Towards terahertz excitons in hydrogenated graphene superlattices Preprint: APS/123-QED

V. A. Saroka, O. Pulci, M. D’Alessandro · 2026

Read Towards terahertz excitons in hydrogenated graphene superlattices Preprint: APS/123-QED by V. A. Saroka, O. Pulci, M. D’Alessandro (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-24027.txt.

Introduction

Saroka, Pulci, and D'Alessandro model the optical response of hydrogenated graphene superlattices, narrow strips where metal and non-metal regions swap places through hydrogenation of chosen areas. Using first-principles methods with excitonic effects, they find surface engineering can produce strong, lone absorption peaks in the far infra-red, maybe reaching terahertz range. Band-gap scaling, they add, suggests no exciton insulators form.

Catalog record

CREATORV. A. Saroka, O. Pulci, M. D’Alessandro
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE22585
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.24027

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Towards terahertz excitons in hydrogenated graphene superlattices Preprint: APS/123-QED V. A. Saroka, O. Pulci, M. D’Alessandro Abstract Carbon nanostructures, such as nanotubes and graphene nanoribbons, exhibit unique electronic and optical properties that make them very promising candidates for terahertz components. However, carbon nanotube and nanoribbon monolithic on-chip integration is challenging because it may results in significant change of their intrinsic properties after an embedment into a substrate. We investigate with first principles theoretical methods the successful routes of such integration and calculate electronic and optical properties of the integrated structures – two-dimensional graphene superlattices, where quasi-metallic and dielectric regions alternate by selective hydrogenation of graphene. It is shown that chemical engineering of the graphene surface can lead to strong and well-isolated excitonic absorption peaks in the far-infrared and possibly even terahertz frequencies. I Introduction Despite the latest advances in terahertz (THz) technology, we still lack a proper THz hardware infrastructure for communication: emitters, detectors, modulators etc., especially in miniaturized form 13 ; 41 . The commercial and even best lab devices are bulky and heavy, therefore, new materials and designs are needed to increase the practicality of THz sources and detectors. There are several typical ways of generating THz radiation. In semiconductor sources, the generation is based on a transient photocurrent, whereby charge carriers, excited by a laser pulse, produce THz radiation after acceleration by an external electric field. In heterostructure lasers, THz radiation is generated by the intersubband transitions of a series of electrically biased semiconductor quantum wells. Such devices themselves are relatively compact and portable, but in fully equipped arrangement scales to tens of centimeters, weighting about tens of kilograms. The route to harnessing THz radiation for compact devices is seen in the usage of carbon nanostructures as building blocks for detectors, emitters etc. 26 Experiments on single-walled carbon nanotubes (SWCNT) report THz radiation 76 ; 6 . The mechanism of THz emission in these experiments is the same transient photocurrent as in semiconducotr sources. However, a much better approach of generating THz radiation is to use interband optical transitions similar to those in quantum cascade lasers 17 . Conventional semiconductors such as GaAs have band gaps in IR-visible region ( 1-2 eV), therefore bandstructure engineering with quantum wells biased by the electric field is needed to tune the energy level difference to 1-10 meV ( 0.3-2.5 THz). In contrast to this, SWCNTs can not only be semiconducting with band gaps of 0.6-2 eV but also be quasi-metallic with intrinsic energy gaps of 1-40 meV ( 0.25-10 THz) 53 ; 46 ; 16 . The band gap in quasi-metallic tubes is opened by the intrinsic strain owing to the curvature of the tube surface 36 ; 37 ; 38 . The interband transitions across the strain induced band gap in quasi-metallic SWCNTs is a natural mechanism for generation of THz radiation allowing one to avoid designing of quantum well cascade 58 ; 42 ; 68 ; 67 ; 69 ; 29 ; 71 ; 43 . The transverse size of SWCNTs ( \sim 1 nm) is much smaller than that of the quantum