Quantifying water-driven geometric uncertainties in powder bed concrete printing using high-resolution 3D modeling Journal: arXiv (cs.CE)

Christoph Wolf, Petr Hlaváček, Annika Robens-Radermacher, Daniel Kadoke, Jörg F. Unger · 2026

Read Quantifying water-driven geometric uncertainties in powder bed concrete printing using high-resolution 3D modeling Journal: arXiv (cs.CE) by Christoph Wolf, Petr Hlaváček, Annika Robens-Radermacher, Daniel Kadoke, Jörg F. Unger (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-18290.txt.

Introduction

Christoph Wolf's 2026 study quantifies how water dosage warps geometry in powder bed 3D printing of concrete. Small changes in voxel-wise water content cause large systematic deviations, including rounded edges and swelling, with biases that depend on direction. High-resolution stereophotogrammetry aligns as-built scans with CAD models to measure distance errors and volume differences across dosage settings. Deformation patterns repeat and strengthen with more water, yet stiffness and strength barely change. Excess voxel water diffuses into nearby powder, leaving the effective water-cement ratio nearly unchanged.

Catalog record

CREATORChristoph Wolf, Petr Hlaváček, Annika Robens-Radermacher, Daniel Kadoke, Jörg F. Unger
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE76266
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.18290

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Quantifying water-driven geometric uncertainties in powder bed concrete printing using high-resolution 3D modeling Journal: arXiv (cs.CE) Christoph Wolf, Petr Hlaváček, Annika Robens-Radermacher, Daniel Kadoke, Jörg F. Unger Abstract Dimensional accuracy in powder bed 3D printing of concrete is strongly influenced by binder distribution, and the resulting geometric deviations can be direction-dependent. This study examines how voxel-wise water dosage influences geometric fidelity and deviation anisotropy. Experiments show that small changes in water content can cause large, systematic deviations, including edge rounding and swelling. We quantify these effects using high-resolution stereophotogrammetry, aligning as-built scans with CAD models. We then compute deviation metrics such as point-wise distance errors and volumetric differences across multiple water-dosage settings, revealing repeatable, directionally biased deformation patterns that intensify with higher water content. Mechanical testing indicates that stiffness and strength change only marginally, with no clear trend in the tested range. This is explained by excess voxel water diffusing into surrounding powder, leaving the effective water-cement ratio largely unchanged. Finally, we demonstrate a design-compensation concept that pre-adjusts digital geometry to counter predictable deviations, improving accuracy without post-processing. † † graphicalabstract: † † highlights: High-resolution 3D modeling enables surface-by-surface deviation analysis. Proposed set of deviation metrics allows systematic geometry deviation assessment. Directional dependency of deviations and water dosage. Mechanical properties stable since extra water spreads without raising w/c ratio. CAD pre-deformation compensates geometric deviations at the design stage. 1 Introduction Additive manufacturing (AM) technologies have emerged as transformative approaches in the construction industry, offering unprecedented design freedom, reduced material waste, and the potential for automated fabrication of complex geometries [ 8 , 6 ] . Among the various AM techniques adapted for cementitious materials, concrete 3D printing (3DCP) has gained substantial attention over the past decade, driven by the need for more sustainable, efficient, and customizable construction methods [ 20 , 6 ] . The construction sector accounts for approximately 36\text{\,}\mathrm{\%}40\text{\,}\mathrm{\%} of global energy consumption and greenhouse gas emissions, underscoring the urgent need for sustainable construction technologies [ 45 ] . 3DCP technology offers potential solutions through optimized material usage, reduced labor requirements, and the elimination of formwork in many applications [ 8 ] . The technology encompasses several distinct process categories, each with unique advantages and limitations depending on application requirements, scale, and material properties. Extrusion-based concrete printing, the most widely adopted approach, deposits material layer-by-layer through a nozzle in a continuous bead [ 5 , 26 ] . This method has demonstrated success in creating structural elements and even full-scale building components, benefiting from relatively straightforward equipment requirements and compatibility with various concrete formulations [ 17 , 18 , 43 ] . However, extrusion-based processes face inherent constraints related to overhang angles, the need for support structures in some geometries, and limitations in achieving fine geometric details [ 39 , 19 ] . Additionally, the fresh concrete must possess specific rheological properties, sufficient flowability for extrusion while maintaining adequate yield stress and plastic