Comparative study of second harmonic generation at 1030 nm in BiBO and LBO crystals using a 100 W-class picosecond laser
Huzefa Aliasger, Šimon Šatra \corresp Huzefa Aliasger, HiLASE Centre, FZU - Institute of Physics of the Czech Academy of Sciences, Za Radnicí 828, 25241 Dolní Břežany, Czechia, Ondřej Novák, Jiří Mužík, Michal Jelínek, Martin Smrž, Tomáš Mocek · 2026
Read Comparative study of second harmonic generation at 1030 nm in BiBO and LBO crystals using a 100 W-class picosecond laser by Huzefa Aliasger, Šimon Šatra \corresp Huzefa Aliasger, HiLASE Centre, FZU - Institute of Physics of the Czech Academy of Sciences, Za Radnicí 828, 25241 Dolní Břežany, Czechia, Ondřej Novák, Jiří Mužík, Michal Jelínek, Martin Smrž, Tomáš Mocek (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-18527.txt.
Introduction
Huzefa Aliasger and six co-authors compare, in a 2026 paper, single-pass second-harmonic generation in BiBO and LBO crystals under a 1030 nm picosecond laser. Both crystals yield 32 watts of green output at 515 nm, a 56 percent efficiency, the highest reported green output from BiBO. Power response, stability, beam quality, pulse length, spectra, heat effects, and angular range are tested for both. The results benchmark crystal choice for high-power ultrashort-pulse frequency conversion.
Catalog record
| CREATOR | Huzefa Aliasger, Šimon Šatra \corresp Huzefa Aliasger, HiLASE Centre, FZU - Institute of Physics of the Czech Academy of Sciences, Za Radnicí 828, 25241 Dolní Břežany, Czechia, Ondřej Novák, Jiří Mužík, Michal Jelínek, Martin Smrž, Tomáš Mocek |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 37684 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.18527
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Comparative study of second harmonic generation at 1030 nm in BiBO and LBO crystals using a 100 W-class picosecond laser Huzefa Aliasger, Šimon Šatra \corresp Huzefa Aliasger, HiLASE Centre, FZU - Institute of Physics of the Czech Academy of Sciences, Za Radnicí 828, 25241 Dolní Břežany, Czechia, Ondřej Novák, Jiří Mužík, Michal Jelínek, Martin Smrž, Tomáš Mocek Abstract We present a systematic experimental comparison of single-pass second-harmonic generation (SHG) in bismuth triborate (BiBO) and lithium triborate (LBO) nonlinear crystals, driven by a 1.3 ps, 91 kHz laser at 1030 nm with up to 57 W of average input power. Both crystals yielded 32 W of second harmonic (SH) output at 515 nm, corresponding to a conversion efficiency of 56%, which to the best of our knowledge represents the highest SH output power reported in the green spectral region using a BiBO crystal. Power dependence, long-term stability, beam quality, pulse duration, spectral properties, thermal effects, and angular acceptance bandwidth are characterized and directly compared for both crystals. These results provide quantitative performance benchmarks to guide the selection of nonlinear crystals for high-average-power, ultrashort-pulse frequency conversion near 1030 nm. keywords angular acceptance bandwidth, frequency conversion, high-average-power, lithium triborate, bismuth triborate, long-term stability 1 Introduction Second harmonic generation (SHG) is one of the most efficient ways of extending the spectral coverage of solid-state lasers. In particular, SHG in the green spectral region is of considerable practical importance for a range of applications including laser micromachining 1 , pumping of optical parametric oscillators and amplifiers 2 , 3 , pumping of titanium:sapphire lasers 4 , scientific instrumentation 5 , and medical diagnostics 6 . The rapid progress in high-average-power picosecond and sub-picosecond thin-disk 7 , 8 , fiber 9 , InnoSlab 10 , and zig-zag slab 11 laser systems has significantly increased the demand for nonlinear frequency-conversion stages that can simultaneously provide high conversion efficiency, excellent beam quality, and long-term operational stability, particularly for operation in the near-infrared spectral region around 1030 nm. Lithium triborate (LBO, \mathrm{LiB_{3}O_{5}} ) has long been the workhorse nonlinear crystal for high-power SHG in this wavelength range, owing to its favorable combination of relatively high damage threshold (2.5 GW/cm² at 1064 nm, 10 ns 12 ), low walk-off, moderate effective nonlinearity, and broad transparency. These properties have made LBO a standard choice in large-scale and industrial laser systems. In contrast, bismuth triborate (BiBO, \mathrm{BiB_{3}O_{6}} ) has attracted growing interest as an alternative frequency-doubling crystal, offering a substantially larger effective nonlinear coefficient, which is more than four times that of LBO and in principle enables efficient SHG in significantly shorter crystal lengths. The reduced crystal length can mitigate deleterious effects such as group velocity dispersion (GVD) and