A Digital Twin Platform Enabling Monolithic Crystal-Free Bluetooth Low Energy Single-Chip Sensor Motes CCS: Hardware Radio frequency and wireless circuits CCS: Hardware Wireless devices CCS: Hardware Sensor devices and platforms CCS: Hardware Digital signal processing CCS: Hardware Noise reduction CCS: Hardware Circuits power issues CCS: Hardware Analog and mixed-signal circuit optimization CCS: Hardware Hardware-software codesign CCS: Hardware Model checking CCS: Hardware Analog, mixed-signal and radio frequency test CCS: Hardware Emerging simulation CCS: Hardware Emerging tools and methodologies CCS: Computer systems organization System on a chip
Brandon P. Hippe*, David C. Burnett**, Jacob N. Louie*, Tengfei Chang**, Dingyu Zhou*, Alfonso Cortés, Filip Maksimovic · 2026
Read A Digital Twin Platform Enabling Monolithic Crystal-Free Bluetooth Low Energy Single-Chip Sensor Motes CCS: Hardware Radio frequency and wireless circuits CCS: Hardware Wireless devices CCS: Hardware Sensor devices and platforms CCS: Hardware Digital signal processing CCS: Hardware Noise reduction CCS: Hardware Circuits power issues CCS: Hardware Analog and mixed-signal circuit optimization CCS: Hardware Hardware-software codesign CCS: Hardware Model checking CCS: Hardware Analog, mixed-signal and radio frequency test CCS: Hardware Emerging simulation CCS: Hardware Emerging tools and methodologies CCS: Computer systems organization System on a chip by Brandon P. Hippe*, David C. Burnett**, Jacob N. Louie*, Tengfei Chang**, Dingyu Zhou*, Alfonso Cortés, Filip Maksimovic (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-24277.txt.
Introduction
Hippe and six co-authors build a digital-twin setup for Bluetooth Low Energy development for crystal-free sensor motes. Low-power wireless chips matter for sensing at scale, but new architectures lack development platforms. Their system offers physical-layer control and runs with multiple radio front ends and basebands. One setup uses a software-defined radio with RTL and firmware; another uses a crystal-free chip front end with FPGA baseband. The setups exchange sensor data with commercial Bluetooth devices and reach sensitivity up to minus 82 dBm.
Catalog record
| CREATOR | Brandon P. Hippe*, David C. Burnett**, Jacob N. Louie*, Tengfei Chang**, Dingyu Zhou*, Alfonso Cortés, Filip Maksimovic |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 40919 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.24277
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A Digital Twin Platform Enabling Monolithic Crystal-Free Bluetooth Low Energy Single-Chip Sensor Motes CCS: Hardware Radio frequency and wireless circuits CCS: Hardware Wireless devices CCS: Hardware Sensor devices and platforms CCS: Hardware Digital signal processing CCS: Hardware Noise reduction CCS: Hardware Circuits power issues CCS: Hardware Analog and mixed-signal circuit optimization CCS: Hardware Hardware-software codesign CCS: Hardware Model checking CCS: Hardware Analog, mixed-signal and radio frequency test CCS: Hardware Emerging simulation CCS: Hardware Emerging tools and methodologies CCS: Computer systems organization System on a chip Brandon P. Hippe*, David C. Burnett**, Jacob N. Louie*, Tengfei Chang**, Dingyu Zhou*, Alfonso Cortés, Filip Maksimovic Abstract . Low-power wireless-capable systems-on-chips (SoCs) are critical for researching many of our current environmental issues. The scale at which these devices are needed for many applications necessitates innovation in their design to reduce the various capital and labor costs involved with operating an extensive sensor network. This can be difficult for devices with novel wireless architectures, as many emerging architectures lack commercially available development platforms. This makes pre-silicon validation challenging, and the impact of a failed tapeout is unacceptable when the cost is of primary concern for these devices. In this work, we propose a digital twin ecosystem for Bluetooth Low-Energy (BLE) with physical-layer (PHY) control intended for novel device development and demonstrated through use with crystal-free single-chip sensor motes. We present this system operating with multiple RF front ends and digital baseband implementations, including a commercially available Software Defined Radio (SDR) with synthesized RTL and embedded firmware, along with an existing crystal-free SoC front end and FPGA digital baseband. These configurations are shown to be capable of communicating sensor data with commercially available BLE devices and achieving receiver sensitivities up to -82 dBm, exceeding the minimum BLE specification. This approach is extendable to other hardware and communication protocols and promises to enable inexpensive, reusable validation and verification tools for novel wireless devices. Figure 1. Proposed digital twin platform, with Crystal-Free SCµM RF Front End and FPGA Digital Baseband, appearing as a connectable device in a BLE scanner app ( Silicon Labs 2025 ) . 