Evaluating Blended Refrigerants for Thermochemical Energy Storage and Circular Refrigerant Recovery using Activated Carbons
H. Lucassen, A. Luna-Triguero, J. M. Vicent-Luna · 2026
Read Evaluating Blended Refrigerants for Thermochemical Energy Storage and Circular Refrigerant Recovery using Activated Carbons by H. Lucassen, A. Luna-Triguero, J. M. Vicent-Luna (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-20446.txt.
Introduction
Lucassen and two co-workers screen blended refrigerants in activated carbons for heat storage and refrigerant recovery. Adsorption storage packs high energy density and pairs well with renewable heat. Their workflow mixes Monte Carlo simulation, thermodynamic models and breakthrough runs to predict storage and separation from pure-component data alone. Blends beat pure fluids on storage density through cooperative adsorption and tighter packing, while carbons split key blend components.
Catalog record
| CREATOR | H. Lucassen, A. Luna-Triguero, J. M. Vicent-Luna |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 86906 |
| LICENSE | http://creativecommons.org/licenses/by-sa/4.0/ |
| RIGHTS | CC BY SA |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.20446
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Evaluating Blended Refrigerants for Thermochemical Energy Storage and Circular Refrigerant Recovery using Activated Carbons H. Lucassen, A. Luna-Triguero, J. M. Vicent-Luna Abstract The climate crisis demands a rapid shift to sustainable energy technologies and higher efficiency in existing energy systems. Adsorption-based thermochemical energy storage is a promising alternative due to its high energy density and compatibility with renewable heat sources. In this work, we investigate the adsorption behavior of pure refrigerants (R32, R125, R134a, and R600) and their commercial blends (R410A, R407F, R417A, and R417C) in six activated carbons for thermochemical energy storage and circular refrigerant recovery. A multiscale computational workflow combining Monte Carlo simulations, thermodynamic modeling, and breakthrough simulations is developed to predict adsorption, storage, and separation behavior from pure-component adsorption data. The methodology integrates adsorption potential theory (APT), ideal adsorbed solution theory (IAST), and models for the isosteric heat of adsorption. In addition, an in-house computational framework is developed to calculate heats of adsorption and energy storage densities for both pure refrigerants and multicomponent mixtures. Although developed using molecular simulations as a benchmark, the methodology is directly applicable to experimental studies, since it only requires adsorption isotherms of the pure components as input to evaluate the performance of refrigerant blends. The results show that refrigerant blends can achieve higher storage densities than their pure counterparts due to cooperative adsorption and more efficient molecular packing. Furthermore, the activated carbons selectively separate key refrigerant components, highlighting their potential for sustainable refrigerant recovery. Overall, this work provides a general framework for the rational design and screening of next-generation refrigerant blends for adsorption-driven energy storage and separation applications. I Introduction Climate change is one of the most significant challenges facing the 21st century. Concerns regarding global warming emerged during the mid-20th century, culminating in the 2015 Paris Agreement signed by 195 countries 59 . The primary objective of the agreement is to limit global warming to below 2 ∘ C above pre-industrial levels while pursuing efforts to restrict it to 1.5 ∘ C. Achieving these goals requires substantial reductions in greenhouse gas emissions, including carbon dioxide, methane, and fluorinated gases (F-gases), together with the transition toward sustainable energy technologies and improved energy efficiency in existing industrial processes. Refrigerants constitute one of the most widely used classes of F-gases. They are employed as working fluids in heating and cooling systems ranging from domestic to industrial scales in conventional vapor-compression technologies 61 . According to EERA (2022), the implementation of Thermal Energy Storage (TES) technologies in industrial processes could reduce emissions in Europe by up to 513 Mt CO 2 per year by decreasing the environmental impact of industrial heating and cooling, which accounts for nearly 80% of industrial energy consumption 14 . TES also provides an effective strategy for balancing energy supply and demand associated with intermittent renewable energy generation 57 . Among TES technologies, adsorption-based systems, including adsorption heat pumps (AHPs) and adsorption cooling systems (ACSs), are increasingly considered sustainable alternatives to conventional heating and cooling technologies because they operate at lower thermal requirements 30 ; 35 ; 11 ; 66 ; 63 . Refrigerants are