Tunable cylindrical vector beam generation via low-cost printed binary holograms

Emilio E. Ramos-Torres, Beatriz Morales Cruzado, Benjamin Perez-Garcia, Carmelo Rosales-Guzmán · 2026

Read Tunable cylindrical vector beam generation via low-cost printed binary holograms by Emilio E. Ramos-Torres, Beatriz Morales Cruzado, Benjamin Perez-Garcia, Carmelo Rosales-Guzmán (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-19090.txt.

Introduction

Emilio E. Ramos-Torres and three colleagues describe a cheap way to produce cylindrical vector beams, structured-polarisation light beams, from acetate-sheet binary holograms. Swapping the hologram changes the beam, and a Michelson interferometer with a cylindrical-lens converter shapes it, while wave plates tune it from scalar to vector light. Polarisation maps reconstructed from Stokes measurements match simulations, and a vector quality factor confirms the degree of nonseparability. The authors pitch the setup as an alternative to programmable modulators for compact optics and teaching labs.

Catalog record

CREATOREmilio E. Ramos-Torres, Beatriz Morales Cruzado, Benjamin Perez-Garcia, Carmelo Rosales-Guzmán
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE29822
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.19090

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tunable cylindrical vector beam generation via low-cost printed binary holograms Emilio E. Ramos-Torres, Beatriz Morales Cruzado, Benjamin Perez-Garcia, Carmelo Rosales-Guzmán Abstract We report a low-cost method for generating cylindrical vector beams using binary holograms printed on acetate sheets and a modified Michelson interferometer incorporating a cylindrical-lens mode converter. By simply exchanging the hologram the device produces a variety of CVBs with tunable spatial–polarisation nonseparability. The transverse polarisation distributions reconstructed via Stokes polarimetry show spatial–polarisation features consistent with numerical simulations. The degree of nonseparability is further quantified using the vector quality factor (concurrence), demonstrating values in good agreement with theoretical expectations across the generated states. The use of wave-plate retarders enables continuous tuning from scalar to fully vector beams. The simplicity, robustness, and low cost of the proposed system make it an attractive alternative to programmable modulators for compact optical platforms and teaching laboratories. Keywords : Complex vector beams, \ioptwocol 1 Introduction Structured light has become a central theme in modern optics, enabling advances in both fundamental science and applied technologies [ 28 , 32 , 27 , 5 ] . Within this rapidly expanding field, vector beams-optical fields exhibiting nonseparability between spatial and polarisation degrees of freedom-occupy a particularly important role. For example, their close mathematical analogy to quantum entanglement has motivated the development of concepts such as “classical entanglement” [ 32 , 4 ] , while the topologically rich structures encoded in their Stokes fields have inspired the emerging area of optical skyrmions [ 2 , 34 , 33 ] . At the same time, vector beams continue to demonstrate strong practical value in applications including optical trapping, high-capacity communications, optical metrology, and sensing [ 35 , 27 , 1 , 18 ] . Their versatility across both fundamental and applied domains underscores the importance of developing accessible, high-quality methods for their generation. Creating vector beams typically requires simultaneous control over spatial and polarisation degrees of freedom. This can be achieved through geometric-phase devices-such as q-plates [ 15 ] and metasurfaces [ 3 ] -which imprint spin-dependent phase shifts to generate specific vector states. Alternatively, dynamic-phase approaches employ interferometric arrangements or sequential spatial modulation to independently process orthogonal polarisation components [ 24 , 16 ] . In recent years, programmable Spatial Light Modulators (SLMs) [ 29 , 21 , 20 , 25 , 26 ] and Digital Micromirror Devices (DMDs) [ 30 , 8 , 10 , 23 , 13 ] have become the dominant tools for this purpose, enabling the realisation of arbitrary vector fields through computer-generated holography. Despite their flexibility, these devices remain expensive, fragile, and often unsuited for compact or field-deployable systems. Their cost also makes them impractical for instructional laboratories, where accessible demonstrations of structured-light concepts are increasingly in demand. These challenges highlight the need for robust, low-cost methods capable of producing high-quality vector beams without the complexity of programmable modulators. Recent progress in refractive structured-light elements and printed holography has demonstrated promising alternatives [ 37 , 14 ] . In this context, simple printed holographic elements offer a compelling route toward scalable, deployable, and cost-effective implementations. In this manuscript, we demonstrate the generation of cylindrical vector beams (CVBs) using low-cost binary holograms printed on acetate sheets and a modified Michelson interferometer. We show that this approach