A Parameterized YSO Accretion Disk Model with Increasing Accretion Rate: Predicted Outburst Lightcurves Journal: ApJ

Gautam Das, Lynne A. Hillenbrand, Adolfo S. Carvalho · 2026

Read A Parameterized YSO Accretion Disk Model with Increasing Accretion Rate: Predicted Outburst Lightcurves Journal: ApJ by Gautam Das, Lynne A. Hillenbrand, Adolfo S. Carvalho (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-19710.txt.

Introduction

Das, Hillenbrand and Carvalho model FU Ori type young stellar objects, which brighten hugely over months to years, then fade over decades. Their parametric model couples stellar surface emission, magnetic accretion shocks, an irradiated dust disk and a heated gas disk. Changing accretion rate profiles mimicking seen outburst shapes drive multi-band light curves and color curves. Red optical and near-infrared light curves mostly follow the input accretion profile, tuned to shock and inner gas disk heating. Mid-infrared curves respond more to inner dust disk place and heating.

Catalog record

CREATORGautam Das, Lynne A. Hillenbrand, Adolfo S. Carvalho
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE87224
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.19710

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Parameterized YSO Accretion Disk Model with Increasing Accretion Rate: Predicted Outburst Lightcurves Journal: ApJ Gautam Das, Lynne A. Hillenbrand, Adolfo S. Carvalho Abstract A sub-class among Young Stellar Objects (YSOs), known as FU Ori type stars, undergo sudden rises in luminosity by several orders of magnitude on timescales of a few months to a few years, and decay back to quiescence on timescales of a few decades. Modelling the light curves of these objects is crucial to understanding how different components of these accretion disk systems evolve during outburst. For this purpose, we use a parametric model that couples the stellar photospheric emission, magnetospheric accretion shocks, an irradiated dust disk, and a viscously heated gas disk. We adopt time-dependent accretion rate profiles that mimic the observed morphologies of FU Ori outburst light curves, and we use the accretion model infrastructure to simulate multi-band light curves, as well as color curves. The model enables us to study how different components dominate the flux in each band over the course of an outburst, providing insight into star-magnetosphere-disk interactions throughout the outburst cycle. We find that throughout an accretion outburst, red optical and near-infrared lightcurves generally follow the same or very similar form as the input accretion profile, being sensitive to heating in the accretion shocks and inner gas disk, while mid-infrared lightcurves are more responsive to the location and heating of the innermost dust disk. I Introduction Accretion of material, first from protostellar infall, and then from the circumstellar environment, is the way in which stars accumulate their mass. Low-mass ( 4 , <2\ M_{\astrosun} ; ) Young Stellar Objects (YSOs) are embedded in a disk that brings material towards the stellar surface and deposits it onto the star, thus converting the gravitational potential energy to stellar radiation and kinetic energy through winds and jets. The accretion process is believed to be magnetically controlled. The stellar magnetic field stops the radial flow of matter at roughly the radius where the magnetic pressure equals the gas ram pressure, and inflowing materials follow the stellar magnetic fields towards either pole, accreting onto the stellar surface through funnel flows ( 42 ; 23 ) . The magnetospheric accretion activity creates accretion shocks, often buried under the stellar surface, that heat the adjacent photosphere and the base of the accretion columns with X-rays. As the radiation propagates outwards, photons are reprocessed and produce hydrogen recombination lines and hydrogen continuum. The continuum is typically approximated by a “slab” model ( 15 ; 28 ) . For rapidly rotating accretion disks, viscous processes heat the disk to temperatures much higher than the stellar photospheric temperature. Thus, if the accretion rate is high enough, the viscous disk overwhelms in optical and infrared wavelengths. Episodic and bursty accretion is now recognized as an important phenomenon in the evolution of young stellar objects, with accretion outbursts occurring in protostars as well as young stars that are much further along in the dissipation of their circumstellar disks ( 14 ) . In this paper, we study the transition from low-state magnetospheric accretion to high-state outburst accretion, applying a simple parametric model for the star, the disk, and the magnetospheric accretion shocks, while varying the accretion rate over time. We discuss the theory and formulations infrastructure of the modelling pipeline in Section II . In Section III we present a test case of an outburst that follows a linearly increasing accretion rate, and illustrate the predictions in order to orient the reader to the format our results including diagnostic plots. Section IV presents the results for four different types of FU Ori accretion profiles, based on characteristic familes of outburst lighturves. Finally we conclude in Section V . II Modeling Infrastructure Our lightcurve modelling infrastructure is built on top of the YSOpy code ( 13 ; 12 , in-preparation) for predicting optical and near-infrared spectra of accreting young stars. The present model differs from the original YSOpy infrastructure in many ways. Some upgrades improve the self-consistency of the calculations, and some simplifications improve computational efficiency. We also developed tools to simulate time series photometry resulting from a time-dependent model. These modifications are described in Appendix A . The basic elements and parameters of our model, and a flowchart showing the steps and the order of the calculations is provided in Figure 1 , described in detail below. The pipeline separately calculates spectra corresponding to each of the system components: star, accretion shock on the stellar surface, and disk. Thereafter the components of the spectrum are rescaled based on the viewing inclination and the distance to the stellar system. The process of modelling an evolving accretion rate is carried out serially by changing the disk accretion rate, step-by-step, through an outburst cycle, as the defined by the assumed accretion rate profile. At the end of the cycle, we are left with a high-resolution spectrum varying as a function of time. We then convolve this temporal flux profile with telescopic filter transmission functions in order to generate the multi-band lightcurve profiles. We emphasize that we are using a parameterized model, rather than a radiative transfer calculation, or the self-consistent physics of a numerical simulation ( 32 ; 34 ; 36 ; 37 , e.g.) . Figure 1: Flowchart showing the modelling pipeline implementation. See text and Table 1 for definitions of all variables. Key parameters (orange boxes) are either entered as config parameters (upper left aqua box), or in the case of R_{\textrm{trunc}} and R_{\textrm{sub}} , result from application of standard formulae for YSO accretion disks (§ II.2 ). The pipeline separately calculates the spectra corresponding to each system component (magnetospheric accretion hotspot, gas disk, dust disk). The component-wise spectra are then scaled based on the viewing angle (inclination) and distance to the system. This process is carried out serially over the whole outburst cycle by changing the disk accretion rate. At the end of the simulation, we are left with the spectral variation as a function of time. We then convolve this temporal flux profile with telescopic filter transmission functions to generate the multi-band lightcurve profiles. II.1 Parameters Model inputs to YSOpy are shown as config in Figure 1 . They include stellar parameters like the mass of the star ( M_{*} ), radius of the star ( R_{*} ), dipolar magnetic field strength ( B ), and stellar rotation period ( P_{\textrm{rotation}} ). Additional parameters to model the accretion shock component include the hotspot area filling factor ( f ), and gas optical depth ( \tau ). The circumstellar disk has a temperature gradient with radius as described in Section II.2 and an assumed surface gravity (log g ). Disk parameters include an assumed accretion rate ( \dot{M} ), inclination to our line-of-sight ( i ), and an inner disk radius ( R_{in} ). The accretion rate varies in time but is constant with radius. The inner gas disk radius ( R_{in} ) is set by the balance of accretion pressure inward and magnetic pressure outward, and evolves over time as the accretion rate changes. The inner dust disk radius ( R_{\textrm{dust,inner}} ) is the same as the inner gas radius R_{\textrm{{in}}} , except when R_{in} is close enough to the star

Read the complete text