Towards compact high-frequency nonreciprocal devices using nanoplasma-switched time-varying metasurfaces Preprint: APS/123-QED

Mikhail Sidorenko, Jin Zhang, Xuchen Wang, Zhipei Sun, Sergei Tretyakov, Viktar Asadchy · 2026

Read Towards compact high-frequency nonreciprocal devices using nanoplasma-switched time-varying metasurfaces Preprint: APS/123-QED by Mikhail Sidorenko, Jin Zhang, Xuchen Wang, Zhipei Sun, Sergei Tretyakov, Viktar Asadchy (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-20836.txt.

Introduction

Mikhail Sidorenko and five colleagues design compact high-frequency one-way devices using nanoplasma-switched time-varying metasurfaces. Time-modulated systems can tailor rate conversion and single-direction propagation, but microwave varactors are limited to a few billion cycles per second of tuning. These switches, two-state devices based on gas discharge in a nanometre-scale gap, open higher operating rates. An analytical design based on the time-Floquet method yields an isolator at 100 gigahertz, studied by maths and by full-wave simulation.

Catalog record

CREATORMikhail Sidorenko, Jin Zhang, Xuchen Wang, Zhipei Sun, Sergei Tretyakov, Viktar Asadchy
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39076
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.20836

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Towards compact high-frequency nonreciprocal devices using nanoplasma-switched time-varying metasurfaces Preprint: APS/123-QED Mikhail Sidorenko, Jin Zhang, Xuchen Wang, Zhipei Sun, Sergei Tretyakov, Viktar Asadchy Abstract Time-modulated systems have received growing interest in recent years. They allow us to tailor effects, such as frequency conversion, single-direction propagation, etc. For the microwave band, semiconductor elements, such as varactors, are usually used as time-modulated elements but their modulation frequency has been limited to the few-gigahertz range. Recent advances in nanoplasma switches, i.e., two-state electronic switches based on a gas discharge in a nanometer-scale gap, provide a new potential for developing time-modulated systems with high operating frequencies. Here, we develop an analytical framework based on the time-Floquet method for the design of nonreciprocal time-modulated devices based on two-state time-modulated elements, for instance, nanoplasma-based switches. A practical example of a microwave isolator operating at 100 GHz frequency is developed and studied both analytically and using full-wave simulations. A potential realization in a parallel-plate waveguide is also simulated numerically. I Introduction Electromagnetic Lorentz reciprocity is a fundamental symmetry of Maxwell’s equations. It states that in linear, time-invariant, and passive media governed by time-reversal-symmetric equations, the transmission characteristics between two points remain unchanged when the positions of the source and receiver are interchanged. This principle defines the behavior of most conventional antennas, waveguides, and scattering systems. Violation of Lorentz reciprocity arises when these conditions are broken, for example, by magnetic field biasing, temporal modulation, or nonlinear interactions, enabling direction-dependent wave propagation 1 ; 2 . Such nonreciprocal electromagnetic responses have enabled a range of applications, including isolators and circulators, unidirectional antennas and metasurfaces, and topological photonic devices. Microwave isolators form a particular class of nonreciprocal devices. They are two-port devices designed to provide unidirectional power transmission at the prescribed frequency band. Microwave isolators are widely used in many practical applications, such as mobile and satellite communications and radar systems. A typical commercial isolator is based on ferrite materials and provides about 20\,\mathrm{dB} isolation with an insertion loss often less than 1\,\mathrm{dB} 17 . Ferrite materials provide nonreciprocal behavior under an external biasing magnetic field. However, in some applications, magnetic materials are undesirable for a wide class of reasons. For such applications, magnetless isolators have been developed for several decades. They can be based on active elements, semiconductor frequency mixers 15 , nonlinear effects 25 , time-modulated resonators 8 or topological effects 27 . In all nonreciprocal systems based on time modulation, the choice of the time-modulated element is critical. For microwave implementations, PIN diodes, varactor diodes, and MOSFET switches are commonly employed 7 ; 29 ; 21 ; 5 . However, achieving large modulation depths of capacitance or conductance at high modulation rates with available components remains highly challenging. Varactor-based nonreciprocal filters and circulators typically operate with modulation frequencies in the 10^{7}\text{--}10^{8}~{\rm Hz} range 3 ; 4 , whereas integrated CMOS transistor-switch implementations