temporal walk-off, which become increasingly relevant in the picosecond regime. However, BiBO exhibits a considerably lower damage threshold (0.3 GW/cm² at 1064 nm, 10 ns 13 ), larger spatial walk-off, and typically higher absorption at the second harmonic (SH) wavelength, which may enhance thermal loading and affect long-term phase-matching stability under high-power operation. While numerous studies have independently characterized SHG performance in the LBO crystal for high-average-power lasers of over 50 W 14 , 15 , the BiBO crystal has not been tested for such high-average-power in picosecond regime. Systematic experimental studies that directly compare nonlinear optical crystals under identical high-average-power, picosecond driving conditions remain notably scarce in the literature. Such direct comparisons are indispensable for rigorously quantifying the practical trade-offs governing nonlinear conversion efficiency, angular acceptance bandwidth, thermal phase-matching robustness, beam quality preservation, and output power stability, all of which are parameters of critical importance in the design and optimization of next-generation harmonic generation modules integrated with high-average-power laser platforms. In this work, we present a comprehensive experimental comparison of single-pass SHG in BiBO and LBO crystals driven by a 1.3 ps, 91 kHz, 57 W Yb:YAG thin-disk laser at 1030 nm. We report, to the best of our knowledge, the highest SH output power generated in the green spectral region using a BiBO crystal with a thin-disk Yb:YAG laser, achieving 32 W at 515 nm from both crystals at a conversion efficiency of 56%. We systematically characterize the SH output power dependence, long-term power stability, thermal effects on phase matching, SH beam quality, pulse duration, spectral properties, and angular acceptance bandwidth for both materials. Our results provide quantitative, directly comparable performance benchmarks that guide the selection of nonlinear crystals for high-average-power, ultrashort-pulse frequency conversion near 1030 nm. 2 Experimental setup The experimental setup is illustrated in Figure 1 . The fundamental laser source utilizes a chirped-pulse amplification (CPA) architecture comprising a fiber-based front-end and a Yb:YAG thin-disk regenerative amplifier 16 17 . The system delivers pulses at a central wavelength of 1030 nm with an average output power of 57 W at a repetition rate of 91 kHz and a pulse duration of 1.3 ps. The fundamental laser output beam first passes through an attenuator integrated within the laser housing. This attenuator, comprising a half-wave plate mounted on a motorized rotation stage and two thin-film Brewster polarizers (TFBPs), controls the average power delivered to the downstream optical components on the optical table. On the optical table, the s-polarized (vertical) component reflected from TFBPs is directed towards the nonlinear crystal via mirrors M1 and M2. Mirror M2 is mounted on a motorized translation stage: when positioned in the beam path, it directs the laser beam to the nonlinear crystal; when retracted, the beam is directed either to power meter PM1 (Ophir F150A-BB-26) via mirror M3 or to beam profiling camera C1 (Cinogy CinCam CMOS 1.001 nano) via mirror M7. Both M3 and M7 are mounted on flip mounts for convenient insertion or removal from the beam path. A half-wave plate HWP is positioned between M2 and the nonlinear crystal to ensure that the fundamental beam enters the crystal with p-polarization (horizontal). Figure 1: A schematic of experimental setup. M: mirrors; HWP: half waveplates; P: polarizers; HS: harmonic separators (dichroic mirrors); C: camera; PM: power meters; BD: beam dumps; MTS: motorized translation stage The SH generated in the nonlinear crystal, along with the residual unconverted fundamental, is directed to harmonic separator HS1. At HS1, the SH beam is reflected and directed toward the SH attenuator via harmonic separator HS2, while the transmitted unconverted fundamental is directed to the beam dump BD1. The SH attenuator, consisting of the half-wave plate HWP2, the polarizer P and the beam dump BD2, is used to control the power delivered to the camera and the other diagnostics. The SH beam is then directed either to the power meter PM2 (Ophir 50(150)A-BB-26) via mirrors M4 and M5, or to camera C1 for beam profiling via the M4 and M6 after attenuation. Mirror M5 is also mounted on a flip mount for convenient insertion or removal from the beam path. The BiBO crystal (Psolutions24) used for SHG has dimensions of [8 mm \times 8 mm] \times 1.5 mm ([aperture] \times length) and is cut at phase-matching angles of \theta = 166.6° and \phi = 90° for type I (e + e \rightarrow o) SHG in the YZ plane. The LBO crystal (Cristal Laser) used for SHG has dimensions of [8 mm \times 8 mm] \times 6 mm and is cut