Switching Rydberg interactions by three orders of magnitude using a terahertz field

Karen Wadenpfuhl, Aaron Reinhard, Oliver Hughes, Lucy Downes, Kevin Weatherill, C. Stuart Adams · 2026

Read Switching Rydberg interactions by three orders of magnitude using a terahertz field by Karen Wadenpfuhl, Aaron Reinhard, Oliver Hughes, Lucy Downes, Kevin Weatherill, C. Stuart Adams (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-18664.txt.

Introduction

Karen Wadenpfuhl and five co-authors switch, with a pulsed terahertz field, the strength of interactions between Rydberg atoms by three orders of magnitude. Microwave fields can only reach states of similar principal quantum number, limiting how far interactions can be tuned. The team shows the switch through photon storage, where the terahertz field drives interaction-induced dephasing of the stored photon. Such fast switching aids single-qubit readout, state detection, quantum annealing, and Rydberg quantum optics. The work dates from 2026.

Catalog record

CREATORKaren Wadenpfuhl, Aaron Reinhard, Oliver Hughes, Lucy Downes, Kevin Weatherill, C. Stuart Adams
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26185
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.18664

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Switching Rydberg interactions by three orders of magnitude using a terahertz field Karen Wadenpfuhl, Aaron Reinhard, Oliver Hughes, Lucy Downes, Kevin Weatherill, C. Stuart Adams Abstract Atom-based quantum computing exploits the ability to enhance atom-atom interactions by employing laser excitation to higher-excited Rydberg states. Additional fields that drive transitions between Rydberg states can offer independent control of these atom-atom interactions. However, as microwave (mw) fields only provide access to states with similar principal quantum number n n , their ability to switch the interactions’ strength is limited. Here, we use a pulsed terahertz field to rapidly switch the strength of interactions between Rydberg atoms by three orders of magnitude. We demonstrate interaction switching using photon storage, where the terahertz field induces an interaction induced dephasing of the stored photon. This ability to switch interactions offers advantages for single-qubit readout, state-detection schemes, quantum annealing, and Rydberg quantum optics. The precise control of highly-excited Rydberg atoms has led to fruitful developments in quantum simulation and computing 35 ; 36 ; 5 ; 24 ; 1 , sensing and metrology 38 ; 13 ; 27 ; 9 ; 17 , and quantum optics 32 ; 30 ; 10 ; 26 ; 7 ; 14 ; 20 . Quantum computing and quantum optics are primarily interested in interactions between Rydberg atoms, whereas quantum sensing relies more heavily on transitions between Rydberg states. To date, most work on interactions has made use of direct dipole-exchange interactions 33 ; 12 or has focused on second-order interactions between atoms in the same Rydberg state 44 ; 4 ; 46 ; 47 . While most work involving transitions in the Rydberg manifold has been restricted to the radiofrequency (rf) or microwave (mw) range ( 0.1-60 GHz) where widely-tunable, high-power sources are readily available, many transitions fall into the higher-energy terahertz (THz) range ( 0.1-10 THz). Terahertz fields allow coupling between Rydberg states with larger change in principal quantum number \Delta n=|n_{2}-n_{1}| , which can have dramatically different interaction strengths. The ability to rapidly switch interaction strengths within the Rydberg manifold has advantages for quantum annealing protocols 16 ; 2 , and would be particularly useful in the case of Rydberg quantum optics, where it decouples light propagation from interactions 28 . However, terahertz frequency fields are not commonly used in Rydberg atomic physics due to the technical difficulties inherent in their creation and detection. Energies of THz photons are above the microwave regime where electronic detectors fail, but are too low for semiconductors that are commonly used for the optical and infrared ranges 21 . Widely-tunable, high-power, on-demand THz source systems comparable to current microwave technology are still in development. Using and probing THz transitions with Rydberg atoms therefore opens new possibilities for sensing and imaging 9 ; 8 ; 19 . In this work, we demonstrate the use of a terahertz field to switch the strength of Rydberg interactions by three orders of magnitude. A terahertz field with a frequency of 0.6 THz and nanosecond pulse duration coherently drives transitions