Elevator-LIO: Robust LiDAR-Inertial Odometry for Multi-Floor Navigation under Elevator-Induced Non-Inertial Motion
Yifan Zhang, Yudong Huang, Yuchong Zhang, Changze Li, Haoran Liu, Ming Yang, and Tong Qin* · 2026
Read Elevator-LIO: Robust LiDAR-Inertial Odometry for Multi-Floor Navigation under Elevator-Induced Non-Inertial Motion by Yifan Zhang, Yudong Huang, Yuchong Zhang, Changze Li, Haoran Liu, Ming Yang, and Tong Qin* (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-24495.txt.
Introduction
Yifan Zhang and colleagues present Elevator-LIO, a 2026 system that keeps a robot located while riding elevators between floors. It models robot motion and elevator motion apart inside a mode-dependent Kalman filter, and spots elevator entry and exit from laser ranging data. Stops trigger zero-velocity and zero-acceleration updates that curb vertical drift. Across 20 test runs covering 79 elevator rides, 17 runs ended with height error under one centimeter.
Catalog record
| CREATOR | Yifan Zhang, Yudong Huang, Yuchong Zhang, Changze Li, Haoran Liu, Ming Yang, and Tong Qin* |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 75517 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.24495
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Elevator-LIO: Robust LiDAR-Inertial Odometry for Multi-Floor Navigation under Elevator-Induced Non-Inertial Motion Yifan Zhang, Yudong Huang, Yuchong Zhang, Changze Li, Haoran Liu, Ming Yang, and Tong Qin* Abstract This paper presents Elevator-LIO, a LiDAR-inertial odometry framework designed to achieve continuous robot localization during elevator travel, thereby supporting cross-floor robotic tasks. To address the state-estimation problem in non-inertial frames, Elevator-LIO establishes a decoupled state-estimation model that separately models the robot motion relative to the elevator and the elevator motion itself, and embeds it into a mode-dependent iterated error-state Kalman filter framework. This framework degenerates to conventional LIO estimation in ordinary indoor environments, while enabling the propagation and constrained update of elevator-related states in elevator non-inertial environments, thereby achieving continuous and stable localization. An elevator mode manager detects elevator entry and exit events using LiDAR ranging statistics and estimated states, and introduces event-triggered zero-velocity and zero-acceleration updates when the elevator stops to suppress accumulated vertical drift. In addition, this paper adopts an adaptive voxel downsampling strategy to maintain a stable number of effective points under significant environmental scale changes. We conduct extensive experiments on 20 real-world sequences containing 79 elevator rides, including practical challenges such as large-scale spaces, long vertical travel, dynamic pedestrian interference, and mirror reflections. The results show that Elevator-LIO maintains continuous localization accuracy in all sequences, with terminal height error below 1 cm in 17 sequences. In contrast, existing representative localization systems perform poorly on these elevator sequences. Tests on the Hilti 2022/2023 datasets further show that the proposed method remains competitive in standard indoor scenarios. The project page is available at https://xiaofan4122.github.io/Elevator_LIO_Page/ . I Introduction Multi-floor mobility is a fundamental requirement for autonomous mobile robots (AMRs) deployed in modern buildings, where elevators serve as the primary means of vertical transportation between floors. Cross-floor navigation via elevators is indispensable for practical indoor autonomy. However, it remains a major challenge for robot localization and frequently acts as a critical failure point in real-world deployments. Over the past decade, vision-based SLAM systems [ 13 , 3 , 18 ] have achieved impressive accuracy but often struggle with illumination variations, motion blur, and high computational demands for dense mapping [ 6 , 5 ] . LiDARs have been playing an increasingly important role in a wide range of autonomous robotic platforms, including autonomous ground vehicles (AGVs) navigating complex terrains [ 15 ] and unmanned aerial vehicles (UAVs) performing agile maneuvers in cluttered environments [ 34 ] . Particularly, in GPS-denied indoor environments, LiDAR-inertial odometry (LIO) has become a mainstream solution for robot state estimation because it combines the geometric accuracy of LiDAR with the high-rate motion sensing of the IMU [ 25 , 24 , 7 ] . However, their success relies on a basic assumption: the sensor platform operates in an inertial reference frame, so that IMU measurements can be consistently interpreted as robot ego-motion and fused with LiDAR constraints. Fig. 1: Conceptual illustration of Elevator-LIO. a: cross-floor robotic navigation requires continuous localization while the robot is transported by an elevator. b: inside the elevator cabin, the robot operates in a moving non-inertial frame, where the IMU captures motion affected by elevator transport, whereas