Fast 5G Signal Acquisition by Using Non-Uniform Sampling

Alejandro Gonzalez-Garrido European Commission, Joint Research Centre (JRC), Ispra, Italy · 2026

Read Fast 5G Signal Acquisition by Using Non-Uniform Sampling by Alejandro Gonzalez-Garrido European Commission, Joint Research Centre (JRC), Ispra, Italy (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-18189.txt.

Introduction

Alejandro Gonzalez Garrido's 2026 paper frames fast 5G signal acquisition as inference over delay and Doppler, not full waveform rebuild. A multi-coset sampling design keeps only the samples needed for detection and estimation, shrinking the correlator bank that runs on them. An offline search picks the coset pattern by balancing peak isolation against even energy cover across the delay range. On 5G NR sync signals under worst-case Doppler, mean acquisition time falls by 2.8 times to 34.2 times versus uniform sampling, at a cost in delay and Doppler error.

Catalog record

CREATORAlejandro Gonzalez-Garrido European Commission, Joint Research Centre (JRC), Ispra, Italy
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE24517
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.18189

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Fast 5G Signal Acquisition by Using Non-Uniform Sampling Alejandro Gonzalez-Garrido European Commission, Joint Research Centre (JRC), Ispra, Italy Abstract This paper proposes a framework for fast signal acquisition based on deterministic non-uniform sampling, with emphasis on multi-coset architectures and receivers driven by known synchronization sequences, pilots, or preambles. Unlike conventional sampling theory, which is formulated from a waveform-reconstruction perspective, the proposed approach is derived from the observation that acquisition is fundamentally a parametric inference problem in delay-Doppler space. Accordingly, the objective is not to reconstruct the full Nyquist-rate signal, but to preserve the statistics required for detection and estimation. The paper formulates compressed-domain acquisition through a generalized likelihood ratio test and shows how multi-coset sampling leads to reduced correlator structures operating directly on the retained samples. An offline exhaustive design procedure is introduced to select the coset pattern for a given sampling ratio by minimizing a cost that jointly enforces peak isolation in the acquisition surface and uniform retained-energy coverage over the delay search interval. The framework is evaluated on 5G NR synchronization using the PSS/SSS signals under a worst-case Doppler scenario. Results show that substantial reductions in mean acquisition time can be achieved relative to uniform sampling, with measured gains ranging from 2.8 × 2.8\times to 34.2 × 34.2\times , depending on the selected compression ratio. The corresponding delay and Doppler root-mean-square errors quantify the estimation penalty introduced by aggressive sample reduction. These results demonstrate a clear complexity-performance trade-off and confirm the potential of multi-coset sampling for fast synchronization-oriented receivers. I Introduction The conventional design of digital receivers is deeply rooted in the Nyquist–Shannon sampling theorem, according to which an arbitrary band-limited waveform can be represented without loss from uniform samples acquired at a rate not smaller than twice its highest frequency component [ 9 , 10 ] . This principle has shaped the design of ADC , analog front-ends, and digital processing chains across communication, navigation, radar, and sensing systems. In its classical form, however, the sampling problem is commonly posed from a reconstruction perspective: the samples are acquired so that the waveform x(t) itself can be faithfully recovered and then processed. In acquisition and synchronization, the receiver objective is more specific. The signal of interest is typically known up to a small set of unknown parameters, such as propagation delay, Doppler or carrier-frequency offset, complex amplitude, and, in spread-spectrum or pilot-aided systems, a code or preamble index. Accordingly, the task is not to reconstruct the entire received waveform, but rather to preserve the sufficient information required to decide whether the signal is present and to identify the location of the corresponding peak in the delay–Doppler–code search space. This inference-oriented viewpoint is explicit in low-rate time-delay estimation methods, compressive acquisition schemes for asynchronous multi-access signals, and compressive GPS acquisition architectures, all of which show that reliable synchronization can be carried out directly from reduced-dimensional measurements without first recovering the full Nyquist-rate signal [ 4 , 7 , 6 ] . A closely related perspective also appears in sub-Nyquist radar, where target delay and Doppler are recovered from compressed measurements by operating directly on the parameters of interest rather than on a reconstructed high-rate waveform [ 2 ] . Multi-coset sampling is a deterministic non-uniform sampling