Mg II h&k spectral line properties computed using 3D radiative transfer in an enhanced network region simulated with the MURaM-ChE code
P. Ondratschek, D. Przybylski, H.N. Smitha, J. Leenaarts, R. Cameron, S.K. Solanki · 2026
Read Mg II h&k spectral line properties computed using 3D radiative transfer in an enhanced network region simulated with the MURaM-ChE code by P. Ondratschek, D. Przybylski, H.N. Smitha, J. Leenaarts, R. Cameron, S.K. Solanki (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-22916.txt.
Introduction
Ondratschek and five colleagues compute magnesium II h and k spectral line properties with full 3D radiative transfer in an enhanced network region simulated by MURaM-ChE. Their averaged lines roughly match a typical IRIS observation, though peak separation runs slightly low. The gap between 1.5D and 3D results exceeds that in the public Bifrost snapshot, partly because horizontal velocities enter full 3D synthesis. The 3D lines match observations better in core intensity and spatial distribution.
Catalog record
| CREATOR | P. Ondratschek, D. Przybylski, H.N. Smitha, J. Leenaarts, R. Cameron, S.K. Solanki |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 64469 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.22916
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mg II h&k spectral line properties computed using 3D radiative transfer in an enhanced network region simulated with the MURaM-ChE code P. Ondratschek, D. Przybylski, H.N. Smitha, J. Leenaarts, R. Cameron, S.K. Solanki Abstract Context. Synthetic spectral lines from radiation-magnetohydrodynamic models are essential to interpret the observations of the solar chromosphere, but only a few computations in the literature take 3D effects in the synthesis into account. The Mg II h&k lines form in the middle to upper chromosphere and are well-suited to study the structure of the chromosphere. However, the details of their formation in the solar chromosphere are not fully understood. Aims. We aim to study the effects of 3D rt ( rt ) on the Mg II h&k line properties and to verify known correlations between the underlying atmosphere and spectral line features in a new model of the chromosphere. Methods. We forward model the Mg II h&k lines in 3D rt with partial frequency redistribution (PRD) in a self-consistent 3D radiative magnetohydrodynamics (rMHD) simulation with non-local-thermodynamic-equilibrium (NLTE) energy transport and non-equilibrium (NE) hydrogen ionization of an en ( en ) region simulated with the muramche ( muramche ). We compare the spectra computed with 3D RT to those computed with 1.5D RT and to observations from the Interface Region Imaging Spectrograph (IRIS). Furthermore, we test correlations between the spectral line properties and underlying atmospheric properties such as temperature and velocity structure. Results. The spatially averaged Mg II h&k spectral lines computed with 3D RT match approximately a typical IRIS observation, which includes quiet sun and network elements. The peak separation, is however, still slightly lower in the simulation. In contrast, the 1.5D RT spectra tend to overestimate the peak intensities and the central minimum significantly. In the muramche model, the qualitative difference between 1.5D and 3D RT results is even more pronounced than in the public Bifrost snapshot, as given in the literature. We found that this large discrepancy might partly be attributed to the horizontal velocities that are naturally included in the full 3D rt synthesis but not in typical 1.5D rt computations. We confirm that correlations between spectral line properties and the underlying atmosphere from the MURaM-ChE simulation are similar to those obtained from Bifrost, but show more scatter due to the more dynamic atmosphere. In addition to already known correlations, we found that the k 2 v \mathrm{k_{2v}} (blue) peak of the Mg II k line forms preferably in upflows whereas the k 2 r \mathrm{k_{2r}} (red) peak forms preferably in downflows. Conclusions. The Mg II h&k lines computed with 3D RT match the observations better in the core intensities and their distribution on the Sun compared to 1.5D computations. This underlines the importance of 3D RT in the forward modeling of Mg II h&k. LTE local thermodynamic equilibrium RTE radiative transfer equation TE thermodynamic equilibrium NE nonequilibrium NLTE non-LTE SE statistical equilibrium LOS line-of-sight