enables the creation of a broad variety of CVBs with tunable vectorness, ranging continuously from scalar to fully vector beams [ 22 ] . The transverse polarisation distributions reconstructed via Stokes polarimetry reveal high-quality spatial–polarisation structures that exhibit good agreement with numerical simulations. We further characterise the degree of nonseparability using the vector quality factor (concurrence C ), a quantum-inspired metric widely used to quantify vector beam purity [ 31 , 17 ] . It is worth emphasising that while printed holography and refractive structured-light elements have emerged as low-cost alternatives to programmable modulators, existing demonstrations have been largely limited to the generation of static scalar fields. To the best of our knowledge, no previously reported printed-hologram method provides a mechanism to generate the paired \pm\ell modes with controlled relative phase and orthogonal polarisation required for high-purity cylindrical vector beams. Furthermore, current low-cost solutions lack any means of continuously tuning spatial–polarisation nonseparability. These limitations highlight the need for an accessible approach capable of producing tunable CVBs, thereby motivating the method introduced in this work. Our results demonstrate that printed binary holograms constitute a practical and reliable alternative to programmable spatial modulators for generating vector beams. Their low cost, simplicity, and ease of integration make them well suited for compact photonic systems and for deployment in undergraduate teaching laboratories, where access to advanced structured-light tools is often limited. This work therefore provides a pathway for democratising vector-beam technologies and extending their reach beyond traditional research settings. 2 Mathematical background 2.1 Light beam shaping printed holograms We construct complex optical fields from the solutions of the paraxial wave equation. In cylindrical coordinates, these solutions correspond to the well-known Laguerre-Gaussian (LG) modes, which at the plane z=0 can be expressed as \begin{split}LG_{p}^{\ell}(\rho,\varphi)&=B\left(\frac{\sqrt{2}\rho}{w_{0}}\right)^{|\ell|}\exp{\left(-\frac{\rho^{2}}{w_{0}^{2}}\right)}\\ &\times L_{p}^{|\ell|}\left(\frac{2\rho^{2}}{w_{0}^{2}}\right)\exp{(i\ell\varphi)},\end{split} (1) where (\rho,\varphi) are the polar coordinates, \ell\in\mathbb{Z} is the topological charge, p\in\mathbb{Z}{\geq 0} is the radial index, w_{0} is the beam waist, L_{p}^{|\ell|}(\cdot) are the associated Laguerre polynomials of order (|\ell|,p) , and B is a normalisation constant. This complex optical field was encoded in a binary amplitude hologram using the transfer function [ 11 , 12 , 19 ] T(\rho,\varphi)=\frac{1}{2}+\frac{1}{2}\text{sgn}\{\cos[p(\rho,\varphi)]+\cos[q(\rho,\varphi)]\}, (2) where \text{sgn}\{\cdot\} represents the sign function. The terms p(\rho,\varphi) and q(\rho,\varphi) are encoding functions of the amplitude and phase, respectively, defined as \displaystyle p(\rho,\varphi) \displaystyle=\arcsin\left[\frac{|U_{\ell,p}(\rho,\varphi,)|}{\max\{|U_{\ell,p}(\rho,\varphi,)|\}}\right], (3) \displaystyle q(\rho,\varphi) \displaystyle=\phi(\rho,\varphi)+2\pi(\nu\rho+\eta\varphi). Here, |U_{\ell,p}| and \phi(\rho,\varphi) denote the amplitude and phase of the target field, while the term 2\pi(\nu\rho,\eta\varphi) adds a linear phase grating that redirects the encoded LG_{p}^{\ell} field into the first diffraction order. This spatial-frequency offset separates the desired reconstructed mode from the undiffracted zero and higher diffraction-orders generated by the binarisation process, allowing straightforward spatial filtering with an aperture. This encoding strategy may be understood as generating a virtual interference pattern between the target complex field and a reference plane wave carrying a known grating frequency. The sum of cosine terms in Eq. 2 produces a fringe pattern whose local duty cycle represents the amplitude of the target LG_{p}^{\ell} mode, while the spatial position of the fringes map the phase. The subsequent binarisation by the sign function turns this continuous fringe pattern into a square-wave approximation. Binary encoding introduces well-known limitations: the diffraction efficiency of amplitude-only holograms is intrinsically lower (typically 8-12 \% for the first order), and higher diffraction orders carry residual energy. However, for our application -where low cost, robustness, and simplicity are prioritised- these limitations are acceptable. The first diffraction order, isolated with an aperture, provides a clean reconstruction of the target LG field and is sufficient for generating cylindrical vector beams of good quality in the subsequent interferometric stage. The binary holograms were fabricated using a high-resolution printer (imagesetter Agfa AVANTRA 44) operating at 2400 Dots Per Inch (DPIs), corresponding to a pixel size of approximately 10 \mu m, and printed as positive binary amplitude masks, meaning that regions where T(\rho,\varphi)=1 correspond to transparent pixels on the acetate sheet, while regions where T(\rho,\varphi)=0 appear opaque. This ensures a direct and

Read the complete text