A Dexterous and Compliant Gripper With Soft Hydraulic Actuation for Microgravity Manipulation
William Su, Jordan Kam, Yixiao Wang, Jianshu Zhou · 2026
Read A Dexterous and Compliant Gripper With Soft Hydraulic Actuation for Microgravity Manipulation by William Su, Jordan Kam, Yixiao Wang, Jianshu Zhou (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-17851.txt.
Introduction
William Su and three colleagues fit Astrobee, the free-flying station robot, with DexCoHand, a dexterous two-finger gripper with six degrees of freedom. Astrobee's current claw perches well but handles continuous, skillful manipulation poorly. Contact forces feed straight into base motion, so a gripper must hold steady without shoving the base around. In MuJoCo tests of the standard handrail perching sequence, DexCoHand kept commanded pan and tilt moves while cutting stray cross-axis base motion. Earth hardware tests confirm its dexterous handling and promise for more adaptable orbital manipulation.
Catalog record
| CREATOR | William Su, Jordan Kam, Yixiao Wang, Jianshu Zhou |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 12327 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2605.17851
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
A Dexterous and Compliant Gripper With Soft Hydraulic Actuation for Microgravity Manipulation William Su, Jordan Kam, Yixiao Wang, Jianshu Zhou Abstract Astrobee’s existing one-degree-of-freedom (DOF) underactuated compliant claw gripper enables perching on the International Space Station (ISS), but provides limited capability for continuous dexterous manipulation. More complex microgravity tasks require an end-effector that can maintain stable contact while limiting disturbance to the free-flying base, since contact forces directly couple into base motion. This article presents the integration of DexCoHand, a dexterous and compliant two-finger, 6-DOF gripper, with the Astrobee free-flying robot for microgravity manipulation. The system is evaluated in MuJoCo using Astrobee’s standard handrail perching sequence, including approach, perching, and subsequent pan and tilt motions. Compared with Astrobee’s existing gripper, DexCoHand preserves the commanded pan and tilt motions while reducing unintended cross-axis base motion. Hardware experiments on Earth further demonstrate DexCoHand’s dexterous manipulation capabilities and its potential for more adaptable intelligent manipulation tasks. I Introduction Astrobee is a free-flying robot aboard the International Space Station (ISS) that performs autonomous inspection, localization, docking, and perching tasks [ 13 , 11 , 14 , 12 ] . One key manipulation task Astrobee is capable of is perching onto handrails along the ISS Kibo module using its perching arm payload [ 12 ] . Astrobee does so using a 1-DOF underactuated compliant claw gripper designed to perch around the ISS handrail. This design is effective for perching, but it constrains Astrobee to a limited grasp-and-release manipulation regime. More dexterous tasks, such as reorienting a payload for handoff, aligning a tool tip, threading or routing a cable, and manipulating small objects, require pose regulation within the grasp rather than repeated regrasping [ 9 , 15 , 2 ] . In microgravity, this distinction matters. Objects do not settle under gravity, and every contact impulse couples directly into the free-flyer base [ 16 ] , inducing undesired translation or rotation and forcing compensatory control [ 7 ] . In recent years, several grippers have been developed to expand Astrobee’s manipulation capabilities. Gecko-inspired adhesive grippers have been designed to enable anchoring on smooth surfaces [ 1 ] , compliant perching grippers provide stable handrail grasping [ 12 ] , rigid-soft hybrid grippers improve conforming grasp of varied geometries [ 5 ] , and three-finger logistics grippers support cargo transfer and transport [ 5 ] . These grippers advance attachment, grasp robustness, and transport, but they provide limited support for continuous dexterous in-hand manipulation [ 17 ] . Fig. 1: (a) Astrobee with the DexCoHand attached on the perching arm. (b) 3-DOF per finger. (c) Supported finger motions, including fingertip flexion, proximal link flexion, and proximal link adduction/abduction. (d) Universal joint at the proximal link. Fig. 2: Comparison of base motion during tilt and pan maneuvers with the perching gripper and DexCoHand. (a, d) tilt and pan maneuver setup and coordinate frame definition. (b, e) Base position trajectories along x , y , and z during tilt and pan. (c, f) Representative tilt and pan motion sequence. This article presents the integration of DexCoHand, a dexterous and compliant two-finger, six-degree-of-freedom (2F–6-DOF) gripper, with Astrobee’s perching arm for microgravity manipulation [ 21 , 18 ] . Fig. 1 provides an overview of the integration of DexCoHand with Astrobee and the gripper’s components and motion. DexCoHand introduces multiple controlled contact directions through 3-DOF fingers, while soft hydraulic actuation provides compliant force transmission under contact uncertainty [ 20 ] . We use DexCoHand to extend Astrobee’s dexterous manipulation capabilities from discrete grasp-and-release actions to continuous contact-rich manipulation while preserving the perching behavior that the current arm already performs. This increased dexterity would enable Astrobee to do more intelligent tasks in microgravity. II Methodology To evaluate DexCoHand’s manipulation capabilities, we create two models: Astrobee with the DexCoHand and with the perching arm gripper [ 10 ] . We evaluate the DexCoHand gripper in MuJoCo compared to Astrobee’s perching arm gripper using a standard handrail perching sequence consisting of approach, perching, and subsequent pan and tilt motions. We compare base motion between the two end-effectors and use hardware demonstrations to show the dexterous manipulation capabilities enabled by DexCoHand. Together, these results show that the DexCoHand can perform the same manipulation tasks as the state-of-the-art perching arm gripper, but can also expand the manipulation space toward more intelligent dexterity in microgravity. II-A Kinematics & Contact Compliance DexCoHand provides two fingers with three controlled DOF per finger, including fingertip flexion, proximal flexion, and proximal adduction/abduction, as shown in Fig. 1 . The flexion joints provide grasp closure, while the adduction/abduction joint give each finger lateral motion inside the grasp. For a contact point on the fingertip, the local contact velocity is given by: \dot{\mathbf{x}}_{c}=\mathbf{J}_{c}(\mathbf{q})\dot{\mathbf{q}} (1) where \mathbf{q} is the hand joint vector and \mathbf{J}_{c} maps joint motion to contact motion. Increasing the number of independent finger DOF expands the column space of \mathbf{J}_{c} , allowing the contact point to move in additional directions on the object surface without requiring base motion or regrasping. The soft hydraulic transmission introduces compliance between actuator command and contact force. Around a local operating point, this behavior can be represented using an effective compliance model. If \mathbf{C}_{q} denotes joint-space compliance, the contact-frame compliance can be written as: \mathbf{C}_{c}=\mathbf{J}_{c}\mathbf{C}_{q}\mathbf{J}_{c}^{\top} (2) This relationship allows compliance at the joints which maps directly to compliance at the contact interface. A more compliant contact reduces abrupt force changes during stick-slip transitions and distributes interaction forces over time, which helps limit unintended base motion during manipulation. II-B Floating-Base Dynamics Model Astrobee cannot rely on a fixed ground reaction during manipulation. Contact forces at the gripper therefore appear directly as disturbances on the free-flying base. A simplified translational model used in simulation is: m_{b}\dot{\mathbf{v}}_{b}=\mathbf{F}_{\mathrm{thr}}-\sum_{i}\mathbf{f}_{c,i}, (3) where m_{b} is the Astrobee base mass, \mathbf{F}_{\mathrm{thr}} is the commanded propulsion force, and \mathbf{f}_{c,i} are contact forces transmitted through the end-effector. In microgravity, gravity does not dissipate contact events, so the timing and direction of \mathbf{f}_{c,i} directly affect base motion. We therefore log Astrobee base position during pan and tilt maneuvers as a proxy for contact-induced disturbance. Motion along the commanded direction indicates whether the perching maneuver is preserved, while motion in the orthogonal axes reflects coupling from the gripper into the free-flying base. This simplified model captures the net effect of contact forces, while full free-flying dynamics arise from coupled inertia and momentum exchange between the manipulator and spacecraft [ 16 ] . II-C Simulation Setup Astrobee with both gripper payloads is modeled in MuJoCo as a free-floating rigid body with grippers attached to the perching arm’s end joint. The handrail is represented as a fixed cylindrical contact object. The simulation is performed in zero gravity so that the measured base motion comes from commanded actuation and contact interaction rather than conditions that would be seen on-Earth [ 4 ] . We evaluate both grippers under the same task sequence. While the gripper geometry and contact behavior differ, the perching task, rail location, and commanded arm motions are the same. This evaluation approach allows us to isolate the effect of the gripper at the end of the arm on contact-induced base motion. We log the Astrobee base position in the world frame during the pan and tilt motions. The