Capacity of multimode quantum Gaussian channels

Maria Popławska, Marcin Jarzyna · 2026

Read Capacity of multimode quantum Gaussian channels by Maria Popławska, Marcin Jarzyna (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-19749.txt.

Introduction

Poplawska and Jarzyna derive exact formulas for how much information multimode quantum Gaussian channels can carry. These channels model optical links with many inputs and many outputs, the quantum version of MIMO systems. They show that adding modes under a fixed power limit always helps, and they give an averaged capacity formula for random passive transformations. Matching results follow for homodyne and heterodyne detection, plus a discussion of weak active transformations.

Catalog record

CREATORMaria Popławska, Marcin Jarzyna
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE45005
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.19749

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Capacity of multimode quantum Gaussian channels Maria Popławska, Marcin Jarzyna Abstract We derive explicit formulas for the capacity of multimode quantum Gaussian channels which serve as a fundamental model for optical version of multiple-input multiple-output channels. We show that it is always optimal to increase the number of modes under fixed power constraint. We derive an analytical formula for the ensemble-averaged Holevo capacity in the case of random passive transformations. The analogous results are also obtained for capacities achievable under homodyne and heterodyne detection. We further discuss the generalization of the model to include weak active transformations. I Introduction Optical communication is a key technology for high-capacity information transmission [ 5 ] . Platforms ranging from free-space optical links to modern optical fiber networks enable reliable communication over long distances and at unprecedented data rates [ 24 ] . A key challenge in modern communication is to increase channel capacity without proportionally increasing physical resources such as bandwidth or power. A major breakthrough in radio frequency communications was the development of multiple-input multiple-output (MIMO) systems, which employ multiple transmitting and receiving antennas to significantly increase link capacity [ 23 ] . Analogues of MIMO have since been introduced in optical communications, most notably in the form of Spatial-Division Multiplexing [ 16 ] and Mode-Division Multiplexing [ 17 ] , which exploit multiple spatial or modal degrees of freedom of the optical field. These approaches are typically formulated within a classical framework, where the signal is treated as a continuous waveform [ 15 ] . However, at the fundamental level light is described by the laws of quantum mechanics which on one hand opens new possibilities, such as quantum enhanced measurement strategies, but on the other imposes restrictions e.g. in the form of unavoidable quantum noise. This naturally raises the problem of quantum description of optical MIMO channels, similarly as has been already achieved for single mode case [ 8 , 7 , 22 ] . Within quantum information theory, optical communication links are commonly modelled as bosonic Gaussian quantum channels [ 25 , 4 ] . This framework reflects the widespread experimental use of Gaussian states, such as coherent states generated by laser sources or thermal states, and accommodates the description of typical noise effects as well as multimode transmission. Crucially, using tools from quantum information theory, one can characterize the fundamental limits on information transmission rates in terms of the Holevo bound [ 10 ] . Unlike capacities derived under specific classical detection strategies, such as conventional Shannon-Hartley bound, the Holevo limit provides an upper limit on the accessible classical information for a given quantum channel and input ensemble, corresponding to the optimal quantum measurement strategy [ 1 ] . This allows one to quantify the ultimate performance of optical systems independently of the receiver architecture. The purpose of this work is to extend the fundamental ideas introduced in [ 23 ] , concerning the role of the number of modes and random scattering in the information capacity scaling, to a quantum channel description of optical MIMO communication systems. Specifically, we show that for a channel governed by passive or phase-insensitive operations, one can choose an appropriate encoding basis that decomposes the multimode channel into parallel subchannels. The Holevo information can then be maximized by applying the quantum analogue of the water-filling algorithm [ 20 ] . Under a given input power constraint, increasing the number of modes used for communication enhances the channel capacity. Moreover, for random passive transformations, which are analogous to random signal scattering in radio communication, the expected information capacity can be estimated by analytical formula derived with the ensemble-averaged spectral density. This paper is organized as follows. The mathematical description of multimode optical communication channels in terms of bosonic Gaussian quantum channels