Atmosphere as a steam engine

2026

Read Atmosphere as a steam engine (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-23875.txt.

Introduction

Anastassia Makarieva and Andrei Nefiodov treat Earth's atmosphere as a steam engine, generalizing the Clausius-Clapeyron relation to a column where condensation spans many heights. Their account adds lifting work, condensation expansion work and a correction for incomplete condensation, yielding a global steam power near 4.4 watts per square metre. That figure sits close to an independent atmospheric total near 4.3, and the analysis traces the match to rainfall removing vapor and sustaining the surface pressure gradients that drive low level winds.

Catalog record

YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE83395
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.23875

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Atmosphere as a steam engine Abstract Earth’s atmosphere operates a steam cycle in which water vapor evaporates from the surface, expands, condenses in colder air, and returns as precipitation. The Clausius–Clapeyron law relates the incremental expansion work of saturated water vapor to latent heat converted at a Carnot efficiency corresponding to the temperature difference between evaporation and condensation. We generalize this relation to an atmospheric column in which condensation occurs over a range of heights and derive the expansion work per mole of precipitated water. This includes the gravitational work associated with lifting moist air to the mean condensation height, the expansion work generated by condensation, and a correction for incomplete condensation. Using GPCP v3.3 precipitation and observational constraints on condensation height, we estimate the global steam-engine power as W v = 4.4 ± 0.9 ​ W ​ m − 2 W_{v}=4.4\pm 0.9\penalty\ \mathrm{W\,m^{-2}} . This is close to an independent estimate of total atmospheric power, W = W P + W K ≃ 4.3 ± 0.6 ​ W ​ m − 2 W=W_{P}+W_{K}\simeq 4.3\pm 0.6\penalty\ \mathrm{W\,m^{-2}} , obtained from the gravitational power of precipitation and kinetic energy generation by horizontal pressure gradients diagnosed from MERRA-2. Kinetic energy generation is W K ≃ 3.2 ± 0.3 ​ W ​ m − 2 W_{K}\simeq 3.2\pm 0.3\penalty\ \mathrm{W\,m^{-2}} , of which at least two thirds is generated in the lower atmosphere. The smaller upper-atmospheric contribution is dominated by temperature-related pressure gradients and is comparable to Lorenz available potential energy generation. We argue that the agreement between steam-engine and atmospheric power is physically linked to condensation and precipitation fallout. By removing water from the atmospheric gas phase and enabling column-mass redistribution, precipitation can maintain surface pressure gradients that drive cross-isobaric flow in the frictional lower atmosphere. The steam-engine framework thus provides a thermodynamic basis for condensation-induced atmospheric dynamics and identifies a major lower-atmospheric power pathway associated with water phase transitions. \Author [1,2]Anastassia M.Makarieva \Author [1,2]Andrei V.Nefiodov 1]Theoretical Physics Division, Petersburg Nuclear Physics Institute, Gatchina 188300, St. Petersburg, Russia 2]Institute for Advanced Study, Technical University of Munich, Lichtenbergstrasse 2 a, D-85748 Garching, Germany 3]Biotic Pump Greening Group Institute, São José dos Campos, Brazil \correspondence A. M. Makarieva ([email protected]) \pubdiscuss \published † † firstpage: 1 \introduction In a heat engine with a non-condensable working fluid, the work output equals the difference between the work done during expansion and the work required for compression. A steam engine differs in an essential way: compression of the working fluid is accomplished by condensation, so that no external mechanical work is required to return the vapor to the liquid phase. The useful work is therefore associated with the expansion of steam. This interpretation is already contained in the Clausius–Clapeyron equation. Usually written as \frac{dp_{v}^{*}}{dT}=\frac{\mathcal{L}p_{v}^{*}}{RT^{2}}, (1) it can also be expressed as \frac{RT}{p_{v}^{*}}dp_{v}^{*}=\mathcal{L}\frac{dT}{T}, (2) where p_{v}^{*} is the saturated water vapor pressure, T is temperature, R is the universal gas constant, and \mathcal{L} is the molar latent heat of vaporization (J mol -1 ). We denote the corresponding mass-specific latent heat (J kg -1 ) by