Astrometric exoplanet detection survives solar-like stellar contamination 2026 Astrometric exoplanet detection survives solar-like stellar contamination – References

Conaire Deagan, Benjamin T. Montet, P. Tuthill, M. Ferraro, R. Lyu, E. Sheehan · 2026

Read Astrometric exoplanet detection survives solar-like stellar contamination 2026 Astrometric exoplanet detection survives solar-like stellar contamination – References by Conaire Deagan, Benjamin T. Montet, P. Tuthill, M. Ferraro, R. Lyu, E. Sheehan (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-18953.txt.

Introduction

Conaire Deagan and five colleagues measure how much the Sun's activity wobbles its apparent position, a noise floor for planet hunting by astrometry. Using solar images across nearly a decade and three narrow wavelength bands, they quantify centroid jitter through high and low activity phases. Typical jitter at about 607 nanometers sits well below the roughly three microarcsecond signal an Earth-like planet would imprint on a Sun-like star. Stellar activity thus leaves the detection limit between Mars and one Earth, leaving instrument precision as the binding constraint.

Catalog record

CREATORConaire Deagan, Benjamin T. Montet, P. Tuthill, M. Ferraro, R. Lyu, E. Sheehan
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE85283
LICENSEhttp://creativecommons.org/licenses/by-sa/4.0/
RIGHTSCC BY SA
SOURCEarXiv