the LiDAR observes cabin-relative geometry. Elevator-LIO addresses this sensing inconsistency by decoupling the robot-relative state from the elevator transport state. c: a representative real-world result showing continuous trajectory estimation and globally consistent multi-floor mapping across elevator traversal. This assumption breaks down when the robot is inside a moving elevator. Once the robot enters the cabin, the platform is placed in a non-inertial environment, and the measured acceleration becomes contaminated by elevator motion. Meanwhile, LiDAR observations inside the cabin mainly provide local geometric constraints relative to the elevator interior rather than the world frame. Consequently, a conventional LIO pipeline may incorrectly attribute elevator-induced motion to the robot itself, leading to severe drift, inconsistency, or even divergence. This mismatch makes reliable state estimation during elevator motion a key bottleneck for multi-floor localization. The difficulty arises from two aspects. First, from the estimation perspective, IMU measurements inside the cabin contain a superposition of elevator translational motion and robot motion relative to the elevator. Without explicitly separating these components, state propagation accumulates large integration errors. Moreover, since LiDAR can only observe relative motion inside the cabin, it cannot update the corresponding absolute-motion states. These states therefore become unobservable during elevator travel, and their uncertainty keeps increasing over time, making reliable estimation progressively more difficult. Second, from the front-end perspective, the robot experiences abrupt scene scale changes when moving between open floors and confined elevator cabins. Fixed-resolution downsampling then becomes unstable: overly dense observations impair real-time efficiency, whereas overly sparse observations can lead to rapid degradation or even failure in narrow elevator environments. Related multi-floor or elevator-aware systems typically focus on mapping, navigation, or floor transition management [ 33 , 8 , 19 ] , rather than maintaining continuous localization while the robot is physically inside a moving elevator. Therefore, a dedicated treatment of the non-inertial estimation problem is still missing. To address these challenges, we propose Elevator-LIO , a LiDAR-inertial localization framework for continuous operation across floor–elevator transitions. The key idea is to explicitly separate elevator motion from robot motion relative to the elevator and to estimate both within a unified state-estimation framework. By augmenting the elevator motion along the vertical direction into the system state and combining it with LiDAR relative constraints, the proposed method avoids directly treating elevator-induced acceleration as robot ego-motion, which is the main source of failure in conventional LIO during elevator traversal. Because the elevator-related state remains weakly observable, we introduce a zero-state update (velocity and acceleration) mechanism at elevator stops to suppress accumulated vertical drift. To make this correction reliable in practice, we design a lightweight elevator state detector that identifies the onset and termination of elevator motion solely from onboard sensing, without relying on external infrastructure, thereby providing robust triggers for state transition and ZUPT correction. In parallel, we develop a feedback-driven adaptive downsampling front-end to cope with the drastic change in observation scale between open floors and confined cabins. Instead of using a fixed voxel resolution, the front-end adjusts the downsampling scale online according to point-cloud feedback, so that the number of effective input points remains within a safe operating range. This design improves both computational stability and geometric conditioning across large scene transitions. The proposed system operates using only a LiDAR with an integrated IMU. Experiments across public datasets, real-world data and a dedicated simulator show that Elevator-LIO maintains continuous, divergence-free localization during all tested elevator transitions, yields accurate floor-level vertical estimation, and preserves competitive performance in standard inertial environments. The main contributions of this paper are summarized as follows: 1. We propose a LiDAR–inertial localization framework for robot operation in elevators, and derive the decoupled motion equations in the elevator-induced non-inertial frame for stable estimation of both the robot pose relative to the elevator and its absolute pose. 2. We develop a drift-suppression mechanism tailored to real elevator travel by combining zero state update correction with a lightweight elevator state detector, improving robustness against uncertainty accumulation during elevator motion. 3. We introduce a feedback-driven adaptive downsampling strategy that maintains a consistent point cloud density, thereby ensuring robust front-end geometric constraints across abrupt