key challenge for reliable aerial connectivity. Recent studies have investigated UAV communications using analytical, measurement-based, and data-driven approaches. Foundational works have characterized UAV integration into cellular networks and highlighted key challenges in coverage and interference [ 13 , 5 ] , including practical UAV-assisted BS deployments that demonstrate coverage benefits and also reveal significant air–ground interference limitations [ 17 , 12 ] . Standardization efforts and system-level evaluations based on 3GPP models provide realistic frameworks for aerial users [ 2 , 1 , 12 ] . Measurement-driven studies have revealed altitude-dependent propagation and interference characteristics [ 11 , 9 ] , including empirical channel characterization works that show reduced multipath effects and path loss variations with increasing altitude [ 10 ] . In addition, comprehensive surveys on UAV-enabled networks highlight key challenges in communication reliability and network integration, but primarily provide qualitative insights rather than detailed system-level modeling [ 4 ] . Recent works have also analyzed the impact of LOS-dominated interference at higher altitudes [ 6 , 18 ] . Data-driven approaches have also been explored for UAV channel modeling and performance prediction [ 3 ] . However, most existing works analyze performance metrics such as reference signal received power (RSRP) or signal-to-interference-and-noise ratio (SINR) independently, or without a unified framework that consistently captures the interplay between received power, interference, and noise across KPIs such as RSRP, reference signal received quality (RSRQ), and SINR. Moreover, while antenna patterns are often implicitly considered, the role of downtilted BS antennas and the resulting sidelobe-dominated connectivity for aerial users is not explicitly analyzed at the system level, which brings a gap in the altitude-dependent interference behavior of cellular networks. This work addresses these limitations by explicitly modeling sidelobe-driven connectivity and multi-cell interference for aerial users in 3GPP-compliant multi-cell 5G NR networks. By explicitly coupling received power, aggregate interference, and noise within a unified formulation, the proposed framework enables a consistent and physically interpretable analysis of altitude-dependent coverage–interference trade-offs, which is critical for the design and optimization of aerial cellular networks, where interference-aware mechanisms are required to ensure reliable UAV connectivity. Motivated by the recent elevated interest in serving UAVs by 5G NR networks [ 15 ] , the main contributions of this paper are summarized as follows: • We develop a 3GPP-compliant system-level framework for evaluating altitude-dependent UAV performance in 5G NR networks, incorporating realistic deployment geometry, antenna patterns, interference conditions, and probabilistic LOS/NLOS propagation. • We establish a consistent KPI formulation that jointly captures received power, interference, and noise, ensuring alignment across RSRP, RSRQ, and SINR. • We characterize the altitude-dependent transition from coverage-limited to interference-limited operation and quantify its impact on aerial link performance. • We reveal a non-intuitive inter-site distance (ISD) trade-off, where increasing ISD reduces interference and improves SINR and RSRQ despite degrading RSRP. • We demonstrate that RSRQ serves as a practical indicator of interference dominance and captures the coverage–interference decoupling in aerial networks. The remainder of this paper is organized as follows. Section II presents the system model, including the network topology, antenna configuration, and propagation modeling. Section III defines the performance metrics and KPI characterization. Section IV provides numerical results and discusses key observations on altitude-dependent coverage and interference trade-offs. Finally, Section V concludes the paper. II System Model In this section, we discuss the cellular deployment geometry, antenna pattern, and channel models. II-A Network Topology We consider a 19-cell hexagonal cellular deployment with inter-site distance ( \mathrm{ISD} ) as a control parameter to study performance trade-offs. Each base station (BS) site is equipped with three sectors separated by 120^{\circ} in azimuth. This results in a total of N=57 sectors, and each sector is indexed by s\in\{1,2,\dots,N\} . Fig. 1 shows the network geometry where the center cell is used as the region for UAV performance evaluation, while the surrounding cells generate ICI. To ensure boundary effects and consistent interference, wrap-around geometry is employed so that edge users experience interference equivalent to that in an infinite cellular layout [ 2 ] [ 1 ] . Fig. 1 : A 19-cell hexagonal cellular deployment with tri-sector BSs with wrap-around geometry. II-B Aerial User Geometry The UAV is placed at an altitude h to operate within the center cell of the network, where three deterministic horizontal positions (x,y) are considered, which are located at cell-center, cell-middle, and