Finite-width adiabatic shear banding and dislocation patterning in mesoscale polycrystalline aggregates

Siddharth Singh, Rajat Arora, Janith Wanni, Charles Adkins, Raymond Rasmussen, Noah J. Schmelzer, Dan J. Thoma, Curt A. Bronkhorst, Amit Acharya · 2026

Read Finite-width adiabatic shear banding and dislocation patterning in mesoscale polycrystalline aggregates by Siddharth Singh, Rajat Arora, Janith Wanni, Charles Adkins, Raymond Rasmussen, Noah J. Schmelzer, Dan J. Thoma, Curt A. Bronkhorst, Amit Acharya (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2605-17619.txt.

Introduction

Singh and colleagues study dynamic shear banding in a grain aggregate using defect mechanics and experiments. The model uses a length scale tied to hardening from dislocation density, plus crystal plasticity with Voce-law strength. Simulations capture finite-width shear bands and low-angle subgrain boundaries even without heat conduction, plus size-dependent strengthening for grains from 1 to 20 micrometers. Large 3D runs with one million elements track strength, stress and temperature through large strains. Dislocation density piles up at grain edges and pattern interiors, showing change before failure.

Catalog record

CREATORSiddharth Singh, Rajat Arora, Janith Wanni, Charles Adkins, Raymond Rasmussen, Noah J. Schmelzer, Dan J. Thoma, Curt A. Bronkhorst, Amit Acharya
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE112956
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2605.17619