EoS equation of state CRD complete frequency redistribution PRD partial frequency redistribution RH1.5D Rybicki & Hummer 1.5D RT code RT radiative transfer MHD magnetohydrodynamics rMHD radiaton-MHD IRIS Interface Region Imaging Spectrometer MURaM MURaM MURaM-ChE chromospheric extension of MURaM CLV center-to-limb variation EUV extreme ultra violet NIR near-infrared NUV near-ultraviolet UV ultraviolet ALI approximate Lambda iteration ff free-free QS quiet Sun SOUP Solar Optical Universal Polimeter SST Swedish 1\,\mathrm{m} Solar Telescope CHROMIS CHROMospheric Imaging Spectrometer GONG Global Oscillation Network Group DOT Dutch open telescope AR active regions fb free-bound bf bound-free EN enhanced network FOV field-of-view ROI region of interest bb bound-bound FWHM full width at half maximum SSD small-scale dynamo FTS Fourier Transform Spectrograph GL Gauß-Legendre 1 Introduction The solar chromosphere is an interface between the underlying photosphere and the corona above. The causes of many phenomena such as the heating of the chromosphere ( 43 , e.g.,) , or the strong dynamics it displays are not understood. Additionally, the evolution of fine structures such as spicules, their interaction with the magnetic field, and their role in supplying mass and energy to the corona are under debate ( 7 ) . Inference of physical quantities such as temperature, velocity, density, and magnetic field is limited through a few strong spectral lines forming in the chromosphere. Because of the decreasing density with height, spectral line formation in the chromosphere is subject to nlte ( nlte ) conditions. In addition, some strong resonance lines such as Ca ii H & K and Mg II h&k show prd ( prd ) effects through scattering ( 26 , e.g.) . Furthermore, already in the 1980s it became clear from Lyman \alpha observations that the chromosphere is inhomogeneous and plane-parallel modeling is only a zeroth-order approximation ( 4 , e.g.,) . Only recently has it become possible to model chromospheric lines including both, a 3D model atmosphere and 3D rt . Examples are the Ca ii \lambda 854.2 nm line ( 20 ) , H \alpha ( 21 ) , Mg II h&k ( 23 ) and ( 40 , with a prd treatment,) , and Ca ii H & K ( 3 ) . An alternative to the computationally expensive 3D rt computations is 1.5D rt . In this approximation, the spectral lines are computed from a 3D atmosphere model, but each vertical column is treated as an independent plane-parallel atmosphere. Two main strategies are used to interpret observations. Inversions aim to reconstruct an atmosphere model to fit an observed spectral line profile. However, the model atmospheres are kept relatively simple, and the solution is not always unique. In other words, different model atmospheres may lead to very similar spectral line shapes ( 12 ; 10 , for reviews of inversions see eg,) . In addition, fudge parameters such as microturbulence are introduced to fit the observed line widths, while the actual velocity structure remains unresolved. Inversion codes solve the rt problem, but they are generally restricted to 1.5D rt as their calculations can easily become expensive, although approaches to take 3D rt effects in inversions into account exist ( 39 ) . The other main strategy is based on forward modeling. In the first step, a model of the solar atmosphere is simulated. In the second step, detailed rt computations are conducted post-processing. In contrast to inversions, forward modeling does not aim to exactly reproduce a single observation. The advantage is, however, that through the knowledge of all quantities in the atmosphere, line formation can be studied in detail. By comparing the atmosphere with the resulting spectra, possible correlations can be identified, which can be used to interpret observations without performing inversions. In this paper, we concern ourselves with the Mg II h&k lines. A typical line profile of Mg II k observed in the qs ( qs ) shows a double-reversed line core. The inner wings, which are the minimum intensities before the first reversal are called \mathrm{k_{1v}} and \mathrm{k_{1r}} , where the “v” indicates the blue or violet and “r” the red part of the spectrum with respect to the rest wavelength. The peaks are similarly labeled \mathrm{k_{2v}} and \mathrm{k_{2r}} . The central reversal is called \mathrm{k_{3}} . The Mg II h line shows similar properties as Mg II k and has therefore analogous labeling. These spectral