1. Introduction Figure 2. Block diagram of the proposed Bluetooth low-energy digital twin transceiver, showing how various subsystems can be implemented in multiple ways. The analog front end can be implemented using a commercially available software-defined radio or custom RF integrated circuit and supports traditional and crystal-free architectures. The digital baseband can be fulfilled in either software or hardware, allowing for easy design iterations and pre-silicon validation. A barebones link layer is implemented in software, allowing for bit-level control of the transceiver. The Internet of Things (IoT) promises improvements in everything from lifestyle to scientific research. However, there are still a variety of challenges before the Internet of Things becomes as ubiquitous as envisioned. Chief among these challenges is the cost of IoT devices. These costs come from various sources, including the labor required to deploy and maintain the device, the infrastructure required to operate the network, and the power consumed by the devices. Research is underway in novel system designs, energy reduction and harvesting techniques, and wireless communication strategies to help improve the adoption of the Internet of Things. Our proposed system is a "Digital Twin" development ecosystem for Bluetooth Low-Energy (BLE) implementations using crystal-free wireless architectures, as is shown in Figure 2 . This system uses commercial-off-the-shelf (COTS) Software-Defined Radios (SDRs) for the base platform, with the ability to substitute any subsystem, such as new transmitter/receiver systems, analog front-ends, and digital baseband implementations, and gives this ecosystem wide-ranging compatibility with existing low-cost devices. This approach also allows subsystems of already fabricated devices to be used, even if they are incomplete or do not fully meet the specifications of the target design. This streamlines the design process of new devices and allows for easier and more cost-efficient iteration during the design process. Although this work is intended for crystal-free BLE device development, this system is beneficial for other wireless architectures. Our proposed system is viable as a basic framework for low-level digital twins for other wireless protocols. BLE is among the most widely used wireless communication protocols available, with billions of existing devices having BLE capabilities. BLE networks are minimally dependent on other infrastructure, so routers, network switches, cellular towers, repeaters, etc., are unnecessary. BLE is also suitable for battery-powered devices or devices that utilize energy harvesting techniques. These advantages are crucial in minimizing infrastructure and maintenance costs of a large-scale IoT deployment. Although digital twins are common in the development of 5G and 6G wireless systems ( Wu et al. 2021 ; Nguyen et al. 2021 ; Tang et al. 2022 ; Khan et al. 2022 ; Lin et al. 2023 ; Ahmadi et al. 2021 ; Van Huynh et al. 2022 ; Zhang et al. 2022 ; Bariah et al. 2023 ; Pengnoo et al. 2020 ) , similar developments are lacking in the low-power IoT space. The proposed digital twin is targeted at improving the usability of crystal-free SoCs, such as the Single-Chip Micro Mote, or SCµM. SCµM ( Maksimovic et al. 2019 ; Lovell et al. 2024 ) is an attempt to design a monolithic SoC and aims to minimize the cost per device. Current iterations of SCµM only require two external components (a power source and an antenna) to operate and feature a fully capable IEEE 802.15.4 transceiver, ARM Cortex M0 core, 128 kB of SRAM, optical boot loader, and a variety of additional circuitry to interface with sensors. All clocks and RF signals on SCµM are generated using free-running on-chip oscillators. Traditional wireless systems utilize an off-chip crystal oscillator reference, calibrating the on-chip oscillators from the crystal using a Phase-Locked Loop (PLL). External crystal oscillators are antithetical to the design goals of SCµM, as they increase device cost and power consumption. As a result, the oscillators used by SCµM are less precise and reliable than those of traditional devices, although they are fully compatible with existing wireless protocols with the use of calibration techniques ( Burnett et al. 2021 ; Moreno and Pister 2022 ; Chang et al. 2022 ) . Crystal-free devices operating in the 2.4 GHz ISM band using BLE-like wireless protocols ( Alghaihab et al. 2020 ; Zhao et al. 2021 ; Shen et al. 2025 ) have been published, though to our knowledge, a crystal-free BLE transceiver has not yet been demonstrated. The development of crystal-free devices like SCµM has been difficult due to the lack of existing design tools with low-level access, making pre-silicon validation challenging and increasing the likelihood of flawed or failing devices designed using these architectures. These are unacceptable risks when cost is the primary concern for these devices. With the motivation of creating a development platform suitable for crystal-free device design in mind, our goals for this system are as follows. We are only aiming for BLE revision 4.0 PHY- and MAC-layer designs. Newer BLE revisions require an initial connection to be made on the 4.0 PHY, and higher layers of the stack are less dependent on the particular device architecture and are predominantly programming exercises rather than device design. Open-source BLE stacks such as BlueKitchen ( BlueKitchen 2025 ) are available to implement the rest