attractive working fluids for these systems due to their favorable thermodynamic properties, high energy densities, and strong adsorption compatibility with porous materials 65 ; 44 ; 4 ; 60 ; 48 . Furthermore, adsorption systems operate with significantly smaller refrigerant inventories than conventional vapor-compression systems, reducing their overall environmental impact. Currently, hydrofluorocarbons (HFCs) remain among the most widely used refrigerants despite exhibiting global warming potentials (GWPs) up to 23,000 times larger than that of CO 2 50 . Consequently, the European Union established the objective of reducing F-gas emissions by two-thirds by 2030 50 . Nevertheless, approximately 20,000 tons of HFCs are still produced annually 67 , corresponding to 35–45 Mt of CO 2 -equivalent emissions if released into the atmosphere. To address both environmental and regulatory constraints, industry is transitioning toward fourth-generation refrigerants, primarily consisting of blends of HFCs and hydrofluoroolefins (HFOs). These blends exhibit lower GWPs and improved thermodynamic performance 50 . In addition, they facilitate circular refrigerant management through the recovery and reuse of existing HFCs. Yasaka et al. (2023) reported that refrigerant reclamation produces significantly lower emissions than refrigerant production or destruction, highlighting the importance of refrigerant recovery strategies 67 . However, most refrigerants are still inadequately recovered at end-of-life and are instead released into the atmosphere 9 . The separation of modern refrigerant blends remains challenging because many of these mixtures are azeotropic or near-azeotropic. Conventional recovery methods, such as cryogenic separation, often fail to achieve the purity levels required for industrial reuse 62 . In this context, adsorption-based separation using nanoporous materials has emerged as a promising alternative. This work focuses on two complementary applications of refrigerant adsorption systems: thermochemical energy storage, which requires understanding adsorption thermodynamics and heats of adsorption, and the separation of refrigerant blends for circular recovery, which requires accurate prediction of mixture adsorption and separation dynamics. Among nanoporous adsorbents, metal-organic frameworks (MOFs) 63 ; 11 , zeolites 33 ; 47 ; 36 , and activated carbons (ACs) 10 ; 64 ; 37 are the most commonly investigated materials for adsorption-based energy storage applications. While MOFs often exhibit extremely high surface areas, activated carbons remain attractive due to their stability, scalability, and broad pore-size distributions. Most studies on refrigerant adsorption focus on MOFs and rely primarily on experimental characterization 60 . In contrast, studies addressing refrigerant adsorption in activated carbons, particularly for refrigerant mixtures, remain relatively limited. Adsorption equilibrium and thermophysical properties have been investigated experimentally for several pure refrigerants in activated carbons, including R32 65 , R125 44 , R134a 4 , and R600 48 . Existing studies on refrigerant blends mainly focus either on separation performance for mixtures containing R32, R125, and R134a 46 ; 52 ; 51 ; 53 or on energetic and thermodynamic properties of adsorption 15 ; 2 ; 3 . However, these studies typically investigate only a limited number of adsorbent/adsorbate systems and rarely combine adsorption thermodynamics, storage performance, and separation behavior within a unified framework. Sosa et al. (2020) presented the first systematic experimental study of pure refrigerant components on different activated carbons for the separation of commercial refrigerant blends 52 . They investigated the separation of R410A and R407F on activated carbons using Ideal Adsorbed Solution Theory (IAST) to predict mixture adsorption. Subsequent works extended these analyses to MOFs, zeolitic imidazolate frameworks (ZIFs), and biomass-derived activated carbons 50 ; 53 . These studies demonstrated the potential of porous materials for refrigerant separation and highlighted the superior adsorption capacities of some micro-mesoporous materials under high-pressure conditions. Nevertheless, they remain largely limited to experimental selectivity analyses and do not address adsorption-based energy storage or breakthrough separation dynamics. In parallel, molecular simulation methods have become increasingly important for studying gas adsorption in porous materials. Grand Canonical Monte Carlo (GCMC) simulations are widely regarded as the standard approach for calculating adsorption isotherms in nanoporous systems 13 . In GCMC simulations, temperature, volume, and chemical potential are fixed while the number of adsorbed molecules fluctuates to satisfy thermodynamic equilibrium. Although numerous numerical studies have investigated refrigerant adsorption in MOFs 19 ; 8 ; 27 , comparatively few studies focus on activated carbons because of