L=\mathcal{L}/M_{v} , where M_{v} is the molar mass of water. In this form, the equation relates the expansion work of saturated vapor to latent heat converted at Carnot efficiency. This thermodynamic interpretation is not the usual one in modern meteorological textbooks, where the Clausius–Clapeyron equation is typically derived from the equality of Gibbs free energies, or chemical potentials, of the liquid and vapor phases ( Iribarne and Godson 1981 ; Curry and Webster 1999 ; Andrews 2010 ; Holton and Hakim 2013 ; Satoh 2014 ; Bohren and Albrecht 2023 , e.g.,) . The alternative Carnot-cycle derivation ( Brunt 1934 ; Landau et al. 1967 ; Wallace and Hobbs 2006 ; Feynman et al. 2011 , e.g.,) considers an infinitesimal cycle, whose net work is \Delta V\,\Delta p_{v}^{*} . With negligible liquid volume and ideal vapor, \Delta V\simeq RT/p_{v}^{*} . Equating this to \mathcal{L}\,\Delta T/T gives Eq. ( 2 ). Equation ( 2 ) provides a starting point for estimating the expansion work performed by water vapor in the Earth’s atmosphere. Because atmospheric condensation occurs over a range of heights and temperatures, this work must be weighted by the amount of vapor condensing at each height. The resulting steam-engine power can then be compared with kinetic energy generation by atmospheric pressure gradients. The atmospheric heat engine is commonly conceptualized as operating between the highest temperatures, which occur near the Earth’s surface at low latitudes, and the lowest temperatures, found at high latitudes and in the upper atmosphere ( Brunt 1934 ; Peixoto and Oort 1992 ; Bohren and Albrecht 2023 ) . However, the rate of kinetic energy generation by the atmospheric heat engine remains poorly constrained. Among more recent estimates, Pauluis and Dias 2012 stated that the total power associated with atmospheric motions is not known precisely but is likely on the order of 5\penalty\ \mathrm{W\,m^{-2}} . Pauluis 2015 cited the results of Laliberté et al. 2015 as supporting this magnitude. In contrast, Bohren and Albrecht 2023 reported a broader range of 2 – 5\penalty\ \mathrm{W\,m^{-2}} , whereas Kleidon 2021 argued, on theoretical grounds, that the rate should not exceed 2\penalty\ \mathrm{W\,m^{-2}} . A related uncertainty concerns the relative contributions of horizontal and vertical temperature differences, and their associated heat fluxes, to the generation of kinetic energy by the atmospheric heat engine. Both temperature contrasts are of order several tens of kelvin, implying a Carnot efficiency near 10\% , a commonly cited estimate ( Peixoto and Oort 1992 ; Pauluis and Dias 2012 ; Bohren and Albrecht 2023 ) . The poleward heat flux, which reaches about 40\penalty\ \mathrm{W\,m^{-2}} at its maximum, could at most sustain several watts per square metre of power. However, it is difficult to justify the existence of a Carnot cycle in this case, since the horizontal air motion connecting the effective heat source and sink is never adiabatic. In the vertical direction, the combined sensible and latent heat fluxes amount to approximately 100\penalty\ \mathrm{W\,m^{-2}} , but the efficiency of the atmospheric heat engine appears to be about a factor of two lower than the nominal Carnot value ( Pauluis 2015 ) . An alternative perspective was proposed already by Heinrich Hertz in 1855. He suggested that the atmosphere operates as a steam engine, with an efficiency determined by the mean temperature difference between evaporation and condensation, which he estimated to be about 15\penalty\ \mathrm{K} ( Mulligan and Hertz 1997 ) . For T\simeq 300\penalty\ \mathrm{K} , this corresponds to an efficiency of approximately 5\% . Using a latent heat flux of 80\penalty\ \mathrm{W\,m^{-2}} , corresponding to a global mean precipitation rate of 1\penalty\ \mathrm{m\,yr^{-1}} , the resulting power output of such a steam engine would be about 4\penalty\ \mathrm{W\,m^{-2}} , well within the range of reported values. In parallel, since 2007, condensation-induced atmospheric dynamics (CIAD) has suggested that condensation and precipitation contribute substantially to atmospheric power by generating surface pressure gradients ( Makarieva et al. 2019 , for a recent review, see) . These ideas have given rise to extensive discussion ( Makarieva et al. 2013b ; Pearce 2020 ) . In particular, the relationship between condensation rate and power generation, while yielding meaningful predictions across diverse meteorological

Read the complete text