is presented in Sec. II . In Sec. III we derive the capacity for general Gaussian multimode channels and give simplified expressions for passive case. Next, random scattering of the signal is modelled as a random passive transformation within the quantum channel formalism and an analytical expression for the expected information capacity is derived in Sec. IV . An extension to weak active transformations is also discussed there. Finally, Sec. V concludes the paper. II Classical and Quantum Multimode Channel Fig. 1: Scheme of a communication link involving a multimode Gaussian quantum channel. The transmitter prepares N signal modes with Gaussian modulation and the receiver receives K modes while the environment consists of M modes that are beyond control by either the transmitter or receiver. The channel couples signal and environmental degrees of freedom through matrices \mathbf{h}_{\textrm{se}} and \mathbf{h}_{\textrm{es}} , resulting in leakage of the signal energy into the environment. The receiver performs possible collective measurements on the output signal modes. II-A Classical communication A basic model for a classical multimode optical channel, presented schematically in Fig. 1 consists of a transformation \mathbf{H}_{\textrm{s}} acting on N optical input modes and returning K output ones. The transmitter and receiver can perform in general correlated modulation and detection across all modes respectively. An optical field in the i-th mode is characterized by two orthogonal quadratures q^{\textrm{s}}_{i} and p^{\textrm{s}}_{i} composing a 2N -dimensional signal quadrature vector \mathbf{r}^{\textrm{s}}=(q^{\textrm{s}}_{1},\dots,q^{\textrm{s}}_{N},p^{\textrm{s}}_{1},\dots,p^{\textrm{s}}_{N})^{\text{T}} which transforms under the multimode channel as \mathbf{r}^{\textrm{s}}_{\textrm{out}}=\mathbf{H}_{\textrm{s}}\mathbf{r}^{\textrm{s}}_{\textrm{in}}+\mathbf{n} , where \mathbf{r}^{\textrm{s}}_{\textrm{in}} and \mathbf{r}^{\textrm{s}}_{\textrm{out}} denote input and output quadrature vectors respectively and \mathbf{n} is an additional displacement that may introduce random noise. The signal is characterized by the covariance matrix \mathbf{V}^{\textrm{s}}=\langle(\mathbf{r}^{\textrm{s}})^{\textrm{T}}\mathbf{r}^{\textrm{s}}\rangle-\langle(\mathbf{r}^{\textrm{s}})^{\textrm{T}}\rangle\langle\mathbf{r}^{\textrm{s}}\rangle which in turn transforms as \mathbf{V}^{\textrm{s}}_{\textrm{out}}=\mathbf{H}_{\textrm{s}}\mathbf{V}^{\textrm{s}}_{\textrm{in}}\mathbf{H}_{\textrm{s}}^{\textrm{T}}+\xi\mathds{1}_{2K} , where \mathbf{V}^{\textrm{s}}_{\textrm{in}} and \mathbf{V}^{\textrm{s}}_{\textrm{out}} denote input and output signal covariance matrices and \xi=\langle\mathbf{n}^{\textrm{T}}\mathbf{n}\rangle represents uniform additive noise that may be additionally introduced by the channel. With the above assumptions, it was shown in [ 23 ] that one may calculate multimode channel capacity by noticing that under singular value decomposition (SVD) of the transformation matrix \mathbf{H}_{\textrm{s}}=\mathbf{U}\mathbf{D}\mathbf{W}^{\textrm{T}} , where \mathbf{U},\mathbf{W} are respectively K\times K and N\times N unitary matrices and \mathbf{D} is diagonal rectangular K\times N matrix containing singular values, the covariance matrix may be written as \tilde{\mathbf{V}}^{\textrm{s}}_{\textrm{out}}=\mathbf{D}\tilde{\mathbf{V}}^{\textrm{s}}_{\textrm{in}}\mathbf{D}+\xi\mathds{1}_{2K}, (1) where \tilde{\mathbf{V}}^{\textrm{s}}_{\textrm{out}}=\mathbf{U}^{\textrm{T}}\mathbf{V}^{\textrm{s}}_{\textrm{out}}\mathbf{U} and \tilde{\mathbf{V}}^{\textrm{s}}_{\textrm{in}}=\mathbf{W}\mathbf{V}^{\textrm{s}}_{\textrm{in}}\mathbf{W}^{\textrm{T}} denote output and input covariance matrices rotated to appropriate mode bases given by \mathbf{U} and \mathbf{W} . Importantly, the rotation transformations \mathbf{U} and \mathbf{W} can be applied by the receiver and transmitter either by physical signal manipulation or by postprocessing. The multimode channel capacity under total power constraint P can be then written as C(P)=\max_{\{P_{k}\}}\sum_{k=1}^{K}\log_{2}\left(1+\frac{\lambda_{k}P_{k}}{\xi}\right), (2) where \lambda_{k}=\mathbf{D}_{kk}^{2} denotes square of the singular value of \mathbf{H}_{\textrm{s}} , P_{k} is the power sent to the k -th singular mode and the maximization is performed over different power distributions that satisfy \sum_{k=1}^{K}P_{k}\leq P . The latter can be done by using water-filling method [ 23 ] , resulting in the formula C(P)=\sum_{k=1}^{K}\left\{\log_{2}\frac{\mu\lambda_{j}}{\xi}\right\}^{+},\quad P=\sum_{k=1}^{K}\left\{\mu-\frac{\xi}{\lambda_{j}}\right\}^{+}, (3) where \mu is a ”water-level” coefficient to be determined from the power constraint on the right and \{x\}^{+}=\max(x,0) . Crucially, note that the capacity in Eq. ( 2 ) is a sum of standard expressions resulting from applying the well known Shannon-Hartley bound to each singular mode. In particular it depends only on the signal to noise ratios in each mode. II-B Multimode Gaussian quantum channels and the Holevo limit In quantum mechanical picture the quadratures become operators and the optical field is described by quantum states

Read the complete text