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Finite-width adiabatic shear banding and dislocation patterning in mesoscale polycrystalline aggregates Siddharth Singh, Rajat Arora, Janith Wanni, Charles Adkins, Raymond Rasmussen, Noah J. Schmelzer, Dan J. Thoma, Curt A. Bronkhorst, Amit Acharya Abstract Dynamic shear banding under adiabatic conditions in a mesoscale polycrystalline aggregate is studied using a model of mesoscale dislocation mechanics and experiments. The model involves a length scale related to hardening induced by excess/polar/geometrically necessary dislocation (GND) density, and utilizes a simple classical crystal plasticity model with isotropic Voce law hardening. Simulations of statistically representative volume elements of a polycrystal determined from experimental samples are conducted. Studies in 2-d (section) and 3-d capture the experimentally observed finite-width shear bands and the formation of low-angle subgrain boundaries even in the absence of heat conduction in the model, as well as size-dependent strengthening for grain sizes from 1 1 to 20 ​ μ ​ m 20\,\mu m . The 2-d and large-scale 3-d simulations, the latter involving 1 1 million finite elements, provide access to the progressive evolution of material strength, stress state, and temperature in the course of large deformations. GND distributions accumulate at grain boundaries and form patterned structures within grain interiors, offering insight into the microstructural changes that precede failure in adiabatic shear bands. Mesh-converged, delocalized and localized plastic flow to very large deformations without softening is observed for a significant range of parameters, reflecting a competition between GND hardening and thermal softening in setting the non-softening steady state in the absence of other ductile damage mechanisms in the model. 1 Introduction Adiabatic shear bands are a critical damage and failure mechanism in microstructural metals subjected to high-strain-rate loading [ 39 , 40 , 41 , 97 ] . In applications involving impact, ballistic penetration, high-speed machining, and crash worthiness, deformation occurs rapidly enough that heat generated by plastic work cannot diffuse away from the deforming region. Under these adiabatic conditions, thermal and recrystallization softening competes with strain and strain-rate hardening, resulting in the localization of deformation into narrow bands that often serve as precursors to fracture. Experiments reveal that these bands have a finite width and are accompanied by significant microstructural changes, including grain refinement and subgrain formation [ 41 , 66 , 36 , 54 , 53 , 70 , 71 , 72 ] . Understanding the formation and microstructural evolution of these adiabatic shear bands is therefore essential for predicting material performance under conditions of dynamic loading. The Split Hopkinson Pressure Bar (SHPB) has long served as the standard experimental technique for characterizing material response at strain rates of 10^{2} to 10^{4}\penalty\ s^{-1} [ 1 ] . Stress wave measurements in the input and output bars provide well-characterized loading conditions, and make SHPB experiments particularly suitable for studying shear band formation in a controlled and repeatable setting. When combined with the top-hat specimen geometry, which concentrates shear deformation within a narrow section of the sample by design, the technique enables localization to occur in a predetermined region. It also produces a nominally shear deformation state that isolates shear band behavior from competing deformation and damage modes [ 52 , 68 , 101 , 100 , 25 , 26 , 28 ] . However, post-mortem analysis reveals only the final microstructure, not the path that led to it. The progressive evolution of internal fields, from the onset of plastic instability to the formation of a mature shear band, remains inaccessible by experiment. Physical theory and simulation can address this gap by providing access to the full spatiotemporal evolution of these fields, while boundary conditions informed by experimental measurements enable validation against experimental observables. Early observations and understanding of shear bands under adiabatic dynamic conditions are due to Zener and Holloman [ 105 ] . The early theoretical foundations for understanding shear band formation under dynamic loading were established through linear stability and perturbation analyses [ 16 , 17 , 29 , 34 , 99 , 7 ] , which identified the competition between strain-rate hardening, thermal softening, and inertia as the governing factors. In [ 48 ] , Fressengeas and Molinari developed a modified linear stability approach using relative perturbations (absolute perturbations normalized by homogeneous solutions), demonstrating better agreement with nonlinear results. Fully nonlinear numerical simulations extended these insights beyond the linear regime [ 98 , 96 , 77 , 87 , 49 ] . Shawki and coworkers [ 88 , 89 ] developed energy-based criteria demonstrating that localization onset is controlled primarily by inertial forces. Early analytical work by Dodd and Bai [ 39 ] established that the shear band width is governed by the thermal length scale introduced through heat conduction, demonstrated later in computations by [ 30 ] . In a complementary line of work primarily in the quasi-static setting, Aifantis and Zbib [ 6 , 102 , 103 , 104 ] introduced strain gradients into the flow stress, with an associated length-scale required on dimensional grounds, and showed, through linear stability and nonlinear analyses, that this modification regularizes the localization problem and sets the shear band width. Comprehensive reviews of these early foundational works can be found in [ 88 ] , [ 97 ] , and [ 40 ] . More recent work has suggested a potential role of significant structural evolution within the material leading to adiabatic shear band formation and maturation [ 57 , 73 , 62 , 63 , 32 , 31 , 33 ] . Substantial questions remain about material structural evolution at high deformation rates related to adiabatic shear banding and experimental observations. More recent computational efforts have employed crystal plasticity frameworks to capture microstructural influences on shear band formation [ 95 , 56 , 24 ] . These studies have shown that shear bands can initiate near triple junctions and propagate across grain boundaries, and that texture evolution plays a critical role in localization. However, conventional crystal plasticity theories do not incorporate an intrinsic material length scale and thus cannot capture experimentally observed size-dependent strengthening at the micron scale and below. Various gradient plasticity theories [ 45 , 51 , 44 , 61 ] have been proposed to address this limitation which is also expected to affect the prediction of experimentally observed finite width of shear bands. However, an assessment of such models reveals that fundamental issues remain [ 74 , 10 ] , even apart from representing a physically direct association of the gradient effect with the mechanics of dislocation distributions. In the context of shear banding, Kuroda and Needleman [ 60 ] have studied higher-order gradient crystal plasticity in the context of dynamic tensile loading of planar single crystals, showing that the interaction between an inertia-induced length scale and the intrinsic material length scale can produce non-monotonic transitions in the localization mode with specimen size, and that the gradient theory regularizes shear band development. Mesoscale Field Dislocation Mechanics (MFDM) [ 3 , 5 ] offers an alternative that incorporates an intrinsic length scale through the work-hardening response of the material. That physical description requires the (magnitude of the) Burgers vector to enter into a coefficient that mediates the hardening produced due to geometrically necessary dislocations (GNDs), adapting the works of [ 67 , 43 , 2 ] to the setting of

Read the complete text