viscosity to support subsequent layers without deformation [ 32 , 27 , 16 ] . Powder bed 3D printing for concrete, also known as binder jetting or selective cement activation, operates on fundamentally different principles that offer distinct geometric and material advantages [ 21 , 23 , 9 ] . In this process, a thin layer of dry cementitious powder is spread across a build platform, followed by selective deposition of a liquid binder (typically water or water-based solutions) in the desired cross-sectional pattern [ 38 ] . This cycle repeats layer-by-layer until the complete component geometry is formed. The process can be further classified into three main techniques: selective binder activation (water deposited on cement and aggregate mixture), selective paste intrusion (cement paste applied to aggregate layers), and binder jetting (binder applied to powder bed with separate activator) [ 21 , 38 ] . The surrounding unbound powder provides inherent support for overhanging features and complex internal geometries, eliminating the need for additional support structures and enabling the fabrication of designs that would be challenging or impossible with extrusion-based methods [ 21 ] . Furthermore, powder bed printing allows for precise control over local material properties through variable binder saturation, offers superior surface resolution, and can achieve more intricate geometries due to the fine layer thicknesses achievable (typically 1\text{\,}\mathrm{mm}5\text{\,}\mathrm{mm} compared to 10\text{\,}\mathrm{mm}50\text{\,}\mathrm{mm} for extrusion) [ 34 , 23 ] . Despite these advantages, powder bed 3D printing for concrete introduces specific challenges related to process control and geometric accuracy [ 33 , 24 ] . While material properties have been extensively studied for extrusion-based 3DCP through comprehensive interlaboratory efforts [ 31 , 25 , 3 ] , comparable systematic investigations for powder bed printing methods remain limited. The interaction between powder characteristics (particle size distribution, flowability, composition), binder properties, and deposition parameters significantly influences the hydration kinetics, material consolidation, and ultimately the dimensional accuracy of printed components [ 4 , 22 ] . Water dosage, in particular, plays a critical role: insufficient fluid penetration results in weak inter-layer bonding and incomplete hydration, while excessive water content leads to powder migration, bleeding, and geometric distortions [ 42 , 33 , 36 ] . These process-induced variations manifest as deviations between the intended as-designed geometry and the as-built physical component, affecting both dimensional precision and surface quality-factors that are crucial for applications requiring tight tolerances or aesthetic surface finishes [ 44 , 7 , 40 ] . Advanced measurement techniques have been developed, with [ 28 ] proposing mathematical morphology-based point cloud analysis for geometry assessment (including the definition of a print accuracy index - PAI), combining global visual comparison with layer-wise quantification using topological methods. Another printibility index is defined in [ 16 ] using 3D scanning methods. We employ a comparable analytical framework, focusing specifically on the relationship between water content and geometric fidelity. For extrusion-based printing, understanding material deformation has been addressed through computational approaches, with [ 29 ] using the Particle Finite Element Method to study the influence of key process and material parameters to the shape of the free surface of the filament. In [ 30 ] a deep learning framework was introduced for predicting filament geometry. Experimental compensation strategies have also been developed, with [ 1 ] establishing relationships between process parameters and deformation, and [ 2 ] developing grammar-based algorithms for generating compensated toolpaths. These developments demonstrate a mature understanding of geometry prediction and shape accuracy control in extrusion-based methods. For powder bed printing methods, particularly selective cement activation (SCA) and binder jetting, research has focused intensively on understanding the complex interactions between material composition, water dosage, and resulting properties. [ 23 ] conducted comprehensive investigations demonstrating that material and process parameters, including w/c ratio, particle size distribution, methylcellulose addition, and water application method, significantly affect both strength and dimensional accuracy. Notably, their work revealed that, contrary to conventional concrete, SCA can exhibit increasing strength with increasing water content within certain ranges. Specifically methylcellulose addition and its influence on shape accuracy has been extensively studied in [ 41 ] . The fundamental physics of fluid penetration in powder beds has been systematically investigated by [ 24 ] , who developed experimental and analytical frameworks for understanding binder intrusion behavior, while also quantifying the shape accuracy with a height deviation

Read the complete text