Monte Carlo simulation of selective adsorption in a binary hard-disk mixture on patterned adhesive surfaces
Nazar Kukarkin, Taras Patsahan, [0.5em] Yukhnovskii Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine1 Svientsitskii Str., 79011 Lviv, Ukraine · 2026
Read Monte Carlo simulation of selective adsorption in a binary hard-disk mixture on patterned adhesive surfaces by Nazar Kukarkin, Taras Patsahan, [0.5em] Yukhnovskii Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine1 Svientsitskii Str., 79011 Lviv, Ukraine (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-20882.txt.
Introduction
Kukarkin and Patsahan study selective adsorption in a 2D binary hard-disk mixture on patterned adhesive surfaces. They use grand canonical Monte Carlo simulations for this study. The two species share equal diameters and equal bulk chemical levels but differ in attraction to sticky domains. That design separates affinity-driven selectivity from size asymmetry and unequal levels. Results show selectivity depends strongly on surface shape, most of all at low and mid levels, with clear trends across the range.
Catalog record
| CREATOR | Nazar Kukarkin, Taras Patsahan, [0.5em] Yukhnovskii Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine1 Svientsitskii Str., 79011 Lviv, Ukraine |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 33474 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.20882
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Monte Carlo simulation of selective adsorption in a binary hard-disk mixture on patterned adhesive surfaces Nazar Kukarkin, Taras Patsahan, [0.5em] Yukhnovskii Institute for Condensed Matter Physics of the National Academy of Sciences of Ukraine1 Svientsitskii Str., 79011 Lviv, Ukraine Abstract Selective adsorption in a two-dimensional model of a binary hard-disk mixture on patterned adhesive surfaces is studied using grand canonical Monte Carlo simulations. The two species have equal diameters and equal bulk chemical potentials, but different attraction strengths to adhesive domains. Thus, affinity-driven selectivity is separated from particle-size asymmetry and unequal chemical potentials. The surface pattern is defined by domain size, domain surface coverage, and ordered or disordered arrangement of circular domains. The results show that selectivity depends strongly on surface geometry, especially at low and intermediate chemical potentials. Domains comparable to the particle size enhance selectivity by forming adsorption regions with large particle–domain overlap, whereas larger domains can provide high selectivity at low chemical potentials. For small domains, further reduction in size can also increase selectivity as the system approaches a uniform attractive surface with corresponding effective affinity parameters of the species. 1 Introduction Adsorption of micro- and nanoscale particles on chemically patterned surfaces is a fundamental problem in interfacial science, soft matter physics, and materials engineering. Patterned substrates provide a means of controlling both the total amount of adsorbed particles and their spatial organization at the surface. This is important for the design of functional coatings, colloidal assembly templates, biosensors, protein and nanoparticle arrays, and platforms for controlled attachment of biological objects such as cells [ 1 , 2 , 3 , 4 , 5 , 6 ] . In such systems, adsorption is determined by an interplay between energetic and geometric factors: particles are attracted to favourable surface regions, while their lateral arrangement is constrained by excluded volume interactions and by the spatial distribution of adhesive sites. The influence of surface heterogeneity has been studied in a variety of model and experimental systems. In polymer adsorption, Monte Carlo simulations have shown that the size of chemically distinct surface domains can strongly affect adsorption and ordering. In particular, efficient adsorption may occur when the domain size is comparable to the characteristic size of the adsorbing object or its structural units [ 7 , 8 ] . Related theoretical work has shown that stochastic surface heterogeneity can also enhance adsorption by creating a distribution of favourable local environments [ 9 ] . Simple lattice and continuum models of adsorption on heterogeneous substrates further demonstrate that the concentration, spatial arrangement, and geometry of active sites can strongly influence adsorption isotherms, local ordering, and surface coverage [ 10 , 11 , 12 ] . Irreversible particle deposition and random sequential adsorption on patterned or heterogeneous surfaces represent another important class of related problems. In these models, the adsorbed particles usually remain fixed after deposition, so that the final structure is controlled by surface blocking and packing constraints. Such studies have shown that substrate patterning can significantly modify the approach to the jamming limit, the morphology of deposited layers, and the crossover between lattice-like and continuum-like behaviour [ 13 , 14 , 15 , 16 , 17 ] . Although these models describe irreversible rather than equilibrium adsorption, they provide important physical insight into the role of surface geometry and excluded volume effects in the formation of adsorbed layers. Multicomponent adsorption on heterogeneous surfaces is of particular interest because, in many practical situations, different adsorbates compete for the same surface regions. In such systems, the adsorption behaviour is determined not only by the properties of the individual components, but also by the way the available adsorption sites are distributed between them. Adsorption of binary mixtures on heterogeneous surfaces has been investigated using a range of theoretical and simulation approaches, including lattice models, integral equation methods, cluster approximations, and Monte Carlo simulations [ 18 , 19 , 20 ] . These studies have shown that surface heterogeneity, lateral interactions, and differences in adsorption energy between species can strongly affect adsorption isotherms, the composition of the adsorbed layer, and surface ordering. Binary and multicomponent particle mixtures have also been studied in the context of irreversible deposition. Random sequential adsorption of two component mixtures of disk particles has been used to analyze how the particle size ratio and relative adsorption rates affect the jamming coverage and the composition of the deposited layer [ 21 ] . Competitive adsorption of particles with different shapes, such as disks and discorectangles, has shown that mixtures may exhibit packing and percolation behaviour that cannot be inferred from the corresponding one component systems [ 22 ] . Other studies of binary hard core particles on lattices have addressed the relation between adsorption kinetics, surface diffusion, and thermodynamic properties [ 23 ] . These works highlight the general importance of competition between different adsorbing species, but they are often focused on irreversible deposition, lattice models, or mixtures with different particle sizes or shapes. Selective adsorption is especially important when different particles have different affinities to a structured surface. This situation is common in systems involving functionalized nanoparticles, polymer brush surfaces, affinity sensors, proteins, and cells [ 24 , 25 , 26 , 27 , 28 ] . For example, patterned or chemically structured surfaces can be used to enhance adsorption efficiency, to guide the spatial organization of nanoparticles or biomolecules, and to promote preferential attachment of selected biological objects. However, in real systems, selectivity is usually affected by several factors at once, including particle size, shape, charge, deformability, specific binding, and kinetic effects. Therefore, minimal statistical mechanical models are useful for separating the energetic and geometric contributions to selective adsorption. In our previous study, equilibrium adsorption of a one component system of hard disks on patterned adhesive surfaces was investigated using Monte Carlo simulations [ 29 ] . The adhesive domains were arranged either on a square lattice or in a disordered configuration, and the attraction between a particle and a domain was assumed to be proportional to their overlap area. It was shown that adsorption is controlled not only by the total surface coverage of adhesive domains, but also by their size and spatial arrangement. The most pronounced geometric effect was observed when the domain size was comparable to the particle size. In this case, favourable locations in which a particle strongly overlaps with an individual domain noticeably affected the adsorption isotherms and the structure of the adsorbed layer. At high particle coverages, however, the influence of the surface pattern became weaker because excluded volume and particle packing started to dominate [ 29 ] . The next step is to extend this model to mixtures. In the present work, we consider a binary mixture of hard disks adsorbed on a patterned adhesive surface. We assume that the two species of particles have the same diameter and the same chemical potential in the bulk. Thus, they are identical with respect to hard-core interactions and have the same probability of exchange with the bulk reservoir. They differ only in the strength of their attractive interaction with the adhesive domains. This formulation isolates affinity-driven selectivity from other effects. Since the bulk mixture does not favour either component, the symmetry between the two species