well, which promises higher density of active elements and associated source brightness or detector sensitivity. A similar mechanism is available in monolayer graphene nanoribbons (GNRs), where the intrinsic strain opens the band gap via edge relaxation 75 ; 82 ; 24 . In many cases such structures share equivalent or similar physical properties 80 ; 59 ; 72 ; 73 ; 56 ; 54 ; 70 . This similarity stems from a well-known energy level matching between cyclic and line molecules 18 , although it does not necessarily extend to higher levels of theory (accounting for many-body and/or intrinsic strain effects) or higher level properties such as optical ones 55 . In more complex systems such as GNRs and SWCNTs, the similarity is better understood via the topological properties of the Dirac point in graphene 5 , which preserve electronic energy bands and velocity operator matrix element, allowing one to obtain these quantities for tubes and ribbons using the transverse momentum quantization and cutting lines technique 62 ; 79 , as schematically presented in Fig. 1 . The energy dispersion has a conical shape at the Dirac point: E\sim\pm\sqrt{k_{\perp}^{2}+k_{\|}^{2}}\,, (1) while the velocity matrix element has the shape of a topological phase singularity: v_{cv}\sim\dfrac{k_{\perp}}{\sqrt{k_{\perp}^{2}+k_{\|}^{2}}}\,, (2) where k_{\perp,\|} are the electron wave vector projections onto the corresponding axes, which are parallel and perpendicular to the ribbon/tube structure, measured relative to the Dirac point. As can be seen in Eqs. ( 1 ) and ( 2 ), for k_{\perp}=0 , both the energy gap and the velocity matrix element vanish. However, for a small k_{\perp}\neq 0 , the opening of a narrow band gap is accompanied by a prominent peak in the velocity matrix element. This is the origin of the strong optical effect across the intrinsic-strain-induced narrow band gaps in both tubes and ribbons. Figure 1 : The schematics of intrinsic strain effects in metallic SWCNTs and GNRs within cutting-lines technique of the nearest neighbor tight-binding model in graphene. (a) Electronic energy bands of metallic tubes and ribbons obtained by cutting graphene band structure, E , as function of two-dimensional momentum \mathbf{\bm{k}}=\left(k_{\perp},k_{\|}\right) close to the Dirac point (conical spectrum) along the lines of the transverse momentum k_{\perp} quantization. Subpanels 1 and 2 corresponds to the system with and without intrinsic strain, respectively. (b) Same as (a) but applied to the velocity operator matrix element, v_{cv} , as function of two-dimensional momentum \mathbf{\bm{k}}=\left(k_{\perp},k_{\|}\right) around the Dirac point. k_{\|} is the electron momentum along the tube/ribbon translational axis. Here, we aim to implement the same mechanism as described above for tubes and ribbons but in a single graphene membrane altered by selective hydrogenation 10 ; 11 . Such structures can be termed armchair graphene superlattices (AGSLs). They could be obtained with further developments in electron beam de-fluorination/de-hydrogenation 81 or covalent selective patterning 49 . Their primary advantage with respect to tubes and ribbons would be the monolithic structure favorable to device embedment. However, the latter requires a theoretical justification due to the strong dependence of the electronic and optical properties on dimensionality, nanostructure geometry, and differences in nanoscale confinement of charge carries in the nanostructures. This paper is organized as follows: we present the structures in Sec. II , then we consider the optical properties in Sec. III , and finally we summarize our results in Sec. IV . II Structural and electronic properties In what follows, we use a slightly different notation compared to Refs. 10 ; 11 . In Figure 2 , the main structural features and the corresponding notations are presented explicitly. In contrast to Refs. 10 ; 11 , where the structures are labeled by the number of carbon atom pairs in the unit cell of the system, N , we characterize the width of the superlattices ( Ox -dimension of the unit cell) by the number of carbon atom pairs W , which excludes the carbon pairs covered by hydrogen in the unit cell of the superlattice. As shown in Fig. 2 (a), this difference introduces the following relation between N and W -indexes: W=N-1 . Thus, to determine the index of the

Read the complete text