between Rydberg states. To demonstrate interaction switching, we select states with relatively low principal quantum numbers ( n\sim 35) that have interaction strengths differing by three orders of magnitude. The experiments are performed on photons stored as collective excitations, so-called Rydberg polaritons, in an ultra-cold atom ensemble 6 ; 7 . We observe strong interaction-induced dephasing of the polaritons when the terahertz field is applied. Figure 1: Typical \mathbf{\ket{n_{1}S_{1/2}}\leftrightarrow\ket{n_{2}P_{3/2}}} transitions within rubidium Rydberg manifold and \mathbf{C_{6}(n_{1},n_{2})} interaction map of \mathbf{P_{3/2}} pair states. Transitions \ket{n_{1}S_{1/2}}\to\ket{n_{2}P_{3/2}} within the Rydberg manifold that fall into different frequency bands are shown in a . A source operating in the THz band from 0.5 THz to 1.2 THz gives access to transitions with a large difference in principal quantum number \Delta n=n_{2}-n_{1} even at low n . The shading is proportional to the radial dipole matrix element of the transition. Solid lines indicate the states used in this work ( 35S_{1/2} , 32P_{3/2} , 38P_{3/2} ). b shows the interaction strength C_{6}(n_{1}P_{3/2},n_{2}P_{3/2};\ \theta=0) for rubidium. Förster resonances are visible as bright lines in the plot. The central highlighted area of states \ket{n_{1}P_{3/2},n_{2}P_{3/2}} with n_{1}\approx n_{2} can be reached from a \ket{nS_{1/2},nS_{1/2}} state via two microwave transitions in the range 1-60 GHz. The other two highlighted areas can be reached from \ket{nS_{1/2},nS_{1/2}} with a mw transition in the 1-60 GHz range and a THz transition in the range 0.5-1.2 THz. A comparison of mw and THz transitions in rubidium are shown in Figure 1 a . Transitions between an \ket{nS_{1/2}} and an \ket{nP_{3/2}} state that are accessible via a mw field (1-60 GHz, red shading) have small differences in principal quantum number \Delta n , whereas transitions coupled via a THz field (0.5 - 1.2 THz) allow access to states with much larger \Delta n , as can be seen by the green shaded areas. In Fig. 1 b we illustrate the pair states that can be reached via two microwave transitions (highlighted region along the diagonal with n_{1}\approx n_{2} ) and their interaction strength C_{6} . Since terahertz fields can couple to states with larger \Delta n one can address pair states with dramatically different interaction strengths, as indicated particularly by the bright lines in the two outer highlighted areas of Figure 1 b . The THz field therefore allows driving between pair states whose interaction strengths span orders of magnitude, such as we demonstrate in this work. This promises to be useful for Rydberg state-detection schemes and qubit readout sequences 48 ; 42 , or quantum annealing protocols 16 ; 2 . Figure 2: Simplified schematic of the experiment setup including THz optics (view from above). A 3D MOT (horizontal beam shown in dark red, vertical beam pair not shown) cools and traps 87 Rb atoms in the center of the vacuum chamber before they are loaded into an optical dipole trap (orange). Counterpropagating probe (red) and coupling lasers (blue) excite the atoms to a Rydberg state. Photons on the probe transition are detected with a SPAD pair, the dipole trap light is blocked from the SPADs with interference filters. A THz source output (gold) is collimated by a teflon lens, polarisation-cleaned with a wire-grid polariser, and focused onto the atoms with a parabolic mirror. The parabolic mirror has a hole in the center with 3.0 mm clear aperture to which the horizontal MOT beam is size-matched. The experimental setup is illustrated in Fig. 2 . 87 Rb atoms from a 2D MOT located above the science chamber are loaded into a 3D MOT (dark red) formed in the center between the in-vacuo lens pair. A subsequent molasses stage cools the atoms to T=14(2) \upmu K before they are loaded into a dipole trap (orange) with typical axial trap frequency \omega_{ax}\approx 2\pi\times 1.5 kHz and trap ellipticity l_{ax}/l_{rad}\approx 23 . Counterpropagating probe (red) and coupling (blue) lasers address the \ket{5S_{1/2},F=2}\to\ket{5P_{3/2},F^{\prime}=3} transition at 780.2 nm and \ket{5P_{3/2},F^{\prime}=3}\to\ket{35S_{1/2}} at 480.2 nm, respectively. Photons on the probe transition are detected with a single-photon avalanche detector (SPAD) pair and cumulative counts from multiple repetitons of the experiment are taken as datapoints. Probe photons are first stored in the ensemble and then retrieved by switching the coupling

Read the complete text