Source: https://arxiv.org/abs/2605.18953

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Astrometric exoplanet detection survives solar-like stellar contamination 2026 Astrometric exoplanet detection survives solar-like stellar contamination – References Conaire Deagan, Benjamin T. Montet, P. Tuthill, M. Ferraro, R. Lyu, E. Sheehan Abstract Astrometric monitoring of stars provides a promising method for discovery of low-mass planets around nearby Sun-like stars. The astronomical community has proposed several telescopes designed to perform high-precision astrometric observations. One limiting factor intrinsic to stars is the astrometric noise - or "jitter" - induced by surface stellar activity such as starspots and faculae. Despite previous estimates, the relative size of this signal has not been empirically measured from direct photometric observations. We analyse high-resolution images of the Sun to quantify the photometric centroid jitter across three narrow wavelength regions over nearly a decade, spanning high and low activity periods of the Solar cycle. We compare our findings to previous theoretical estimates. We scale this jitter to simulate how a Solar-twin would appear at various distances, establishing an astrometric noise floor below which detection is significantly complicated by stellar activity. We also introduce starspot simulations that augment our data. We find the typical astrometric jitter of the Sun at λ = 607.2 ± 0.25 ​ nm \lambda=607.2\pm 0.25\text{nm} to be 0.342 ​ μ ​ as pc 0.342\mu\text{as pc} , ranging between 0.058 ​ μ ​ as pc 0.058\mu\text{as pc} and 1.294 ​ μ ​ as pc 1.294\mu\text{as pc} for low and high activity periods, respectively. This is lower than the expected ≈ 3 ​ μ ​ as \approx 3\mu\text{as} astrometric signal that an Earth-like planet would produce around a Sun-like star, at 1 pc. Therefore, the astrometric noise floor imposed by intrinsic stellar activity sets a detection limit below one Earth but greater than Mars around Solar-analog stars, making instrument precision the limiting factor for Earth-like exoplanet searches. 1 Introduction Precise astrometric measurements of stellar positions in the sky allows the detection of the gravitational reflex motion induced by an orbiting exoplanet, as the star orbits the common barycentre ( Perryman et al. 2014 ) ). As of August 2025, only 5 of the 5983 confirmed exoplanets have been detected via astrometry and all five are several times the mass of Jupiter ( Sahlmann et al. 2013 , Curiel et al. 2022 , Sozzetti et al. 2023 , Stefánsson et al. 2025 ). Although the Gaia mission is expected to find tens of thousands of exoplanets via astrometric monitoring of their host stars, most of these planets will be more massive than Jupiter ( Perryman et al. 2014 ). While current astrometric telescopes like Gaia lack the (sub-)microarcsecond precision required to detect rocky planets, many telescopes that aim to meet this requirement have been proposed, such as Theia ( The Theia Collaboration et al. 2017 ), small-Jasmine ( Utsunomiya et al. 2014 ), MASS ( Nemati et al. 2020 ), SIM PlanetQuest ( Catanzarite et al. 2006 ), NEAT ( Malbet et al. 2014 ), CHES ( Ji et al. 2022 ), AMARDA ( Gardner et al. 2022 ) , and TOLIMAN ( Tuthill et al. 2018 ). Of these, only a few have been funded and none are currently operational. Additionally, two different high-precision astrometric technologies are currently under development ( Bendek et al. 2021 ). Despite the lack of current detections, there are excellent reasons to explore the use of high-precision astrometry to detect exoplanets. Namely, the lower intrinsic noise of astrometric measurements for nearby stars (quantified in this work) enables superior signal-to-noise ratios in parameter space regions where other traditional methods, such as Doppler RV, become noise-dominated (as discussed below). Microlensing presents an exception, as it is also sensitive to low-mass planets on wide orbits. However, it has the fundamental limitation of relying on chance, one time events - meaning that follow up observations are generally not possible. ( Gaudi 2012 ). Unlike most other exoplanet detection methods, the strength of the astrometric signal increases with orbital separation, as demonstrated in Equation ( 1 ) ( Perryman 2018 ). A=\left(\frac{M_{p}}{M_{*}}\right)\left(\frac{a}{1\text{AU}}\right)\left(\frac{1\text{pc}}{d}\right)\text{arcsec} (1) where A is the astrometric signal in arcseconds, Mp and M_{*} are the masses of the planet and star respectively, a is the semi-major axis of the planets orbit, and d is the distance to the star from Earth. In contrast, the gravitational reflex motion of a star induced by a planet on a circular orbit will generate a radial velocity (RV) signal with a semi-amplitude as described in Equation ( 2 ) ( Perryman 2018 ). K=\frac{1}{\sqrt{a}}\frac{\sqrt{G}}{(M_{*}+M_{p})^{2/3}}\frac{M_{p}\text{sin}i}{\sqrt{1-e^{2}}} (2) where K is the RV signal, G is the gravitational constant, e is the eccentricity of the planets orbit and i is the inclination of the planets orbital plane relative to us. This difference is shown in Fig. 1 , which demonstrates the astrometry and RV signals as a function of orbital separation and planet mass. For an Earth analogue at \approx 1\text{pc} , the RV signal is \sim 10\mathrm{cms^{-1}} , while the astrometric signal is on order of a few micro-arcseconds, depending on the distance of the system from Earth. Very few RV instruments can achieve the precision required to detect an Earth twin. Figure 1: A comparison between exoplanet detection using RV and astrometry for a planet on a circular, edge-on orbit around a 1 M_{\odot} star. The position of the Solar System planets have also been marked. This work calculates the astrometric signal at a distance chosen to align with Alpha Centauri The grey dots indicate confirmed exoplanet parameters only; their positions do not reflect detection signal strength. Both RV and astrometric signals increase with planet mass, but unlike the RV signal, the astrometric signal increases with orbital separation. VLT/ESPRESSO, a state of the art instrument with an instrument precision of 10\mathrm{cms^{-1}} , can only just begin to detect the signal of an Earth twin in the absence of stellar noise, although on-sky performance has only shown a precision of better than 25\,\mathrm{cms^{-1}} ( Pepe et al. 2021 ) . While RV methods have achieved impressive precision and are now primarily limited by stellar noise modeling, astrometry currently operates in a different regime where instrumental improvements can still yield significant gains before stellar noise becomes the dominant limitation. The variations induced by stellar activity impose fundamental physical limits in signal recovery for both techniques. This signal comes from three main sources: stellar oscillations (mainly p-mode waves), granulation, and magnetic activity, such as starspots ( Howard et al. 2012 ) . Stellar oscillations can generate noise on the order of 1\mathrm{ms^{-1}} for solar-like stars, and granulation can generate noise levels of up to several 10’s of \mathrm{cms^{-1}} when disk integrated ( Yu et al. 2018 ; Cegla et al. 2019 ) . Both phenomena occur on relatively short timescales - ranging between a few minutes to a few tens of minutes ( Borgniet et al. 2015 ). On longer timescales, supergranulation can generate RV noise on the order of several 10’s of \mathrm{cms^{-1}} , which can be limit exoplanet detection rates significantly ( Meunier & Lagrange 2019 ) . Stellar magnetic activity, such as starspots and faculae, can also generate significant RV shifts, on a rotational or activity cycle timescale ( Borgniet et al. 2015 ) . The exact level that magnetic features affect

Read the complete text