can reach modulation frequencies in the 10^{8}\text{--}10^{9}~{\rm Hz} range 5 . These limitations not only restrict performance well below the frequency regimes targeted by many next-generation platforms, but also significantly hinder the scalability of time-modulated isolators to higher-frequency bands. Nonreciprocal behavior can also be achieved with modulation frequencies several orders of magnitude lower than the signal frequency by employing traveling-wave spatiotemporal modulation. However, such demonstrations have required extremely long modulation sections, sometimes extending over thousands of wavelengths 12 . While this approach is feasible in optical platforms, it is generally impractical at microwave frequencies due to prohibitive physical dimensions. On the other hand, recent progress in the plasma community, particularly the emergence of nanoscale plasmas (nanoplasmas), has revealed a promising route toward high-frequency time-varying microwave systems. Enabled by advances in nanofabrication, nanoplasma discharges can be driven on picosecond timescales and potentially faster 19 ; 18 ; 33 ; 31 ; 32 ; 34 . A nanoplasma discharge is a plasma discharge formed in an ultrashort gap, where the electrode separation is on the order of a few micrometers or even hundreds of nanometers. In such a gap, the discharge ignition process is mainly driven by field emission effect electrons. Due to the very small gap size, the electric field strength is high, and electrons can leave the cathode under normal conditions without additional heating. This process is called electron field emission and is described by the Fowler-Nordheim equation 9 . Although the maximal current provided by this effect is extremely small under realistic conditions, the emitted electrons start avalanche ionization, and the nanoplasma discharge is ignited at a time scale of picoseconds or less. Thus, a nanoplasma discharge can be regarded as an ultrafast electronic switch 19 with two distinct states, ON and OFF, thereby providing a time-modulated conductance that can potentially reach modulation speeds up to the few-THz range. To date, reported applications of nanoplasma have been largely focused on ultrafast switching for THz pulse generation 19 ; 32 and on creating time interfaces in wire media with strong spatial dispersion 24 ; 23 ; 22 , while its potential as an enabling mechanism for nonreciprocal devices has not yet been explored. In this article, we propose the use of nanoplasma for creating high-frequency magnetless nonreciprocal components with a compact overall size. We show both theoretically and numerically a design of an isolator operating at a frequency of 100 GHz formed by cascading only two time-modulated metasurfaces whose equivalent sheet conductances are driven at the same modulation frequency but with a controlled relative phase. Each metasurface comprises a periodic array of metallic strips loaded by nanoplasma discharge gaps, enabling a stepwise (binary) temporal modulation of the sheet impedance. This switching modality leads to an analytical treatment and an equivalent-circuit description that strongly differ from prior harmonic time-modulated nonreciprocal metasurface implementations relying on semiconductor tuning elements. We further propose a compact realization of the isolator in a parallel-plate waveguide and verify it using full-wave simulations, demonstrating an isolation of 23 dB with an insertion loss of 2 dB for a total device thickness below 1.8 wavelengths. Overall, the proposed nanoplasma-based approach provides a new pathway toward nonreciprocal components operating at millimeter-wave frequencies and beyond. II Theory II.1 Static metasurface: grid of strips Let us consider an infinite flat array of periodic parallel strips of width w in the plane z=\mathrm{const} (see Fig. 1 a), with the period d\gg w , and the thickness of the strips much smaller than w . For an x -polarized plane wave with the circular frequency \omega_{0} and the corresponding wavelength \lambda=2\pi c/\omega_{0}\gg d propagating in the z direction, an analytic formula for the reflection and transmission coefficients is obtained with the help of an equivalent circuit model presented in Fig. 1 c. For ideally conducting strips, the equivalent surface impedance of the grid is defined by its effective inductance and impedances of the periodically inserted loads 26 : Z_{G}=Z_{L}d+j\omega_{0}L_{\mathrm{s}}=Z_{L}d+j\omega_{0}\frac{d\mu_{0}}{2\pi}\log{\frac{1}{\displaystyle\sin{\frac{\pi w}{2d}\ \ }},} (1) where Z_{L} is the load impedance per unit length, and j is the imaginary unit. Figure 1: a) A schematic view of a strip grid; b) a schematic view of a strip grid switched by nanoplasma discharges; c) an equivalent circuit scheme of a strip grid; d) an equivalent circuit scheme of a time-switched strip grid; e) a time modulation function of R_{\mathrm{m}}(t) . The ABCD

Read the complete text