architecture that, instead of retaining arbitrary irregular samples, selects a fixed subset of Nyquist instants within each block of L samples, thereby producing a periodic non-uniform pattern that admits practical hardware implementation through synchronized low-rate branches [ 11 ] . At the same time, its algebraic structure is well suited to parametric inference, since the resulting measurements preserve enough information to support delay, frequency, and support estimation while avoiding the full-rate front-end demanded by exhaustive matched filtering [ 11 , 8 , 4 ] . It can be especially relevant to acquisition and synchronization problems, so that receivers driven by known pilots, synchronization sequences, or spreading codes, make multi-coset sampling a natural candidate for reducing sampling and correlator complexity while maintaining acquisition capability [ 7 , 6 ] . The objective of this paper is to present a theoretical framework for fast signal acquisition based on multi-coset sampling when the waveform contains known pilots. The emphasis is placed on acquisition and parameter estimation rather than on generic signal reconstruction. The main contributions are threefold. First, the acquisition problem is reformulated as compressed-domain detection and estimation using the generalized likelihood ratio test over a known pilot family. Second, multi-coset sampling is linked to reduced correlator structures that operate directly on the retained samples. Third, the selection of the sampling pattern is recast as a receiver optimization problem based on preservation of the delay-Doppler estimation. II Signal Model and Problem Formulation II-A Acquisition as a Parametric Inference Problem Consider a received continuous-time signal containing a known pilot s(t) affected by an unknown delay \tau , Doppler shift \nu , complex amplitude \alpha , and additive noise w(t) : r(t)=\alpha\,s(t-\tau)e^{j2\pi\nu t}+w(t). (1) After uniform Nyquist-rate sampling with period T_{s} , the discrete-time model becomes r[n]=\alpha\,s[n-d]e^{j2\pi\nu nT_{s}}+w[n], (2) with d=\lfloor\tau/T_{s}\rfloor the discrete delay. For a single path in white Gaussian noise, the maximum-likelihood acquisition problem reduces to a normalized matched-filter search over the unknown parameters. By eliminating the nuisance parameter \alpha , the estimator can be written as (\hat{d},\hat{\nu})=\arg\max_{d,\nu}\frac{\left|\langle r,s_{d,\nu}\rangle\right|^{2}}{\|s_{d,\nu}\|_{2}^{2}},\qquad s_{d,\nu}[n]=s[n-d]e^{j2\pi\nu nT_{s}}. (3) Hence, the key object for acquisition is the ambiguity surface \chi(d,\nu)=\langle r,s_{d,\nu}\rangle, not the full waveform itself. This distinction is decisive: once the acquisition problem is recognized as an inference problem over a structured pilot family, sampling architectures may be optimized to preserve ( 3 ) rather than to reconstruct all Nyquist-rate samples. II-B General Linear Measurement Model Let \mathbf{x}\in\mathbb{C}^{N} denote the Nyquist-rate observation over a finite processing block. A general non-uniform sampling front-end is represented by the linear model \mathbf{y}=\mathbf{P}_{\Omega}\mathbf{x}. (4) where \mathbf{P}_{\Omega} is a row-selection matrix associated with the retained index set \Omega\subset\{0,\dots,N-1\} . This formulation is standard in compressive signal processing and provides a clean bridge between classical matched filtering and reduced-dimensional inference [ 3 ] . The challenge is then to determine a structured sample set \Omega , that minimizes the processing burden while preserving the acquisition surface with sufficient fidelity. The present work focuses on multi-coset sampling because it yields a deterministic and implementation-friendly class of measurement operators. III Multi-Coset Sampling and Compressed-Domain Acquisition III-A Multi-Coset Sampling Architecture Let the Nyquist period be T_{s} and the corresponding Nyquist-rate sampling frequency be f_{s}=1/T . In multi-coset sampling, the receiver selects a period L , retains K<L sample positions per period, and defines a coset set \mathcal{C}=\{c_{0},c_{1},\dots,c_{K-1}\}\subset\{0,1,\dots,L-1\}. (5) The retained samples occur at multiple times of the sampling period T_{s} t_{i}[m]=(mL+c_{i})T_{s},\qquad i=0,\dots,K-1,\;m\in\mathbb{Z}. (6) Equivalently, within each block of L Nyquist instants, only K samples are kept. The average sampling rate is therefore f_{\mathrm{avg}}=\frac{K}{LT_{s}}. This interpretation immediately exposes the rate-reduction factor and clarifies why the ratio K/L is the main design variable. Multi-coset sampling can also be viewed as a bank of K uniform low-rate sequences, each associated with one retained coset, which makes the architecture attractive for digital realization and branch-based processing [ 8 ] . III-B Compressed-Domain Detection and Estimation Assume now that the block observation belongs to the parametric family \mathbf{x}=\alpha\,\mathbf{s}(\theta)+\mathbf{w},\qquad\theta=(d,\nu,\ldots), (7) where \mathbf{s}(\theta) is the Nyquist-rate local copy

Read the complete text